Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

41%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
72 FPS
Ultra 1080p Measured
35 FPS

1440p (2K / QHD)

Low 1440p Measured
64 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
23.8ms Frame Time
36ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 29,123
Graphics Card
Required 27,382
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 34 54
1440p QHD 31 37 40 64
1080p Full HD 35 42 45 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 42
1920x1080 Low 72
1920x1080 Medium 45
1920x1080 Ultra 35
2560x1440 High 37
2560x1440 Low 64
2560x1440 Medium 40
2560x1440 Ultra 31
3840x2160 High 32
3840x2160 Low 54
3840x2160 Medium 34
3840x2160 Ultra 26

Performance Analysis: Overpower on Your System

The AMD Ryzen 7 5800X and Intel Arc B390 combination is a study in contrast: the CPU is a strong, well-established desktop processor, while the GPU is an integrated graphics solution that ranks in the bottom percentile of all graphics cards. For the game Overpower, an action title released on August 14, 2023, the recorded data shows that this pairing is heavily restricted by the GPU, with playable frame rates only achievable at lower resolutions on the Low preset.

Similar Performance Alternatives

The database places the AMD Ryzen 7 5800X at the 81st percentile among all CPUs, with an average benchmark score of 29,123. Its nearest rivals in the recorded data include the Intel Core Ultra 5 135H, which scores 29,093 and is just 0.1% behind, meaning the two processors are effectively tied in aggregate performance. The Intel Xeon Phi 7210 scores 29,245, which is 0.4% higher, while the Intel Core i5-13500HX scores 29,270, a 0.5% advantage. The AMD Ryzen 5 5600XT scores 28,940, sitting 0.6% lower. These delta percentages are all within a single percentage point, so any of these four CPUs would behave nearly identically to the 5800X in a CPU-bound scenario. For Overpower, however, the CPU is rarely the limiting factor, as the GPU's low scores dominate the performance picture.

The Intel Arc B390, by contrast, is an integrated GPU (IGP) based on the Xe3-LPG architecture, with a 3 nm process node and a boost clock of 2500 MHz. Its average benchmark score is just 1,482, placing it at the 9th percentile of all GPUs. The nearest rivals are all older NVIDIA discrete parts, which gives context for its performance level. The NVIDIA GeForce GT 520MX scores 1,463, a 1.3% difference, while the GeForce 800M scores 1,460, a 1.5% difference. The GeForce GT 625 OEM scores 1,446, a 2.5% gap, and the GeForce GT 710 scores 1,443, a 2.7% gap. All four rivals are within 3% of the Arc B390, meaning that in synthetic 3DMark Steel Nomad DX12 testing, this integrated solution performs on par with those very low-end discrete GPUs from a past generation. For Overpower, users coming from any of those GPUs would see similar frame rates, while anyone expecting the Arc B390 to behave like a mid-range or high-end discrete card would be mistaken. The delta percentages are small enough that the practical difference between the B390 and its nearest rivals is negligible in real-world gaming.

CPU and GPU Roles

The benchmark data for this combination in Overpower clearly shows that the GPU is the bottleneck at every resolution and preset. The CPU, with 8 cores and 16 threads, a base clock of 3.80 GHz and a boost clock of 4.70 GHz, is far more capable than the integrated GPU. When examining scaling between resolutions, the frame rates drop significantly as resolution increases, which is a classic sign of GPU limitation. At 1920x1080 on Low settings, the average FPS is 72. Moving to 2560x1440 on Low, the average drops to 64, a reduction of 8 FPS or about 11%. At 3840x2160 on Low, the average falls to 54, another 10 FPS drop. This downward trend is consistent across all presets, indicating that the GPU's shading units, texture units, and raster operations are overwhelmed as pixel count rises.

The role of the CPU becomes more apparent when comparing presets at a fixed resolution. At 1920x1080, Low settings yield 72 FPS, Medium yields 45 FPS, High yields 42 FPS, and Ultra yields 35 FPS. The drop from Low to Medium is steep, a 27 FPS difference, which suggests that the Medium preset introduces rendering features that heavily tax the GPU. The CPU is not the constraint here because the 5800X has ample single-thread and multi-thread performance, as evidenced by its 3DMark scores: 943 in single-thread, 1,846 in 2-thread, 3,543 in 4-thread, 6,035 in 8-thread, and 7,586 in 16-thread tests. Those numbers indicate that even at lower resolutions where CPU overhead is more prominent, the processor can handle the game's logic and draw calls without becoming a bottleneck.

At higher resolutions, the GPU's role expands further. At 3840x2160, the frame rates across presets are 54 FPS on Low, 34 FPS on Medium, 32 FPS on High, and 26 FPS on Ultra. The gap between Low and Medium at 4K is 20 FPS, which is proportionally similar to the 1080p gap, but the absolute numbers are lower because the GPU is already near its limits. Meanwhile, the CPU's performance is constant regardless of resolution, so the scaling we observe is almost entirely attributable to the GPU's pixel throughput. The integrated memory system, which is shared and system-dependent, further compounds the issue at higher resolutions, as bandwidth constraints become more severe.

Measured FPS Breakdown

The recorded FPS data covers three resolutions and four settings, providing a clear picture of this system's limits. At 1920x1080, the Low preset delivers an average of 72 FPS, which is the best result in the entire dataset. The Medium preset averages 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS, showing some variance but staying below the 60 FPS threshold. High settings average 42 FPS, and Ultra averages 35 FPS. None of these higher presets have recorded min or max values, but the averages indicate a steady decline as graphical complexity increases.

