Overpower

The AMD Ryzen 5 8400F paired with the Intel Arc B570 delivers a mid-range 1080p and 1440p gaming experience in Overpower, with clear limitations emerging at 4K. Benchmark data for this specific combination shows that the system comfortably handles the game’s most demanding presets at 1080p, while 1440p requires a slight settings reduction, and 4K gaming is only viable on the Low preset. The measured performance places this combo in the lower-middle tier of tested systems, ranking 2987 out of 3713 combinations.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its strength. On the Low preset, the average frame rate is 110 FPS. Moving to Medium yields an average of 69 FPS, with a minimum of 59 FPS and a maximum of 79 FPS. The High preset maintains an average of 64 FPS. The Ultra preset, however, drops to an average of 53 FPS, which is below the 60 FPS playable threshold.

At 2560x1440, performance scales down predictably. The Low preset averages 98 FPS. The Medium preset delivers an average of 62 FPS, with a minimum of 52 FPS and a maximum of 71 FPS, which just clears the 60 FPS average threshold. The High preset falls to an average of 57 FPS. The Ultra preset averages 47 FPS, making it unsuitable for smooth play.

At 3840x2160, the GPU becomes the primary constraint. The Low preset is the only playable option, averaging 84 FPS. The Medium preset drops to an average of 52 FPS, with a minimum of 44 FPS and a maximum of 60 FPS. The High preset averages 49 FPS, and the Ultra preset averages just 40 FPS. None of the higher settings at this resolution approach the 60 FPS threshold.

The data reveals a consistent pattern: the delta between Low and Ultra settings is substantial at every resolution, but the relative cost of enabling Ultra increases with resolution. At 1080p, the gap between Low and Ultra is 57 FPS, while at 4K, it narrows to 44 FPS, indicating that resolution scaling has a greater impact on the GPU than settings scaling.

FAQ

*Q: Can this PC run Overpower at 1080p with High settings?*

A: Yes. The measured average frame rate at 1920x1080 with High settings is 64 FPS, which is above the 60 FPS playable threshold.

Q: What is the best playable preset at 2560x1440?

A: The Medium preset is the highest setting that maintains an average above 60 FPS at 1440p, delivering 62 FPS on average. The High preset falls short at 57 FPS.

Q: Is 4K gaming possible with this combo?

A: Only on the Low preset. At 3840x2160, the Low preset achieves an average of 84 FPS. All other presets (Medium, High, Ultra) fall below the 60 FPS threshold, with averages ranging from 40 to 52 FPS.

Q: How much performance is lost when moving from 1080p to 4K on the Low preset?

A: The average frame rate drops from 110 FPS at 1920x1080 to 84 FPS at 3840x2160 on the Low preset, a 26 FPS reduction.

Q: Does the Ultra preset ever reach 60 FPS at any resolution?

A: No. At every resolution tested, the Ultra preset averages below 60 FPS, with the highest result being 53 FPS at 1920x1080.

Q: What are the minimum frame rate figures for the Medium preset?

A: At 1080p, the minimum is 59 FPS. At 1440p, the minimum is 52 FPS. At 4K, the minimum is 44 FPS.

Similar Performance Alternatives

The CPU and GPU in this combo each have close rivals based on aggregate benchmark scores, meaning systems built with these alternative parts would likely produce similar frame rates in Overpower.

For the AMD Ryzen 5 8400F, the nearest rival is the AMD Ryzen 5 7500F, which scores 0.2% higher in average benchmark performance. The Intel Core i7-11850H and Intel Core i7-13620H are also nearly identical, with scores 0.3% and 0.4% higher, respectively. On the lower side, the AMD EPYC 9474F scores 0.4% lower. These differences are negligible, so swapping the 8400F for any of these processors would not materially change the gaming experience.

