Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

85%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
259 FPS
Ultra 1080p Measured
130 FPS

1440p (2K / QHD)

Low 1440p Measured
241 FPS
Ultra 1440p Measured
116 FPS

4K (Ultra HD)

Low 4K Measured
205 FPS
Ultra 4K Measured
99 FPS
6.4ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 26,324
Graphics Card
Required 27,382
Your GPU 54,247

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 99 119 128 205
1440p QHD 116 140 151 241
1080p Full HD 130 157 169 259

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 157
1920x1080 Low 259
1920x1080 Medium 169
1920x1080 Ultra 130
2560x1440 High 140
2560x1440 Low 241
2560x1440 Medium 151
2560x1440 Ultra 116
3840x2160 High 119
3840x2160 Low 205
3840x2160 Medium 128
3840x2160 Ultra 99

Performance Analysis: Overpower on Your System

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce RTX 4080 delivers an exceptionally high-performance foundation for Overpower, a 2023 action title. Benchmark measurements across three resolutions and four quality presets reveal that this combination not only clears the 60 FPS playability threshold but does so with substantial headroom, making it a formidable contender for high-refresh-rate displays. The data indicates a system that is heavily GPU-limited at higher resolutions, yet still provides triple-digit frame rates even under maximum graphical load.

Measured FPS Breakdown

At 3840x2160 (4K), the combination produces an average of 119 FPS on High settings, with the Medium preset showing a detailed range of 109 FPS minimum, 128 FPS average, and 147 FPS maximum. The Low preset pushes performance to a remarkable 205 FPS average, while the Ultra preset, the most demanding configuration, still achieves a 99 FPS average. This indicates that even at 4K, the RTX 4080 maintains a nearly 40 FPS buffer above the playability threshold at the highest settings.

Moving to 2560x1440 (1440p), the performance scales predictably upward. The Medium preset records a minimum of 128 FPS, an average of 151 FPS, and a maximum of 173 FPS. High settings produce a 140 FPS average, while Low settings reach a 241 FPS average. The Ultra preset delivers a 116 FPS average, which is a 17% improvement over the 4K Ultra result, demonstrating the resolution's reduced pixel load on the GPU.

At 1920x1080 (1080p), the frame rates become exceptionally high. The Medium preset shows a minimum of 144 FPS, an average of 169 FPS, and a maximum of 194 FPS. High settings average 157 FPS, and Low settings reach a 259 FPS average. The Ultra preset maintains a 130 FPS average, ensuring that even the most visually rich settings provide a smooth experience on standard 1080p monitors. Notably, the 1080p Ultra average of 130 FPS is 31 FPS higher than the 4K Ultra average, highlighting the direct relationship between resolution and performance headroom.

The data consistently shows a clear hierarchy: Low offers the highest frame rates, followed by High, then Medium, with Ultra being the most demanding. The gap between Medium and High is relatively small (e.g., 169 vs 157 FPS at 1080p), while the jump from High to Ultra is more pronounced, costing roughly 27 FPS at 1080p and 20 FPS at 4K.

CPU and GPU Roles

The performance scaling across resolutions strongly indicates that the NVIDIA GeForce RTX 4080 is the primary performance determinant in this configuration. The frame rate drop from 1080p to 4K at the same settings is substantial—for instance, Ultra averages fall from 130 FPS to 99 FPS, a 24% reduction. This pattern is classic GPU-bound behavior, where the increased pixel count at higher resolutions directly taxes the graphics card's shading and rasterization throughput.

The AMD Ryzen 5 7600, with its 6 cores and 12 threads, appears more than sufficient to feed the RTX 4080. Evidence for this comes from the relatively modest frame rate deltas between 1080p and 1440p. At Ultra settings, the 1440p average (116 FPS) is only 12% lower than the 1080p average (130 FPS), suggesting the CPU is still capable of keeping up with the GPU's output at the lower resolution. If the CPU were a bottleneck, one would expect a much smaller difference between 1080p and 1440p, as the GPU would be waiting on the processor. The fact that 1080p Low hits 259 FPS further proves the CPU can handle very high instruction throughput without becoming a limiting factor.

At 4K, the GPU's role becomes even more dominant. The difference between 1440p and 4K Ultra is 17 FPS (116 to 99), while the difference between 1080p and 1440p Ultra is only 14 FPS (130 to 116). This non-linear scaling points to the RTX 4080's workload becoming increasingly pixel-bound at 4K, with the CPU's contribution diminishing. The Ryzen 5 7600, with its 3.80 GHz base and 5.10 GHz boost clock, provides ample single-thread performance for game logic and draw calls, but the data shows that Overpower's frame rate is overwhelmingly dictated by the GPU's capabilities across all tested settings.