At 2560x1440, the Low preset averages 64 FPS, which is above the playable threshold of 60 FPS. Medium averages 40 FPS, with a minimum of 34 FPS and a maximum of 46 FPS. High averages 37 FPS, and Ultra averages 31 FPS. The drop from Low to Medium at this resolution is 24 FPS, which is the largest single-step decline in the dataset, highlighting a significant jump in GPU workload between these presets. At 3840x2160, the Low preset averages 54 FPS, which is below 60 FPS and therefore not considered playable by the database's threshold. Medium averages 34 FPS, with a minimum of 29 FPS and a maximum of 39 FPS. High averages 32 FPS, and Ultra averages 26 FPS.

The variance at Medium settings is notable. At 1080p Medium, the range is 38 to 52 FPS, a 14 FPS spread. At 1440p Medium, the range is 34 to 46 FPS, a 12 FPS spread. At 4K Medium, the range is 29 to 39 FPS, a 10 FPS spread. This suggests that the game has dynamic scenes or effects that cause frame time spikes, but the overall pattern is consistent: the system can only maintain smooth gameplay on Low settings at 1080p and 1440p. The absence of min and max values for most presets means we only have averages to rely on, but those averages are enough to make definitive judgments about playability.

The Verdict

The question of whether this PC can run Overpower depends entirely on the resolution and settings. The database's verdict, based on a playable threshold of 60 FPS, states that at 3840x2160 there are no playable settings. The best average FPS at 4K is 54 on Low, which falls short of the required 60 FPS. At 2560x1440, the only playable setting is Low, with an average of 64 FPS. At 1920x1080, the only playable setting is also Low, with an average of 72 FPS. This means the system cannot run the game at Medium, High, or Ultra at any resolution while maintaining 60 FPS.

For a user with a 1080p monitor, the system is playable on Low settings, but there is no headroom for higher quality. The 72 FPS average on Low is comfortable, but switching to Medium drops to 45 FPS, which would be noticeable as stutter or reduced smoothness. At 1440p, Low settings provide 64 FPS, which is just above the threshold, but any increase in graphical fidelity or a demanding scene could push it below 60. At 4K, the system is not viable for this game, as even Low settings average 54 FPS and the minimum values are likely lower.

The overall combo rank in the game is 3,301 out of 3,713 combinations, placing this setup in the bottom 11% of all tested configurations. This is a direct consequence of the GPU's low percentile ranking. The CPU is not the issue; the 5800X is in the 81st percentile and can easily handle the game's demands. The integrated Arc B390, however, is in the 9th percentile, and that limitation dominates the performance profile. If the goal is to play Overpower smoothly, this system only works at 1080p or 1440p with the Low preset, and users should set their expectations accordingly.

FAQ

*Q: Can this PC run Overpower at 60 FPS on a 4K monitor?*

A: No. At 3840x2160, the best recorded average is 54 FPS on Low settings. Medium averages 34 FPS, High averages 32 FPS, and Ultra averages 26 FPS. None of these reach the 60 FPS playable threshold, so the database lists no playable settings at this resolution.

*Q: What is the best settings preset for 1440p gaming in Overpower?*

A: The only playable preset at 2560x1440 is Low, which averages 64 FPS. Medium averages 40 FPS, High averages 37 FPS, and Ultra averages 31 FPS, all below the 60 FPS threshold.

Q: How does the Intel Arc B390 compare to its nearest GPU rivals?

A: The Arc B390 has an average benchmark score of 1,482, placing it at the 9th percentile. Its nearest rivals are the NVIDIA GeForce GT 520MX with a 1.3% higher score, the GeForce 800M with a 1.5% higher score, the GeForce GT 625 OEM with a 2.5% higher score, and the GeForce GT 710 with a 2.7% higher score. All are within 3% of the B390, so they would perform similarly.

Q: Is the AMD Ryzen 7 5800X a strong CPU for gaming?

A: Yes, the 5800X is in the 81st percentile of all CPUs with an average benchmark score of 29,123. Its nearest rivals are within 0.6% of its score, including the Intel Core Ultra 5 135H and the AMD Ryzen 5 5600XT. For Overpower, the CPU provides more than enough processing power.

Q: Why does the frame rate drop so much when switching from Low to Medium settings?

A: At 1920x1080, the average FPS drops from 72 on Low to 45 on Medium, a 27 FPS decrease. At 2560x1440, it drops from 64 to 40, a 24 FPS decrease. At 3840x2160, it drops from 54 to 34, a 20 FPS decrease. This large step indicates that the Medium preset activates GPU-intensive features that the integrated Arc B390 cannot handle efficiently.

*Q: What is the best resolution for this system in Overpower?*

A: 1920x1080 on Low settings is the best option, with an average of 72 FPS. This is the highest frame rate recorded in the dataset and provides the most comfortable margin above the 60 FPS threshold. At 1440p on Low, the average is 64 FPS, which is playable but with less headroom.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that stays at or above 60 FPS. At 1920x1080, that preset is Low, with an average FPS of 72. This is the only setting at this resolution that clears the threshold; Medium averages 45 FPS, High averages 42 FPS, and Ultra averages 35 FPS, all of which are below 60. The Low preset provides a comfortable margin of 12 FPS over the requirement, making it the recommended choice for 1080p.

At 2560x1440, the best playable preset is also Low, with an average FPS of 64. This is a slimmer margin of just 4 FPS above the 60 FPS threshold, so users should be aware that demanding scenes could cause drops below the target. Medium averages 40 FPS, High averages 37 FPS, and Ultra averages 31 FPS, so there is no alternative preset that is playable at this resolution.

At 3840x2160, the database lists no playable settings, meaning there is no preset that achieves an average of 60 FPS. The closest is Low at 54 FPS, which is 6 FPS short. As such, the best settings for 4K would be to reduce the resolution to 1440p or 1080p and use Low, or to accept a sub-60 FPS experience on Low at native 4K. The data does not support any other configuration for this game with this hardware combination.