Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Similar Performance Alternatives
The CPU and GPU in this system each sit near specific comparison points in the database. For the AMD Ryzen 5 7400F, the recorded average benchmark score is 32750, placing it at the 83rd percentile among all CPUs. Its nearest rivals are tightly clustered: the Intel Core i5-14600T scores 32707 (0.1% lower), the Intel Core Ultra 7 155H scores 32697 (0.2% lower), the AMD Ryzen 7 PRO 6850H scores 32812 (0.2% higher), and the AMD Ryzen AI 7 PRO 360 scores 32662 (0.3% lower). These four alternatives bracket the 7400F within a range of less than half a percent, meaning any of them would deliver nearly identical CPU-bound behavior in this game. In practice, a system built around any of these processors would show similar frame rates when the GPU is not the limiting factor, which is rarely the case for this particular title at higher settings.
For the Intel Arc B370, the situation is more stark. Its average benchmark score is 1184, placing it at only the 5th percentile among all GPUs. The nearest rivals are all older or lower-tier parts: the ATI Mobility Radeon HD 5570 scores 1186 (0.2% higher), the ATI Radeon HD 5770 scores 1190 (0.5% higher), the AMD Radeon HD 7650M scores 1192 (0.7% higher), and the AMD FirePro M2000 scores 1168 (1.4% lower). These deltas are tiny, but the absolute performance level is what matters. The Arc B370 is positioned far below modern discrete graphics solutions, and its nearest rivals are legacy parts from over a decade ago. For Overpower specifically, the GPU will be the bottleneck in almost every scenario, and swapping in any of these near-identical alternatives would produce statistically indistinguishable results.
Best Settings per Resolution
The database records measured frame rates for Overpower across three resolutions and four quality presets. The playable threshold is defined as 60 FPS average. At 1920x1080, the only settings that clear this bar is Low, which delivers an average of 65 FPS. Medium at 1080p drops to 41 FPS, High to 38 FPS, and Ultra to 31 FPS. None of the higher presets reach the 60 FPS threshold, so the best playable setting at 1080p is Low with 65 FPS.
At 2560x1440, the results are worse across the board. Low averages 58 FPS, just two frames short of the 60 FPS target. Medium averages 36 FPS, High 34 FPS, and Ultra 28 FPS. Since no preset at this resolution reaches 60 FPS, the database records no playable settings for 1440p. The best-case scenario is Low at 58 FPS, but that still misses the threshold.
At 3840x2160, the situation is worse still. Low averages 49 FPS, Medium 31 FPS, High 28 FPS, and Ultra 24 FPS. No preset at 4K comes close to 60 FPS, and the database confirms no playable settings at this resolution. The most demanding preset that stays at or above 60 FPS only exists at 1080p, and that preset is Low.
FAQ
Q: Can this PC run Overpower at 1080p?
A: Yes, but only at Low settings. The measured average frame rate at 1920x1080 with Low settings is 65 FPS, which clears the 60 FPS playable threshold. Medium, High, and Ultra all fall below 60 FPS, with averages of 41, 38, and 31 FPS respectively.
Q: What frame rate does the system achieve at 1440p?
A: At 2560x1440, the best average is 58 FPS on Low settings, which is two frames short of the 60 FPS threshold. Medium averages 36 FPS, High 34 FPS, and Ultra 28 FPS. No settings preset reaches 60 FPS at this resolution.
Q: Is 4K playable on this hardware?
A: No. At 3840x2160, the highest average is 49 FPS on Low settings. Medium averages 31 FPS, High 28 FPS, and Ultra 24 FPS. The database records no playable settings at 4K for this combination.
Q: How does the Arc B370 compare to other GPUs in the database?
A: The Arc B370 sits at the 5th percentile among all GPUs, with an average benchmark score of 1184. Its nearest rivals, such as the ATI Radeon HD 5770 (1190, 0.5% higher) and the AMD Radeon HD 7650M (1192, 0.7% higher), are all within 1.4% of its score, indicating a very low absolute performance level.
Q: What is the CPU's relative standing in the database?
A: The AMD Ryzen 5 7400F is at the 83rd percentile among all CPUs, with an average benchmark score of 32750. Its nearest rival, the AMD Ryzen 7 PRO 6850H, scores 32812, which is 0.2% higher, while the Intel Core i5-14600T sits 0.1% lower at 32707.
Q: Which resolution and settings combination gives the highest average frame rate?
