Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
AMD Ryzen 7 9700X and Intel Arc B370 form an unusual pairing, as the CPU is a high-end desktop part while the GPU is an integrated-class graphics solution from the mobile lineup. The benchmark data for Overpower reveals a system that is heavily constrained by the graphics side, with the CPU’s strong multi-threaded performance offering little help in lifting frame rates. The recorded measurements show a clear picture: this combo can only reach playable levels at 1080p with the lowest settings, and even then it barely clears the 60 FPS threshold.
Measured FPS Breakdown
At 3840x2160, the results are uniformly below the playable threshold. With High settings, the average frame rate is 28 FPS. Dropping to Medium raises the average to 31 FPS, with a minimum of 26 FPS and a maximum of 35 FPS. Low settings improve the average to 49 FPS, but this still falls short of 60 FPS. Ultra is the worst performer, averaging just 24 FPS. The pattern across these presets shows that the GPU is the limiting factor, as the difference between Low and Ultra is only 25 FPS, a modest scaling range that suggests the renderer is bottlenecked by the Arc B370’s limited compute resources.
At 2560x1440, the situation improves slightly but remains below playable. High settings deliver an average of 34 FPS. Medium provides 36 FPS on average, with a minimum of 31 FPS and a maximum of 42 FPS. Low settings reach 58 FPS, which is close to 60 but not enough to be classified as playable. Ultra averages 28 FPS. The jump from Ultra to Low is 30 FPS, indicating that the preset choice has a significant impact, but the ceiling is still too low for smooth gameplay.
At 1920x1080, the only playable result appears. Low settings produce an average of 65 FPS, which exceeds the 60 FPS threshold. High settings average 38 FPS, Medium averages 41 FPS with a minimum of 34 FPS and a maximum of 47 FPS, and Ultra averages 31 FPS. The gap between Low and the next preset, Medium, is 24 FPS, showing that the Low preset is substantially lighter on the GPU. The data suggests that the Arc B370 has a hard performance ceiling around 65 FPS at the lowest settings, and any increase in graphical fidelity quickly drops the frame rate below 60.
FAQ
Q: Can this system run Overpower at 1920x1080 with High settings?
A: No. The recorded average FPS at 1080p High is 38, which is well below the 60 FPS playable threshold. Only the Low preset at 1080p meets the requirement.
Q: What is the best preset at 3840x2160?
A: Low settings provide the highest average FPS at this resolution, at 49 FPS. However, this is still not playable, as it does not reach the 60 FPS threshold.
Q: How much does lowering resolution help performance?
A: At Low settings, moving from 3840x2160 to 2560x1440 increases the average from 49 to 58 FPS, a gain of 9 FPS. Moving further to 1920x1080 raises it to 65 FPS, another 7 FPS gain. The scaling is present but modest, indicating a GPU-bound scenario.
Q: Is the Intel Arc B370 a discrete graphics card?
A: No. The data describes it as an integrated graphics processor (IGP) with a bus interface of IGP and system-shared memory. It belongs to the Arc Graphics-M generation for mobile devices.
Q: How does this combo rank against other tested systems for Overpower?
A: The combo ranks 3427 out of 3713 tested combinations, placing it in the lower percentile of all systems. This is consistent with the GPU’s low benchmark percentile.
Q: What is the minimum FPS recorded at 2560x1440 Medium?
A: The minimum FPS at 1440p Medium is 31, with an average of 36 and a maximum of 42. The minimum is below the average, but still above the lowest recorded minimum at 4K Medium, which is 26 FPS.
Similar Performance Alternatives
The nearest rivals for the AMD Ryzen 7 9700X are other high-end CPUs with very similar average benchmark scores. The Intel Core i9-14901E is 0.1% ahead, the AMD Ryzen AI 9 HX 370 is also 0.1% ahead, the Intel Core 5 211E is 0.3% ahead, and the AMD Ryzen AI Embedded P132 is 0.4% ahead. These deltas are negligible, meaning any of these CPUs would perform nearly identically in Overpower when paired with the same GPU. The CPU is not the bottleneck in this system, so swapping among these processors would yield no measurable FPS difference.
For the Intel Arc B370, the nearest rivals are all much older or lower-end graphics solutions. The ATI Mobility Radeon HD 5570 is 0.2% faster, the ATI Radeon HD 5770 is 0.5% faster, the AMD Radeon HD 7650M is 0.7% faster, and the AMD FirePro M2000 is 1.4% slower. These deltas are also small, suggesting that the Arc B370 performs at a level comparable to decade-old discrete GPUs or low-end mobile parts. In Overpower, any of these alternatives would produce similar frame rates, meaning the playability verdict would remain unchanged: only 1080p Low would clear 60 FPS.
