Overpower

The AMD Ryzen 5 5600 and Intel Arc B570 combination delivers a playable experience in Overpower across most common resolutions, but the data shows that 4K gaming is strictly limited to the Low preset. The measured frame rates indicate a system that scales predictably with resolution and quality settings, with the sweet spot landing at 1440p Medium or 1080p High, both of which clear the 60 FPS playability threshold with a comfortable margin.

Similar Performance Alternatives

The nearestRivals data places both components in a tightly contested performance tier. The AMD Ryzen 5 5600 holds an average benchmark score of 20468, ranking in the 74th percentile of all CPUs. Its closest rival, the Intel Core Ultra 7 258V, scores 20454, a delta of just 0.1 percent; the AMD Ryzen 5 8500G follows at 20425 (0.2 percent lower), while the AMD EPYC 9454P matches at 20422 (0.2 percent lower) and the AMD EPYC 7713 trails at 20363 (0.5 percent lower). Practically speaking, any of these processors would deliver near-identical CPU-bound behavior in Overpower, meaning the frame rate differences between them would be negligible in most scenarios.

On the graphics side, the Intel Arc B570 posts an average benchmark score of 20556, placing it in the 65th percentile of all GPUs. The comparison field is remarkably close: the NVIDIA GeForce RTX 3070 Mobile scores 20534 (0.1 percent higher), the Intel Arc A750 scores 20582 (0.1 percent lower), the NVIDIA Quadro M4000M scores 20480 (0.4 percent lower), and the AMD Radeon R9 M390X scores 20662 (0.5 percent lower). The Arc B570 sits in a dead heat with these alternatives; none of them would move the needle more than a frame or two in Overpower at any given setting. For users considering a comparable build, swapping to the Arc A750 or a mobile RTX 3070 would yield essentially identical performance characteristics, assuming the rest of the system remains unchanged.

Best Settings per Resolution

The measured FPS data reveals a clear hierarchy of playable settings. At 3840x2160, the only preset that maintains an average above the 60 FPS threshold is Low, which delivers 84 FPS on average. The Medium preset falls to 52 FPS, High drops to 49 FPS, and Ultra bottoms out at 40 FPS. For 4K gaming, Low is the definitive choice; no other setting reaches the playability bar.

At 2560x1440, the system offers two viable options. Low runs at 98 FPS average, while Medium holds at 62 FPS average, making Medium the best playable setting at this resolution. The High preset slips to 57 FPS, just under the threshold, and Ultra drops to 47 FPS. For users who prioritize visual quality over raw headroom, Medium at 1440p is the optimal balance, providing a 62 FPS average with minimums of 52 FPS and maximums of 71 FPS.

At 1920x1080, the story improves further. Low produces 110 FPS, Medium delivers 69 FPS, and High reaches 64 FPS, all clearing the 60 FPS mark. Ultra falls short at 53 FPS. The best playable setting is High, which offers the richest visual fidelity while maintaining a 64 FPS average. Notably, the 1080p Medium preset shows a minimum of 59 FPS, meaning it dips just below the threshold in the worst-case frames, whereas High has no reported minimums below the playable line.

CPU and GPU Roles

The scaling between resolutions and presets indicates that the GPU is the dominant constraint at higher resolutions, while the CPU provides a stable foundation across all settings. The frame rate drop from 1080p to 1440p at the same preset is consistent: High falls from 64 FPS to 57 FPS (a 10.9 percent reduction), Medium from 69 to 62 (10.1 percent), Low from 110 to 98 (10.9 percent), and Ultra from 53 to 47 (11.3 percent). This uniform scaling suggests the graphics card is the limiting factor, as the CPU has ample headroom to feed frames at both resolutions.

The jump from 1440p to 4K is more severe, reinforcing the GPU bottleneck. High drops from 57 to 49 FPS (14.0 percent), Medium from 62 to 52 (16.1 percent), Low from 98 to 84 (14.3 percent), and Ultra from 47 to 40 (14.9 percent). The steeper decline at 4K aligns with the Arc B570’s 10 GB memory buffer and 160-bit bus, which struggle to sustain bandwidth-heavy workloads at ultra-high resolutions. The Ryzen 5 5600’s six cores and 12 threads, paired with its 32 MB L3 cache, are sufficient to avoid CPU-bound scenarios; no preset shows a plateau that would indicate a processor limitation.

