Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

42%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
72 FPS
Ultra 1080p Measured
35 FPS

1440p (2K / QHD)

Low 1440p Measured
64 FPS
Ultra 1440p Measured
31 FPS

4K (Ultra HD)

Low 4K Measured
54 FPS
Ultra 4K Measured
26 FPS
23.8ms Frame Time
36ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 29,713
Graphics Card
Required 27,382
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 32 34 54
1440p QHD 31 37 40 64
1080p Full HD 35 42 45 72

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 42
1920x1080 Low 72
1920x1080 Medium 45
1920x1080 Ultra 35
2560x1440 High 37
2560x1440 Low 64
2560x1440 Medium 40
2560x1440 Ultra 31
3840x2160 High 32
3840x2160 Low 54
3840x2160 Medium 34
3840x2160 Ultra 26

Performance Analysis: Overpower on Your System

The AMD Ryzen 5 9600X and Intel Arc B390 combination delivers a strictly entry-level gaming experience in Overpower, with the database measurements showing that only the lowest preset at 1080p and 1440p clears the 60 FPS playability threshold. This pairing ranks in the 3301st position out of 3713 tested combos, placing it in the bottom 11th percentile of all configurations recorded for this title. The Intel Arc B390, an integrated graphics solution based on the Xe3-LPG architecture, is the clear performance limiter here, as its 3DMark Steel Nomad DX12 score of 1482 puts it in the 9th percentile of all GPUs, while the Ryzen 5 9600X sits comfortably in the 81st percentile of all CPUs with an average benchmark score of 29713. The data indicates a system that can handle Overpower at its most forgiving settings, but anything beyond Low preset quality will struggle to maintain smooth frame rates.

Measured FPS Breakdown

The recorded data for this combo shows a clear pattern: as resolution increases, the already limited frame rates drop further, and as settings quality increases from Low to Ultra, performance degrades predictably. At 1920x1080, the lowest resolution tested, the system delivers 72 FPS average on Low settings, which is the only configuration at this resolution that meets the 60 FPS playability threshold. Moving to Medium settings at 1080p drops the average to 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS recorded. High settings at 1080p produce 42 FPS average, while Ultra settings bottom out at 35 FPS average. The gap between Low and Medium at 1080p is substantial, representing a 37.5% performance loss, and this pattern holds across all resolutions.

At 2560x1440, the system maintains 64 FPS average on Low settings, just barely clearing the 60 FPS threshold. The Medium preset at 1440p drops to 40 FPS average, with a minimum of 34 FPS and a maximum of 46 FPS. High settings at 1440p yield 37 FPS average, and Ultra settings fall to 31 FPS average. The difference between Low and Medium at 1440p is 24 FPS, a 37.5% reduction, mirroring the percentage loss seen at 1080p. This consistency suggests the GPU's shading units, 1536 in total, are the binding constraint when quality settings increase.

The 3840x2160 results show the most severe limitations. Low settings at 4K produce 54 FPS average, which falls short of the 60 FPS threshold but is still playable for less demanding scenarios. Medium settings at 4K drop to 34 FPS average, with a minimum of 29 FPS and a maximum of 39 FPS. High settings at 4K produce 32 FPS average, and Ultra settings bottom out at 26 FPS average. None of the 4K configurations meet the playability threshold, and the data suggests that even Low settings at 4K would require significant graphical compromises to approach smooth gameplay.

The Intel Arc B390's specifications explain these results. With 1536 shading units, 48 texture mapping units, and 24 raster operation units, the GPU has a pixel rate of 60.00 GPixel/s and a texture rate of 120.0 GTexel/s. The FP32 performance of 7.680 TFLOPS and FP16 performance of 15.36 TFLOPS (2:1) are modest figures for a modern gaming workload. The boost clock of 2500 MHz helps, but the system-shared memory architecture means bandwidth is dependent on the host system's RAM configuration, which can introduce variability in performance.

FAQ

*Q: Can this system run Overpower at 60 FPS at 1920x1080?*

A: Yes, but only on Low settings. The recorded data shows 72 FPS average at 1080p with Low settings. Medium settings drop to 45 FPS average, High settings to 42 FPS, and Ultra settings to 35 FPS, all of which fall below the 60 FPS playability threshold.