Similar Performance Alternatives

Based on the CPU's average benchmark score of 26,324, the nearest rivals are remarkably close in performance. The AMD Ryzen 9 6900HX scores 26,274, a mere 0.2% difference, indicating that users with this mobile flagship processor would experience nearly identical CPU-bound behavior in Overpower. Similarly, the Intel Core i9-11900KF scores 26,212, just 0.4% lower, and the AMD Ryzen 7 7435HS scores 26,402, only 0.3% higher. These sub-1% deltas mean that for this game, the choice among these processors would yield indistinguishable frame rates, as the GPU remains the limiting factor.

For the GPU, the NVIDIA GeForce RTX 4080 SUPER is the closest match, with an average score of 54,209 versus the RTX 4080's 54,247, a negligible 0.1% difference. This suggests that upgrading to the SUPER variant would offer no meaningful performance improvement in Overpower. Interestingly, the AMD Radeon RX 6750 GRE 12 GB posts a higher average score of 55,698, which is 2.6% above the RTX 4080, and the AMD Radeon 8060S scores 55,757, 2.7% higher. While these synthetic benchmark scores suggest slight advantages, the measured FPS data for this specific combo indicates that any of these GPUs would deliver frame rates well above the 60 FPS threshold, with the practical differences likely being a few frames per second in real-world gameplay.

How This Combo Ranks

This specific combination of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4080 holds the 240th position out of 3,713 tested combinations for Overpower. This places it in the top 6.5% of all configurations, a percentile ranking that underscores its high-end status. The percentileVsAllCpus score of 78 for the CPU and 86 for the GPU further contextualizes this, showing that while the processor is above average, the graphics card is significantly more exceptional relative to the broader hardware ecosystem.

The rank of 240 suggests that there are 239 other combos that perform better, likely featuring higher-tier GPUs like the RTX 4090 or newer flagship models. However, given that this combo already achieves 99 FPS at 4K Ultra, the performance gap to those higher-ranked systems is likely more academic than practical for most users. The data implies that this pairing is near the top of the performance curve for Overpower, with only a small fraction of enthusiast-level builds surpassing it.

The Verdict

Can this PC run Overpower? The data unequivocally says yes, and then some. According to the verdictByResolution data, all four settings—Low, Medium, High, and Ultra—are playable at every tested resolution. The playable threshold is 60 FPS, and this combination clears it by a wide margin in all scenarios.

At 3840x2160, the Ultra preset averages 99 FPS, which is 65% above the threshold. At 2560x1440, the Ultra preset averages 116 FPS, a 93% margin. At 1920x1080, the Ultra preset averages 130 FPS, more than doubling the threshold. The best settings per resolution are consistently Ultra, with the lowest average being 99 FPS at 4K. This means users can enable the highest graphical fidelity without ever dropping below a smooth, playable frame rate. The minimum FPS recorded at 4K Medium (109 FPS) and 1440p Medium (128 FPS) also stay well above 60, suggesting that even momentary dips in complex scenes will not cause stuttering or discomfort.

FAQ

*Q: What is the highest average FPS this combo achieves in Overpower?*

A: The highest average is 259 FPS, achieved at 1920x1080 with Low settings.

Q: Is the Ultra preset playable at 4K resolution?

A: Yes, the 4K Ultra preset produces an average of 99 FPS, which is comfortably above the 60 FPS playable threshold.

Q: How does the RTX 4080 compare to the RTX 4080 SUPER in this game?

A: The RTX 4080 has an average benchmark score of 54,247, while the RTX 4080 SUPER scores 54,209, a 0.1% difference. This suggests virtually identical performance in Overpower.

Q: What is the minimum FPS recorded for the Medium preset at 2560x1440?

A: The minimum FPS for 2560x1440 Medium is 128 FPS, with an average of 151 FPS and a maximum of 173 FPS.

Q: Does the CPU bottleneck the GPU at 1080p?

A: No. The 1080p Low preset achieves 259 FPS, and the gap between 1080p and 1440p results is consistent with GPU-bound scaling. The Ryzen 5 7600 provides sufficient throughput to avoid bottlenecking the RTX 4080.

Q: What is the combo's rank among all tested configurations?

A: This combo ranks 240th out of 3,713 tested combinations, placing it in the top 6.5% of all systems tested for Overpower.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 99 FPS. This provides the full visual experience while maintaining a 39 FPS buffer above the threshold.

At 2560x1440, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average of 116 FPS. The 56 FPS buffer ensures smooth gameplay even during intense action sequences.

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 130 FPS. The 70 FPS buffer makes this configuration ideal for high-refresh-rate 1080p monitors (up to 120Hz or 144Hz), as the frame rate rarely, if ever, dips below the display's refresh cycle. In all cases, Ultra is the recommended setting, as the hardware's performance headroom makes compromises unnecessary.