Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

36%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
72 FPS
Ultra 1080p Measured
35 FPS

1440p (2K / QHD)

Low 1440p Measured
64 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
23.8ms Frame Time
36ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 25,517
Graphics Card
Required 27,382
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 34 54
1440p QHD 31 37 40 64
1080p Full HD 35 42 45 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 42
1920x1080 Low 72
1920x1080 Medium 45
1920x1080 Ultra 35
2560x1440 High 37
2560x1440 Low 64
2560x1440 Medium 40
2560x1440 Ultra 31
3840x2160 High 32
3840x2160 Low 54
3840x2160 Medium 34
3840x2160 Ultra 26

Performance Analysis: Overpower on Your System

How This Combo Ranks

The AMD Ryzen 7 5700 paired with the Intel Arc B390 lands at rank 3301 out of 3713 tested combinations in the database for Overpower. This places the combo in the bottom 11 percent of all systems evaluated, a position driven almost entirely by the graphics processor. The CPU, by contrast, sits at the 78th percentile among all processors in the database, indicating that the processor itself is not the limiting factor in this pairing. The raw benchmark data reinforces this split: the Ryzen 7 5700 averages a score of 25517 across all tests, while the Arc B390 averages only 1482, which places the GPU at the 9th percentile among all graphics cards.

The combination's rank is therefore a story of extreme imbalance. A high-performing eight-core processor is shackled to a graphics solution that ranks in the bottom decile. In practical terms, this means the system's ability to run Overpower at high frame rates is constrained by the GPU at every resolution and preset tested. The CPU's nearest rivals in the database, including the Intel Xeon D-2752TER at a delta of -0.1 percent and the AMD Ryzen 5 6600H at -0.1 percent, all show nearly identical average scores, confirming that the processor's contribution to the overall combo rank is consistent with other mid-range CPUs. The GPU's nearest rivals, such as the NVIDIA GeForce GT 520MX (1.3 percent delta) and the GeForce GT 710 (2.7 percent delta), are all legacy or entry-level parts, which contextualizes the Arc B390's standing: it competes with hardware from a much older generation.

CPU and GPU Roles

Benchmark results indicate that the GPU dominates performance in Overpower across all tested resolutions. The strongest evidence comes from the measured FPS scaling: at 1920x1080 with Low settings, the combo achieves 72 FPS, but at 3840x2160 with the same preset, it drops to 54 FPS, a 25 percent reduction that cannot be attributed to the CPU, which has ample headroom. The CPU's 16 threads and high multi-threaded scores, such as 20655 in Cinebench R23 multi-core, are far beyond what Overpower requires, particularly at lower resolutions where the GPU is the bottleneck.

The resolution scaling reveals the GPU's limitations clearly. Between 1920x1080 and 2560x1440 at Low settings, the average FPS falls from 72 to 64, a drop of 11 percent. Between 2560x1440 and 3840x2160 at the same preset, the average falls from 64 to 54, a further 16 percent reduction. This pattern holds across all presets: at Medium, the averages are 45, 40, and 34 FPS for 1080p, 1440p, and 4K respectively; at High, they are 42, 37, and 32 FPS. The consistent degradation with each resolution step indicates that the GPU's shading units, texture units, and raster operations are saturated, while the CPU remains underutilized.

The CPU's role becomes more apparent only when considering the minimum frame times. At Medium settings, the recorded minimums are 38 FPS at 1080p, 34 FPS at 1440p, and 29 FPS at 4K. These minimums scale proportionally with resolution, again pointing to GPU-bound rendering. The CPU's single-thread performance, scoring 3296 in PassMark single-thread, is sufficient for the game's logic and draw-call processing. If the CPU were the bottleneck, the minimum FPS would not degrade so smoothly with resolution. The data therefore supports a clear conclusion: for this combo, the GPU is the sole performance limiter in Overpower, and the CPU's 8-core, 16-thread configuration provides no measurable constraint at any resolution or preset.

Best Settings per Resolution

At 3840x2160, no preset achieves the 60 FPS playable threshold. The highest average recorded is 54 FPS at Low settings, which falls short of the target. The next closest is Medium at 34 FPS, then High at 32 FPS, and Ultra at 26 FPS. The verdict data confirms that 4K is not viable for this combo, with no playable settings listed.

At 2560x1440, the Low preset is the only playable option, delivering an average of 64 FPS. This clears the 60 FPS threshold by 4 frames, but just barely. Medium drops to 40 FPS, High to 37 FPS, and Ultra to 31 FPS, all well below playable. The measured minimums at Medium (34 FPS) and the absence of minimum data for other presets suggest that even Low may experience occasional dips, but the average stays above the threshold.

At 1920x1080, the Low preset again is the only playable setting, with an average of 72 FPS. This is 12 FPS above the 60 FPS target, providing a modest margin. Medium averages 45 FPS, High averages 42 FPS, and Ultra averages 35 FPS. The Low preset at 1080p offers the best playable experience for this combo, with the highest average FPS across all tested configurations. No higher preset at any resolution reaches 60 FPS, so users must accept Low settings for a playable frame rate, even at the lowest resolution.

FAQ

Q: Can this combo run Overpower at 60 FPS on a 4K monitor?

A: No. The highest average FPS at 3840x2160 is 54 FPS on Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra presets yield 34, 32, and 26 FPS respectively.

Q: What is the best playable setting at 2560x1440?