Q: What is the best playable setting at 2560x1440?

A: Low settings are the only playable option at 1440p, delivering 64 FPS average. Medium settings drop to 40 FPS, High to 37 FPS, and Ultra to 31 FPS, none of which meet the playability threshold.

Q: Is 4K gaming viable with this combo?

A: No. The database shows no playable settings at 3840x2160. Low settings produce 54 FPS average, which is below the 60 FPS threshold, and all higher settings fall further behind with Medium at 34 FPS, High at 32 FPS, and Ultra at 26 FPS.

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B390 scores 1482 in 3DMark Steel Nomad DX12, placing it just 1.3% ahead of the NVIDIA GeForce GT 520MX, 1.5% ahead of the NVIDIA GeForce 800M, 2.5% ahead of the NVIDIA GeForce GT 625 OEM, and 2.7% ahead of the NVIDIA GeForce GT 710. These are all entry-level or legacy GPUs, indicating the Arc B390's performance class.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 9600X has an average benchmark score of 29713, which is 0.2% ahead of the AMD Ryzen 7 PRO 5755GE, 0.5% ahead of the AMD Ryzen 7 7840H, 0.6% ahead of the AMD Ryzen 7 5800XT, and 0.8% ahead of the AMD Ryzen 7 8845HS. The CPU is clearly not the bottleneck in this configuration.

Q: What frame rates can be expected at Medium settings across all resolutions?

A: The recorded data shows 45 FPS average at 1080p, 40 FPS average at 1440p, and 34 FPS average at 4K. The minimum and maximum values are 38 to 52 FPS at 1080p, 34 to 46 FPS at 1440p, and 29 to 39 FPS at 4K.

Similar Performance Alternatives

Looking at the nearest rivals for both components, the CPU and GPU occupy very different performance tiers. The AMD Ryzen 5 9600X sits alongside other AMD processors with nearly identical average scores. The AMD Ryzen 7 PRO 5755GE scores 29656, just 0.2% behind the 9600X, while the AMD Ryzen 7 7840H scores 29868, 0.5% ahead. The AMD Ryzen 7 5800XT at 29879 is 0.6% ahead, and the AMD Ryzen 7 8845HS at 29955 is 0.8% ahead. These differences are within measurement noise, meaning any of these CPUs would produce nearly identical frame rates in Overpower when paired with the same GPU. The Ryzen 5 9600X's 6 cores and 12 threads, with a boost clock of 5.40 GHz, are more than sufficient for this title, as the game appears to be heavily GPU-bound.

The GPU situation is more concerning. The Intel Arc B390's nearest rivals are all NVIDIA products from a much older generation. The GeForce GT 520MX scores 1463, the GeForce 800M scores 1460, the GeForce GT 625 OEM scores 1446, and the GeForce GT 710 scores 1443. The Arc B390 leads all of them by margins between 1.3% and 2.7%, but these are not meaningful performance advantages. Any of these GPUs would produce similar results in Overpower, meaning the combination would still struggle to exceed Low settings at playable frame rates. The Arc B390's 80 W TDP and integrated graphics form factor, with no power connectors and a bus interface of IGP, place it firmly in the entry-level category.

For users considering alternatives, the data suggests that upgrading the GPU alone would yield the most significant improvement. The CPU's 81st percentile ranking among all CPUs indicates it has substantial headroom, while the GPU's 9th percentile ranking shows it is the limiting factor. The 3DMark Steel Nomad DX12 score of 1482 for the Arc B390 is the only GPU benchmark recorded, and its percentile versus all GPUs of 9 places it in the bottom decile of all tested graphics solutions.

How This Combo Ranks

The combination of the AMD Ryzen 5 9600X and Intel Arc B390 ranks 3301 out of 3713 tested combos in Overpower, placing it in the 89th percentile from the bottom. This ranking reflects the GPU's severe performance limitations rather than any deficiency in the CPU. The Ryzen 5 9600X's average benchmark score of 29713 and its 81st percentile ranking among all CPUs demonstrate that the processor is a capable mid-range part. The Intel Arc B390, however, with its 9th percentile ranking and 1482 Steel Nomad score, drags the overall system performance down dramatically.

