Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

89%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
122 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
51 FPS

4K (Ultra HD)

Low 4K Measured
94 FPS
Ultra 4K Measured
46 FPS
14.1ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 37,943
Graphics Card
Required 27,382
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 55 60 94
1440p QHD 51 67 72 110
1080p Full HD 60 71 77 122

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 71
1920x1080 Low 122
1920x1080 Medium 77
1920x1080 Ultra 60
2560x1440 High 67
2560x1440 Low 110
2560x1440 Medium 72
2560x1440 Ultra 51
3840x2160 High 55
3840x2160 Low 94
3840x2160 Medium 60
3840x2160 Ultra 46

Performance Analysis: Overpower on Your System

The AMD Ryzen 7 9700X and Intel Arc B580 combination delivers a solid 1080p and 1440p gaming experience in Overpower, but 4K Ultra remains out of reach. Benchmark data shows the pairing is best suited for High settings at 1440p and below, where it maintains comfortable frame rates above the 60 FPS playability threshold. At 4K, only Low and Medium presets are viable, with Ultra dropping to an average of 46.3 FPS.

Similar Performance Alternatives

The CPU and GPU in this pairing each have closely matched rivals that would produce nearly identical in-game behavior. For the AMD Ryzen 7 9700X, the nearest competitor is the Intel Core i9-14901E, which scores an average of 37911 compared to the 9700X’s 37943, a negligible 0.1% difference. The AMD Ryzen AI 9 HX 370 is equally close at 37904 (0.1% delta), meaning any of these processors would yield virtually indistinguishable frame rates in Overpower. The Intel Core 5 211E (37829, 0.3% slower) and AMD Ryzen AI Embedded P132 (37804, 0.4% slower) are also within a fraction of a percent, so swapping in any of these four CPUs would not materially change performance.

On the graphics side, the Intel Arc B580’s average benchmark score of 23021 places it alongside some unexpected company. The AMD Radeon RX 580 2048SP scores 23061, just 0.2% higher, and the NVIDIA GeForce RTX 3080 scores 23172, 0.7% higher — despite the generational gap, these GPUs deliver comparable average frame rates in synthetic tests. The NVIDIA GeForce RTX 2080 (22895, 0.6% lower) and NVIDIA P106-100 (23249, 1% higher) round out the nearest rivals. In practical terms, a system built with any of these GPUs paired with the 9700X would land within a couple of frames per second of the Arc B580 across Overpower’s settings.

FAQ

Q: What is the best preset for 4K gaming with this combo?

A: At 3840x2160, the Medium preset delivers exactly 60 FPS on average, making it the highest playable setting. Low runs at 93.5 FPS, while High drops to 55.2 FPS and Ultra falls to 46.3 FPS.

Q: Can this system handle 1440p at Ultra settings?

A: No. At 2560x1440, Ultra produces an average of 51.3 FPS, which is below the 60 FPS playability threshold. The highest playable preset at this resolution is High, averaging 66.8 FPS.

Q: How does the Arc B580 compare to an RTX 3080 in synthetic benchmarks?

A: The Arc B580’s average benchmark score is 23021, while the RTX 3080 scores 23172 — a 0.7% difference. This places them as near-identical performers in aggregate testing, despite their architectural differences.

Q: What is the CPU’s single-thread performance like?

A: The Ryzen 7 9700X scores 1280 in 3DMark single-thread, 346 in Cinebench R15 single-core, 2211 in Cinebench R23 single-core, and 3023 in Geekbench single-core. These results reflect strong per-core capability for game logic and physics.

Q: Is the 9700X a high-end processor relative to all CPUs?

A: It sits in the 86th percentile among all CPUs, with an average benchmark score of 37943. Its closest rival, the Core i9-14901E, is only 0.1% behind.

Q: What memory bandwidth does the CPU support?

A: The Ryzen 7 9700X supports dual-channel DDR5 memory with a bandwidth of 89.6 GB/s. This is sufficient for feeding the Arc B580’s 456.0 GB/s frame buffer interface in most gaming scenarios.