A: Low settings are the only playable option at this resolution, achieving an average of 64 FPS. This clears the 60 FPS threshold, but Medium (40 FPS), High (37 FPS), and Ultra (31 FPS) all fall short.

Q: How does the combo perform at 1920x1080 with Medium settings?

A: Medium settings at 1080p average 45 FPS, with minimums of 38 FPS and maximums of 52 FPS. This is below the 60 FPS playable threshold, so Medium is not recommended for smooth gameplay.

Q: Which component limits performance in Overpower?

A: The Intel Arc B390 GPU is the limiting factor. The GPU ranks at the 9th percentile among all graphics cards, while the CPU ranks at the 78th percentile. FPS scales consistently with resolution, indicating GPU saturation rather than CPU limitation.

Q: Is the Low preset at 1080p consistently above 60 FPS?

A: The average FPS at 1920x1080 Low is 72, which is above the threshold. However, the database does not record minimum or maximum values for this preset, so the average is the only available metric.

Q: What are the nearest GPU rivals to the Arc B390?

A: The nearest rivals in the database are the NVIDIA GeForce GT 520MX (1.3 percent faster), the GeForce 800M (1.5 percent faster), the GeForce GT 625 OEM (2.5 percent faster), and the GeForce GT 710 (2.7 percent faster). All are within 3 percent of the Arc B390's score.

Measured FPS Breakdown

At 1920x1080, the combo records its best results. Low settings average 72 FPS, with no minimum or maximum recorded. Medium averages 45 FPS, with a minimum of 38 and a maximum of 52. High averages 42 FPS, with no range data. Ultra averages 35 FPS, also without range data. The gap between Low and Medium is 27 FPS, the largest single-preset jump in the dataset, indicating that the GPU's 24 raster operations units and 48 texture mapping units are quickly overwhelmed when quality settings increase.

At 2560x1440, performance drops across the board. Low averages 64 FPS, which is the only playable result at this resolution. Medium averages 40 FPS, with a minimum of 34 and a maximum of 46. High averages 37 FPS, and Ultra averages 31 FPS. The difference between Low and Medium is 24 FPS, slightly smaller than at 1080p, suggesting that resolution scaling compresses the preset differences as the GPU becomes more saturated.

At 3840x2160, the combo falls below playable thresholds everywhere. Low averages 54 FPS, which is the best result but still 6 FPS short of the target. Medium averages 34 FPS, with a minimum of 29 and a maximum of 39. High averages 32 FPS, and Ultra averages 26 FPS. The minimum FPS at Medium (29) is the lowest recorded value in the entire dataset, confirming that 4K gameplay will experience significant stutters even on modest settings.

The data shows a clear pattern: each resolution step reduces average FPS by roughly 10 to 15 percent at the same preset, and each preset step within a resolution reduces FPS by 10 to 20 percent. The GPU's performance ceiling is low, and the measured numbers reflect a part that is designed for basic rendering tasks, not demanding action games at high settings.

The Verdict

This PC can run Overpower, but only under strict conditions. At 1920x1080, the Low preset delivers 72 FPS on average, clearing the 60 FPS playable threshold with a 12 FPS margin. At 2560x1440, Low settings average 64 FPS, which is playable but with a narrower 4 FPS margin. At 3840x2160, no preset reaches 60 FPS; the best result is 54 FPS at Low, which falls short.

The verdict data confirms these findings: the 1080p and 1440p resolutions each list Low as the only playable setting, with average FPS of 72 and 64 respectively. The 4K resolution lists no playable settings. For a smooth experience, users must run the game at 1080p or 1440p with Low quality presets. Higher settings at any resolution result in frame rates between 26 and 45 FPS, which are below the playable threshold and will produce noticeable stutter and input lag.

The system is therefore playable for Overpower in a narrow configuration window. It is not suitable for high-refresh monitors, nor for users who prefer medium or high visual quality. The CPU has ample performance for this game, but the GPU's low pixel rate of 60.00 GPixel/s and texture rate of 120.0 GTexel/s, combined with its 1536 shading units, restrict the system to entry-level gaming. Users seeking higher quality settings would need a substantially more powerful graphics card.

Similar Performance Alternatives

The CPU's nearest rivals in the database are all within a fraction of a percent in average score. The Intel Xeon D-2752TER matches the Ryzen 7 5700 at a -0.1 percent delta, the AMD Ryzen 5 6600H is also -0.1 percent, the AMD Ryzen 5 7640U is +0.1 percent, and the AMD Ryzen 7 5825U is +0.3 percent. All four processors would deliver nearly identical CPU performance in Overpower, meaning that swapping the Ryzen 7 5700 for any of these would not change the combo's overall ranking or playable configurations. The choice of CPU is effectively irrelevant for this game given the GPU bottleneck.

The GPU's nearest rivals are all NVIDIA parts from older generations. The GeForce GT 520MX scores 1.3 percent higher than the Arc B390, the GeForce 800M scores 1.5 percent higher, the GeForce GT 625 OEM scores 2.5 percent higher, and the GeForce GT 710 scores 2.7 percent higher. These deltas are small enough that the Arc B390 and its rivals would produce nearly identical FPS numbers in Overpower. Users with any of these GPUs should expect the same playable settings: Low at 1080p and 1440p, with no playable option at 4K. The performance class is firmly entry-level, and the recorded measurements show that no member of this group can push the game beyond the Low preset while maintaining 60 FPS.