The combo rank of 3301 out of 3713 means that approximately 89% of all tested configurations perform better than this one in Overpower. This places the system in the bottom tier of playable configurations, suitable only for the least demanding settings. The gap between the CPU's performance class and the GPU's performance class is substantial, and the overall ranking reflects this imbalance. For context, the CPU's nearest rivals all score within 0.8% of the 9600X, but the GPU's nearest rivals are all legacy or entry-level parts from NVIDIA, confirming that the Arc B390 is not in the same performance tier as the CPU.

The measured FPS data reinforces this ranking. At no resolution does the system exceed 72 FPS average, and that only occurs at 1080p with Low settings. The playable configurations, defined as those meeting or exceeding the 60 FPS threshold, are limited to Low settings at 1080p and 1440p. Every other combination of resolution and settings falls short. The 4K results are particularly telling, with even Low settings failing to reach 60 FPS, maxing out at 54 FPS average.

The Verdict

The AMD Ryzen 5 9600X and Intel Arc B390 can run Overpower, but only under strict conditions. The verdict data shows playable settings exist at two resolutions: 2560x1440 with Low settings produces 64 FPS average, and 1920x1080 with Low settings produces 72 FPS average. At 3840x2160, no settings achieve 60 FPS, with Low settings reaching only 54 FPS average. This means the system is viable for 1080p and 1440p gaming at the lowest quality preset, but 4K gaming is not playable at any setting.

The data indicates that this system is best suited for users who prioritize frame rate over visual fidelity. At 1080p Low, the 72 FPS average provides a smooth experience, and at 1440p Low, the 64 FPS average still meets the playability threshold, though with less headroom. Users who want to play at Medium settings or higher will need to accept frame rates in the 31 to 45 FPS range, which may be tolerable for some but falls short of the 60 FPS standard. The minimum recorded frame rates at Medium settings, 38 FPS at 1080p and 34 FPS at 1440p, indicate potential stutters during demanding scenes, while the maximum values of 52 FPS and 46 FPS respectively show that even the best-case scenarios cannot sustain 60 FPS.

The GPU's system-shared memory architecture and 80 W TDP contribute to its limitations. With no dedicated VRAM, the Arc B390 relies on the host system's memory bandwidth, which is described as system dependent. This can introduce variability in performance based on the RAM configuration, though the measured data represents the average expected results. The 12 RT cores and DirectX 12 Ultimate support provide modern feature compatibility, but the raw throughput of 7.680 TFLOPS FP32 is insufficient for demanding settings at higher resolutions.

Best Settings per Resolution

At 1920x1080, the best playable setting is Low, which delivers 72 FPS average. This is the only preset at this resolution that meets the 60 FPS threshold. Medium settings produce 45 FPS, High produces 42 FPS, and Ultra produces 35 FPS, all below the playability threshold. For users who must play at 1080p, Low settings are the only option for smooth gameplay, though the frame rate headroom of 12 FPS above the threshold provides some buffer for scene complexity variations.

At 2560x1440, the best playable setting is also Low, with 64 FPS average. This narrowly exceeds the 60 FPS threshold, leaving only 4 FPS of headroom. Medium settings at 1440p drop to 40 FPS, High to 37 FPS, and Ultra to 31 FPS. The limited headroom at 1440p Low means that particularly demanding scenes could potentially cause frame rates to dip below 60 FPS, though the recorded average suggests generally smooth performance. Users who prefer 1440p over 1080p will need to accept the tighter margin.

At 3840x2160, no setting is playable. Low settings produce 54 FPS average, which is 6 FPS below the threshold, and higher settings fall progressively further behind. Medium produces 34 FPS, High produces 32 FPS, and Ultra produces 26 FPS. The data clearly shows that 4K gaming is not viable with this combination in Overpower, and users with 4K displays should either lower the resolution or consider a different GPU. The frame rate deltas between settings at each resolution are consistent, with Medium typically delivering around 60-70% of Low's performance, High around 58-65% of Low's performance, and Ultra around 48-55% of Low's performance.