The combination of a top-tier CPU with a bottom-tier GPU results in a system where the graphics card determines the experience. The CPU’s rivals are all modern high-end parts, while the GPU’s rivals are legacy products, underscoring the mismatch in this pairing. Users seeking higher frame rates would need to consider a different GPU entirely, as the CPU has ample headroom.
How This Combo Ranks
The combo ranks 3427 out of 3713 tested combinations for Overpower, placing it in the bottom 8% of all systems. This low rank is driven entirely by the GPU, which sits in the 5th percentile of all GPUs according to its benchmark score. The CPU, in contrast, is in the 86th percentile of all CPUs, showing a massive imbalance between components. The data indicates that the Arc B370 is the limiting factor, as the CPU’s high scores cannot compensate for the GPU’s low throughput.
In practical terms, this rank means that most other tested systems will deliver higher frame rates in Overpower. The only reason this combo scores any points at all is the CPU’s strong single-thread performance, which helps at lower resolutions where the GPU is less stressed. However, even at 1080p Low, the system only barely exceeds the 60 FPS threshold, and no other preset or resolution achieves playability. The ranking reflects a system that is fundamentally underpowered for this game, despite having a premium processor.
The Verdict
The data is unambiguous: this PC cannot run Overpower at 60 FPS for most configurations. At 3840x2160, no settings are playable, with the best case being Low at 49 FPS. At 2560x1440, the situation is the same, with Low reaching 58 FPS but still falling short. Only at 1920x1080 does the system clear the threshold, and only with Low settings, which average 65 FPS. High, Medium, and Ultra at 1080p all fail to reach 60 FPS, with averages of 38, 41, and 31 FPS respectively.
The verdict by resolution confirms this: playable settings are listed only for 1920x1080, and the best settings are Low with an average FPS of 65. For 2560x1440 and 3840x2160, there are no playable settings at all. This is a clear indication that the Arc B370 is not suitable for Overpower beyond the most minimal graphical configuration. Users with this combo should expect to play at 1080p Low, accepting reduced visual quality for acceptable frame rates.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Low, with an average of 65 FPS. This is the only playable configuration across all resolutions. Medium at 1080p averages 41 FPS, which is not playable, so there is no room to increase quality while maintaining 60 FPS.
At 2560x1440, no preset achieves 60 FPS. The closest is Low at 58 FPS, which is below the threshold. The best settings field is null, confirming that there is no playable configuration at this resolution.
At 3840x2160, the same applies. Low averages 49 FPS, Medium averages 31 FPS, High averages 28 FPS, and Ultra averages 24 FPS. None reach 60 FPS, and the best settings field is null. The recommendation is straightforward: 1080p Low is the only viable choice.
CPU and GPU Roles
The benchmark data reveals a stark division of labor in this system. The CPU, AMD Ryzen 7 9700X, has a high average benchmark score of 37943, placing it in the 86th percentile of all CPUs. Its nearest rivals are all within 0.4% of its score, indicating that it is a capable processor for any workload. However, in Overpower, the CPU’s role is largely irrelevant due to the GPU’s limitations.
The GPU, Intel Arc B370, has an average benchmark score of 1184, placing it in the 5th percentile of all GPUs. Its nearest rivals are all older or lower-end parts, with deltas under 1.5%. This GPU is the primary determinant of performance, as evidenced by the FPS scaling across resolutions and presets. Moving from 1080p to 1440p at Low settings reduces the average FPS from 65 to 58, a 10.8% drop. Moving from 1440p to 4K at Low settings reduces it from 58 to 49, a 15.5% drop. These reductions are consistent with a GPU that is bandwidth and compute limited, rather than a CPU that is struggling to feed frames.
The CPU’s influence is visible in the single-thread performance, which is strong, but this only helps at lower resolutions where the GPU is less saturated. At 1080p Low, the system reaches 65 FPS, which is likely close to the GPU’s maximum output. The CPU has no trouble keeping up, as its 3DMark single-thread score of 1280 is high. In contrast, at 4K Ultra, the GPU is overwhelmed, and the average FPS drops to 24, a 63% reduction from 1080p Low. This scaling shows that the GPU is the bottleneck at all resolutions, with the CPU having ample headroom.
The data implies that upgrading the GPU would yield significant FPS gains, while upgrading the CPU would have no measurable impact. The current combo is a classic case of pairing a high-end CPU with a low-end GPU, resulting in performance that is entirely constrained by the graphics solution. For Overpower, the CPU is essentially idle, and the GPU is working at its maximum capacity, which is simply not enough for playable frame rates beyond 1080p Low.