Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
The pairing of an AMD Ryzen 7 9850X3D with an Intel Arc B370 is a lopsided combination for Overpower: the processor sits in the 92nd percentile of all CPUs in the database, while the integrated Arc graphics land in just the 5th percentile of all GPUs. The measured data confirms what that imbalance suggests. At 1920x1080 on Low settings, the combo averages 65 FPS, the only tested configuration that clears the 60 FPS playability threshold. Every other resolution and preset combination falls short, bottoming out at 24 FPS average on Ultra at 3840x2160.
Similar Performance Alternatives
On the processor side, the Ryzen 7 9850X3D is practically indistinguishable from its nearest rivals in aggregate benchmark scoring. The database lists an Intel Xeon Platinum 8260M at an average score of 58323, a delta of only 0.1 percent from the 9850X3D's 58386. An Intel Xeon w5-2545 scores 58504, 0.2 percent higher, and an Intel Core i9-14900 lands at 58115, 0.5 percent lower. An AMD Ryzen AI 9 HX 470 scores 58826, 0.7 percent ahead. Any of these chips would deliver effectively identical CPU-side behavior in Overpower, because in this game the CPU is nowhere near the limiting factor.
The graphics side tells a different story. The Arc B370's only recorded synthetic result is a 3DMark Steel Nomad DX12 score of 1184, and its neighbors are telling: an ATI Mobility Radeon HD 5570 at 1186, an ATI Radeon HD 5570 at 1190, an AMD Radeon HD 7650M at 1192, and an AMD FirePro M2000 at 1168. All sit within roughly 1.4 percent of the B370. In other words, anyone running one of those aging mobile or workstation parts would see essentially the same Overpower framerates as this pairing. The B370 is a 25 W integrated solution with 1280 shading units, 40 TMUs, 20 ROPs, and 10 RT cores on the Xe3-LPG architecture, with system-shared memory, and its 6.144 TFLOPS of FP32 throughput defines the ceiling this combo hits in every test.
CPU and GPU Roles
The scaling data makes the bottleneck unambiguous: this is a GPU-bound configuration at every resolution. Dropping from 1920x1080 Low to 2560x1440 Low takes the average from 65 to 58 FPS, and pushing to 3840x2160 Low drops it further to 49 FPS. That resolution sensitivity is the signature of a graphics limit. A CPU-bound setup would show nearly flat framerates as resolution climbs, and that is not what the measurements show.
The preset scaling reinforces the point. At 1080p, moving from Low to Medium costs 24 FPS (65 down to 41), from Medium to High costs another 3 (41 to 38), and High to Ultra costs 7 more (38 to 31). The largest single penalty is the Low-to-Medium step, which typically reflects a shift in rendering quality that lands squarely on the shader and fill-rate resources of the GPU, both of which are scarce here given the 48 GPixel/s pixel rate and 96 GTexel/s texture rate.
Meanwhile, the Ryzen 7 9850X3D has headroom to spare. With 8 cores, 16 threads, a 5.60 GHz boost clock, and a 96 MB shared L3 cache, it posts a Cinebench R23 multi-core score of 22807 and a single-core score of 2228, plus a PassMark single-thread result of 4704. None of that capacity is being taxed by Overpower at these framerates. Swapping in any of the CPU rivals listed above, all within a percent of its 58386 average score, would change nothing.
Measured FPS Breakdown
All figures below are measured average framerates from the database; where minimum and maximum values were recorded, they are included.
1920x1080:
- Low: 65 FPS average (the only playable result, above the 60 FPS threshold)
- Medium: 41 FPS average, with a minimum of 34 and a maximum of 47
- High: 38 FPS average
- Ultra: 31 FPS average
2560x1440:
- Low: 58 FPS average, just under the threshold
- Medium: 36 FPS average, minimum 31, maximum 42
- High: 34 FPS average
- Ultra: 28 FPS average
3840x2160:
- Low: 49 FPS average
- Medium: 31 FPS average, minimum 26, maximum 35
- High: 28 FPS average
- Ultra: 24 FPS average
The pattern is consistent: each resolution step costs roughly 7 to 16 FPS at a given preset, and each preset step costs a few more. The 4K Medium result is instructive for frame stability, dipping to 26 FPS at minimum, which means perceptible stutter in an Action title. Even the single playable configuration, 1080p Low at 65 FPS, sits only 5 FPS above the threshold, so there is no margin for background load or demanding scenes.
FAQ
Q: Can the Ryzen 7 9850X3D and Arc B370 run Overpower at 60 FPS?
A: Yes, but only in one configuration: 1920x1080 at Low settings, averaging 65 FPS. Every other tested combination of resolution and preset falls below 60 FPS.
Q: Is 4K playable at all?
A: No. The best 3840x2160 result is 49 FPS on Low, and the worst is 24 FPS on Ultra. The 4K Medium measurement also shows a minimum of 26 FPS, well below a comfortable floor.
Q: Is the CPU holding this pairing back?
A: No. The 9850X3D ranks in the 92nd percentile of all CPUs, and framerates scale steeply with resolution and preset, which indicates a graphics limit. The Arc B370 sits in the 5th GPU percentile and is the clear bottleneck.
Q: How much does raising settings from Low to Ultra cost at 1080p?
A: Exactly 34 FPS on average, from 65 FPS at Low to 31 FPS at Ultra, more than halving the framerate.
Q: What CPUs would perform the same as the 9850X3D here?
A: The Intel Xeon Platinum 8260M, Intel Xeon w5-2545, Intel Core i9-14900, and AMD Ryzen AI 9 HX 470 all score within 0.7 percent of it in aggregate benchmarks, so game results would be effectively identical.
Q: Does the game run better at 1440p Low or 1080p Medium?
A: 1440p Low averages 58 FPS versus 41 FPS for 1080p Medium, a 17 FPS gap in favor of the lower preset at higher resolution.
How This Combo Ranks
Out of 3713 tested hardware combinations in Overpower, this pairing ranks 3427. That places it in the bottom few percent of all recorded combos for this game, despite featuring one of the stronger CPUs in the database. The rank is a direct reflection of the Arc B370's position: an integrated graphics solution with system-shared memory cannot keep pace with discrete cards in a game that punishes fill rate and shading throughput.
The lesson for builders is that rank in a game-specific chart is driven almost entirely by the weakest link. The 9850X3D contributes a Cinebench R23 multi-core score of 22807 and a PassMark multi-thread score of 41318, but none of that converts into frames when the GPU delivers under 50 FPS at every setting above 1080p. A combination ranked this low with a CPU this strong is a signal that the graphics side needs attention before any other upgrade.
Best Settings per Resolution
Based on the 60 FPS playability threshold and the recorded verdicts:
- 1920x1080: Low is the only playable preset, averaging 65 FPS. Medium drops to 41 FPS and cannot be recommended.
- 2560x1440: No preset reaches 60 FPS. The closest is Low at 58 FPS, which misses the threshold by 2 FPS; treat 1440p as unsupported for smooth play.
- 3840x2160: No playable settings. Low averages 49 FPS and Ultra falls to 24 FPS, so 4K is off the table entirely.
The practical takeaway: Overpower on this combo is a 1080p Low experience, full stop. The 5 FPS of headroom above the threshold at that setting is thin, and the recorded minimum at 1080p Medium (34 FPS) shows how quickly comfort erodes when settings move up. The Ryzen 7 9850X3D, a Zen 5 Granite Ridge chip on Socket AM5 with an unlocked multiplier and 96 MB of shared L3 cache, deserves a graphics partner far above the 5th percentile if Overpower is meant to be played at higher resolutions or presets.