The delta between Low and Ultra at each resolution also highlights the GPU’s role. At 1080p, Ultra is 51.8 percent slower than Low (53 vs 110 FPS); at 1440p, the gap widens to 52.0 percent (47 vs 98); at 4K, it reaches 52.4 percent (40 vs 84). This consistent percentage drop suggests the Arc B570’s shading units and ROPs are the primary constraint, as the relative cost of higher-quality settings remains proportional regardless of resolution. The CPU’s benchmark scores, which show strong multi-threaded performance (Cinebench R23 multi-core at 18309), indicate it is not a limiting factor in any tested configuration.

The Verdict

This PC can run Overpower, but the playable envelope is narrower at higher resolutions. According to the verdictByResolution data, 3840x2160 supports only the Low preset, which achieves an 84 FPS average. The Medium, High, and Ultra presets all fall below the 60 FPS playable threshold, with averages of 52, 49, and 40 FPS respectively. For 4K owners, the system is functional but visually compromised.

At 2560x1440, the system clears 60 FPS on Low (98 FPS) and Medium (62 FPS), with High narrowly missing at 57 FPS and Ultra at 47 FPS. The best playable setting is Medium, offering a 62 FPS average. At 1920x1080, High is the best playable preset at 64 FPS, with Low at 110 FPS and Medium at 69 FPS also viable; Ultra remains below the threshold at 53 FPS. Overall, the system is well-suited for 1080p gaming with high settings and 1440p gaming with medium settings, but 4K requires significant compromises.

Measured FPS Breakdown

The following table summarizes all measured frame rates from the FACT PACK. Note that minimum and maximum values are only reported for the Medium preset at each resolution; all other presets list only the average.

3840x2160 (4K)

• Low: 84 FPS average
• Medium: 52 FPS average, 44 FPS minimum, 60 FPS maximum
• High: 49 FPS average
• Ultra: 40 FPS average

2560x1440 (1440p)

• Low: 98 FPS average
• Medium: 62 FPS average, 52 FPS minimum, 71 FPS maximum
• High: 57 FPS average
• Ultra: 47 FPS average

1920x1080 (1080p)

• Low: 110 FPS average
• Medium: 69 FPS average, 59 FPS minimum, 79 FPS maximum
• High: 64 FPS average
• Ultra: 53 FPS average

The Medium preset data provides the only visibility into frame time consistency. At 1080p, the minimum of 59 FPS is just one frame below the playable threshold, indicating occasional stutter. At 1440p, the minimum drops to 52 FPS, a 16.1 percent variance from the average. At 4K, the minimum of 44 FPS represents a 15.4 percent dip from the 52 FPS average. These variance levels are typical for a mid-range GPU under load.

FAQ

Q: What is the best playable setting at 1920x1080?

A: High is the best playable preset at 1080p, delivering a 64 FPS average. Low (110 FPS) and Medium (69 FPS) also clear the 60 FPS threshold, while Ultra falls short at 53 FPS.

*Q: Can this system run Overpower at 4K with high settings?*

A: No. At 3840x2160, the High preset averages 49 FPS, which is below the 60 FPS playable threshold. Only Low (84 FPS) is playable at 4K; Medium (52 FPS) and Ultra (40 FPS) are not.

Q: How does the Intel Arc B570 compare to the Intel Arc A750?

A: The Arc B570 has an average benchmark score of 20556, while the Arc A750 scores 20582. This represents a 0.1 percent difference, meaning the two GPUs perform nearly identically in synthetic tests and would likely produce similar frame rates in Overpower.

Q: What is the minimum FPS recorded at 2560x1440 Medium?

A: The minimum FPS at 1440p Medium is 52, while the average is 62 and the maximum is 71. This indicates that frame rates can dip below the playable threshold in demanding scenes, even though the average is above 60.

Q: Is the AMD Ryzen 5 5600 a bottleneck for the Intel Arc B570?

A: The data does not suggest a CPU bottleneck. The Ryzen 5 5600 scores 18309 in Cinebench R23 multi-core and ranks in the 74th percentile of all CPUs. Frame rates scale consistently with resolution and settings, which is characteristic of a GPU-limited system.

*Q: How many total component combinations does this PC rank in for Overpower?*

A: This CPU and GPU combination ranks 2987 out of 3713 total combos tested for the game. This places it in the lower portion of the ranking, reflecting its mid-range positioning relative to all possible system configurations.