A: The highest recorded average is 65 FPS at 1920x1080 with Low settings. This is the only measured combination that exceeds the 60 FPS playable threshold across all resolutions and presets.
The Verdict
The data is unambiguous: this system can run Overpower, but only under tightly constrained conditions. The verdict by resolution states that 1920x1080 with Low settings is the sole playable combination, delivering an average of 65 FPS. At 2560x1440, no settings preset reaches 60 FPS, and at 3840x2160, the same is true with even lower averages. The playable settings list is empty for both 1440p and 4K.
For a practical builder, this means the AMD Ryzen 5 7400F is more than adequate for the CPU side of the workload, but the Intel Arc B370 is the limiting factor. The CPU's 83rd percentile ranking among all processors indicates headroom that the GPU simply cannot exploit. At 1080p Low, the system scrapes past the 60 FPS mark, but any attempt to raise visual quality immediately drops the frame rate below playability. At 1440p Low, the average is 58 FPS, which is a near miss but still below the threshold. If the goal is a stable 60 FPS at higher visual settings, this GPU needs to be replaced or the resolution must stay at 1080p with the lowest preset.
The recorded data also shows that the Arc B370's performance class is extremely low, at the 5th percentile among all GPUs. This is not a matter of fine-tuning or driver optimization; the hardware simply lacks the throughput for demanding presets. The CPU, by contrast, is a solid mid-range part that would pair well with a much faster GPU in future upgrades. For Overpower specifically, the answer is a conditional yes: it runs at 1080p Low, and nowhere else.
Measured FPS Breakdown
The database provides the following measured averages for Overpower across all resolution and settings combinations. At 3840x2160, High averages 28 FPS, Low averages 49 FPS, Medium averages 31 FPS with a minimum of 26 and a maximum of 35, and Ultra averages 24 FPS. At 2560x1440, High averages 34 FPS, Low averages 58 FPS, Medium averages 36 FPS with a minimum of 31 and a maximum of 42, and Ultra averages 28 FPS. At 1920x1080, High averages 38 FPS, Low averages 65 FPS, Medium averages 41 FPS with a minimum of 34 and a maximum of 47, and Ultra averages 31 FPS.
The pattern is consistent: each step up in resolution costs roughly 10 to 20 percent of the frame rate at the same settings, and each step up in quality within a resolution costs a similar amount. The only combination that crosses the 60 FPS line is 1080p Low at 65 FPS. The closest miss is 1440p Low at 58 FPS, which is within 3.3% of the threshold but still not playable by the database's definition. The largest gap between settings is at 4K, where Low (49 FPS) is nearly double Ultra (24 FPS), indicating that the GPU is heavily strained by the higher preset's shading and texture work.
For the Medium presets, the database also records minimum and maximum frame rates, which show the variation: at 1080p Medium, frames range from 34 to 47; at 1440p Medium, from 31 to 42; and at 4K Medium, from 26 to 35. These ranges are wide enough that even the 1080p Medium average of 41 FPS would feel inconsistent, with dips below 35 FPS during heavy scenes. The Low preset at 1080p has no recorded min or max, but the average of 65 FPS suggests a more stable experience, though the lack of min/max data means the database cannot confirm frame time consistency.
How This Combo Ranks
In the database's ranking of tested CPU and GPU combinations for Overpower, this system ranks 3427 out of 3713 combinations. That places it in the bottom 8 percent of all recorded setups, which aligns with the GPU's low percentile and the measured frame rates. The CPU alone would rank much higher, but the combined score reflects the GPU bottleneck.
The rank of 3427 out of 3713 means there are 286 combinations that perform worse, but the overwhelming majority of tested systems deliver better results. This is not a competitive gaming rig by any standard, but it is also not the absolute floor. The nearest GPU rivals, such as the ATI Radeon HD 5770 and the AMD Radeon HD 7650M, are within 0.7% of the Arc B370's benchmark score, so systems using those GPUs would likely land in the same ranking neighborhood. The CPU's nearest rivals, all within 0.3% of its score, would not move the ranking meaningfully either.
For the builder, the takeaway is that the AMD Ryzen 5 7400F is a strong foundation, but the Intel Arc B370 drags the overall combination down to the bottom decile. If the goal is to play Overpower at a stable 60 FPS, this system barely meets the minimum at 1080p Low. If the goal is to play at higher presets or higher resolutions, the GPU must be upgraded. The CPU has the headroom to support a much faster graphics card, so the upgrade path is clear. The data shows that this combo is functional but limited, and the ranking reflects that reality.