Measured FPS Breakdown

At 1920x1080, the combo shows a clear progression across presets. Low settings run at 121.7 FPS average, giving substantial headroom above the 60 FPS threshold. Medium drops to 76.8 FPS, still comfortable, while High averages 71.1 FPS. Ultra is the only preset that dips below playability at 1080p, averaging 59.5 FPS — just short of the 60 FPS mark.

Moving to 2560x1440, the pattern shifts slightly. Low remains very fast at 110.1 FPS, Medium averages 71.5 FPS, and High delivers 66.8 FPS. Ultra falls to 51.3 FPS, which is 8.7 frames below the playability threshold. The gap between Medium and High at 1440p is just 4.7 FPS, suggesting the visual quality upgrade to High is nearly free in performance terms.

At 3840x2160, the demands of 4K become apparent. Low averages 93.5 FPS, which is still excellent, but Medium hits exactly 60 FPS — the precise boundary of playability. High drops to 55.2 FPS, and Ultra falls further to 46.3 FPS. The scaling from Low to Ultra at 4K is steep: a 47.2 FPS difference, representing a 50% performance penalty for maxed settings.

Notably, the data shows no minimum or maximum frame time values for any resolution or preset, so variability metrics are unavailable. The averages alone indicate that the Arc B580’s 12 GB GDDR6 memory and 456.0 GB/s bandwidth are sufficient for 1080p and 1440p, but 4K High and Ultra require more graphics throughput than this GPU can provide.

The Verdict

This PC can run Overpower at 60 FPS or higher across all three tested resolutions, but only at specific presets. At 1920x1080, the combination clears 60 FPS on Low (121.7 FPS), Medium (76.8 FPS), and High (71.1 FPS). Ultra just misses the mark at 59.5 FPS, making it a borderline case that most users would find acceptable despite the sub-60 average.

At 2560x1440, the playable presets are Low (110.1 FPS), Medium (71.5 FPS), and High (66.8 FPS). Ultra is not viable at 51.3 FPS. The 1440p High preset is the best balance, offering 6.8 FPS of headroom above the threshold while providing the most visual detail.

At 3840x2160, only Low (93.5 FPS) and Medium (60 FPS) are playable. High falls short at 55.2 FPS, and Ultra is well below at 46.3 FPS. The 4K Medium preset is exactly at the playability line, making it technically viable but with no margin for demanding scenes. For a consistent 4K experience, the Low preset is the safer choice.

The verdict by resolution is clear: 1080p High, 1440p High, and 4K Medium are the highest presets that achieve 60 FPS. Users targeting 4K Ultra or 1440p Ultra will need a more powerful GPU.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 71.1 FPS. This provides 11.1 FPS of headroom, making it the recommended setting for full HD gaming. The jump from High to Ultra costs 11.6 FPS, which pushes the average below the threshold.

At 2560x1440, High is again the best choice, averaging 66.8 FPS. This gives 6.8 FPS of margin, which is acceptable but tighter than at 1080p. Medium is the fallback at 71.5 FPS if more stability is desired, though the visual difference between Medium and High is typically modest.

At 3840x2160, the best playable preset is Medium, averaging exactly 60 FPS. This leaves zero headroom, so any scene complexity spike could drop the frame rate below the threshold. Low at 93.5 FPS is the safer alternative for 4K, but Medium offers the highest visual fidelity that remains technically playable.

How This Combo Ranks

Among all tested CPU-GPU combinations in Overpower, this pairing ranks 2832 out of 3713, placing it in the lower portion of the database. The rank reflects the Arc B580’s mid-tier standing (68th percentile among all GPUs) combined with the 9700X’s strong but not elite CPU position (86th percentile). The 12 GB VRAM and 456.0 GB/s bandwidth are adequate for 1080p and 1440p, but the GPU’s 13.67 TFLOPS FP32 throughput limits 4K performance.

The ranking suggests that while this combo is far from the top of the leaderboard, it is also not a bottom-tier pairing. The 881 combinations ranked below it would struggle more significantly with Overpower’s demands. For a system built around a $359 CPU and a $249 GPU, the measured results indicate a balanced pairing where neither component is the clear bottleneck at 1080p or 1440p High settings. The 4K results, however, show the GPU becoming the limiting factor, as the CPU’s 16 threads and 9771 max-thread 3DMark score provide ample processing headroom that the Arc B580 cannot fully utilize at higher resolutions.