For the Intel Arc B570, the closest performance match is the NVIDIA GeForce RTX 3070 Mobile, which scores 0.1% higher. The Intel Arc A750 is also a direct competitor, scoring 0.1% lower. The NVIDIA Quadro M4000M scores 0.4% higher, and the AMD Radeon R9 M390X scores 0.5% lower. The Arc B570 sits squarely between these parts, so a system with an RTX 3070 Mobile or an Arc A750 would deliver nearly identical frame rates in Overpower.

The Verdict

This PC can run Overpower at 1080p and 1440p, but the playable settings differ by resolution. At 1920x1080, the system clears the 60 FPS threshold on Low, Medium, and High presets, with the High preset being the best playable option at 64 FPS. At 2560x1440, the Low and Medium presets are playable, with Medium being the best at 62 FPS. At 3840x2160, only the Low preset is playable, achieving 84 FPS.

The verdict data confirms that the system is not suited for high-fidelity 4K gaming. The Ultra preset is not playable at any resolution, as it fails to reach 60 FPS even at 1080p. For users prioritizing visual quality, sticking to 1080p High or 1440p Medium provides the best balance of image fidelity and smoothness. At 4K, the only option is to significantly reduce settings to Low, which sacrifices most visual enhancements for a playable frame rate.

CPU and GPU Roles

The performance scaling across resolutions indicates that the Intel Arc B570 GPU is the limiting factor as resolution increases. At 1080p Low, the system achieves 110 FPS, but at 4K Low, it drops to 84 FPS, a 24% reduction. This is a classic GPU-bound scaling pattern, where the CPU’s role diminishes as the pixel count rises.

Conversely, the CPU’s influence is more visible at lower resolutions and higher settings. At 1080p Ultra, the average frame rate is 53 FPS, which is only 48% of the Low preset’s 110 FPS. The AMD Ryzen 5 8400F, with its 6 cores and 12 threads, has enough headroom to feed the GPU at 1080p, as evidenced by the high Low preset numbers. However, the gap between Low and Ultra at 1080p (57 FPS) is larger than the gap between 1080p Low and 4K Low (26 FPS), suggesting that the GPU’s shader workload, rather than CPU throughput, is the primary bottleneck when enabling higher presets.

At 1440p, the Medium preset averages 62 FPS, which is only 3 FPS lower than the 1080p High preset’s 64 FPS. This indicates that the system balances CPU and GPU loads well at this resolution, but the GPU still dictates the ceiling. At 4K, the CPU is largely irrelevant, as all presets except Low fall below 52 FPS, and the GPU is clearly saturated.

How This Combo Ranks

The system ranks 2987 out of 3713 tested combinations in Overpower. This places it in the bottom 20% of all tested hardware pairs, which aligns with the measured performance: it can handle the game at 1080p and 1440p with settings adjustments, but it is far from a high-end configuration. The ranking reflects the combined capability of the Ryzen 5 8400F and Arc B570, where the GPU’s 65th percentile standing (vs all GPUs) and the CPU’s 77th percentile standing (vs all CPUs) do not translate into a top-tier gaming result for this specific title.

The rank is consistent with the observed frame rates. A combo ranked near the middle of the pack would likely hold 60 FPS at 1440p High or 4K Medium, but this system cannot, which is why it sits near the lower quartile. The 3713-combo pool includes many systems with higher-end GPUs, so the Arc B570’s limitations are the primary reason for this placement.

Best Settings per Resolution

For 1920x1080, the High preset is the most demanding option that stays at or above 60 FPS, achieving an average of 64 FPS. The Ultra preset is not viable, as it drops to 53 FPS.

For 2560x1440, the Medium preset is the best choice, averaging 62 FPS. The High preset falls to 57 FPS, just below the threshold.

For 3840x2160, the Low preset is the only playable setting, delivering an average of 84 FPS. The Medium preset’s 52 FPS average is not sufficient for smooth gameplay.

These settings represent the maximum visual quality that maintains an average frame rate above 60 FPS. Players who prefer higher presets at the cost of frame rate can experiment with the next tier up, but the data indicates that the system’s playable envelope is limited to these configurations.