Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
FAQ
Q: Can this PC run Overpower at 1080p?
A: Yes, at 1920x1080 with Low settings the combo produces an average of 65 FPS, which clears the 60 FPS playable threshold. High, Medium, and Ultra presets at 1080p all fall below 60 FPS, with averages of 38, 41, and 31 FPS respectively.
Q: What is the best playable setting at 2560x1440?
A: There is no playable setting at 2560x1440. All four presets (Low, Medium, High, Ultra) produce averages below the 60 FPS threshold, with Low being the fastest at 58 FPS and Ultra the slowest at 28 FPS.
Q: How does the Intel Arc B370 compare to other GPUs in the database?
A: The Arc B370 ranks in the 5th percentile of all GPUs, with an average benchmark score of 1184. Its nearest rivals include the ATI Mobility Radeon HD 5570 (score 1186, 0.2% faster) and the ATI Radeon HD 5770 (score 1190, 0.5% faster).
Q: What is the CPU's position relative to other processors?
A: The AMD Ryzen 5 4600G sits in the 71st percentile of all CPUs, with an average benchmark score of 17507. Its closest competitors include the AMD Ryzen 3 PRO 5355GE (0.1% faster) and the Intel Core 7 150U (0.6% faster).
Q: Does the Arc B370 have dedicated video memory?
A: No, the GPU uses system shared memory. Its memory size, type, bus width, and bandwidth are all marked as system shared or system dependent, and its base clock is 300 MHz with a boost clock of 2400 MHz.
Q: Is there a 4K playable option in Overpower?
A: No. At 3840x2160, even Low settings only reach 49 FPS average. Medium averages 31 FPS, High averages 28 FPS, and Ultra averages 24 FPS, all well below the 60 FPS threshold.
How This Combo Ranks
The database places this CPU and GPU pairing at rank 3427 out of 3713 tested combos for Overpower. That puts it in the bottom 8% of all configurations tested, which aligns with the measured results showing limited playability.
The rank reflects the combination of a mid-range CPU (71st percentile) with a GPU that sits near the bottom of the database (5th percentile). The Arc B370's average benchmark score of 1184 places it among legacy graphics hardware from over a decade ago, based on the nearest rival data. The CPU's 17507 average score is more respectable, but in gaming workloads the GPU becomes the limiting factor at higher resolutions and presets.
This is a combo where the whole is weaker than the CPU component alone might suggest. The rank of 3427 out of 3713 means there are only 286 tested configurations that perform worse, and the majority of those likely pair similarly weak GPUs with even older processors. For a 2023 action title like Overpower, this position indicates the system is positioned for basic playability at low settings and modest resolutions, not for high-refresh or high-fidelity experiences.
Measured FPS Breakdown
3840x2160 (4K): The data shows no playable settings at this resolution. Low settings deliver 49 FPS average, which is the best result but still 11 FPS short of the 60 FPS threshold. Medium averages 31 FPS with a minimum of 26 and maximum of 35. High averages 28 FPS, and Ultra drops to 24 FPS. The gap between Low and Medium is substantial at 18 FPS, indicating that the GPU struggles significantly once quality settings increase.
2560x1440 (1440p): Low settings come closest to playability with 58 FPS average, just 2 FPS below the threshold. Medium averages 36 FPS with a minimum of 31 and maximum of 42. High averages 34 FPS, and Ultra averages 28 FPS. The pattern mirrors 4K: Low is workable for near-60 experiences, but every step up in quality costs roughly 6 to 8 FPS.
1920x1080 (1080p): This is the only resolution with a playable configuration. Low settings produce 65 FPS average, clearing the threshold by 5 FPS. Medium averages 41 FPS with a minimum of 34 and maximum of 47. High averages 38 FPS, and Ultra averages 31 FPS. The jump from Low to Medium costs 24 FPS, which is a steep penalty and suggests the Arc B370 lacks the fill rate or bandwidth for higher-quality rendering even at 1080p.
Across all resolutions, the scaling is consistent: Low to Medium is a large drop, Medium to High is a smaller drop, and High to Ultra is another moderate drop. The minimum and maximum FPS figures for Medium settings show tight ranges (26 to 35 at 4K, 31 to 42 at 1440p, 34 to 47 at 1080p), indicating relatively stable frame pacing rather than severe stuttering.
Similar Performance Alternatives
Looking at the nearest rivals for both components gives a sense of what other hardware would behave similarly in Overpower.
On the CPU side, the Ryzen 5 4600G (17507 average score) sits between the AMD Ryzen 3 8300GE (17614, 0.6% faster) and the Intel Core 7 150U (17395, 0.6% slower). The AMD Ryzen 3 PRO 5355GE (17482) is effectively tied at 0.1% slower. These processors would produce nearly identical CPU-bound results in this game, meaning if the combo were paired with the same Arc B370, the FPS numbers would be within a couple of frames.
On the GPU side, the Arc B370 (1184 average score) is bracketed by the ATI Mobility Radeon HD 5570 (1186, 0.2% faster), the ATI Radeon HD 5770 (1190, 0.5% faster), and the AMD Radeon HD 7650M (1192, 0.7% faster). The AMD FirePro M2000 (1168) is 1.4% slower. These are all legacy GPUs, which reinforces that the Arc B370's gaming performance is comparable to hardware from roughly a decade earlier. Any of these alternatives paired with a similar CPU would deliver essentially the same frame rates in Overpower.
A system using the Ryzen 3 8300GE or Ryzen 3 PRO 5355GE with the Arc B370 would land within a few FPS of this combo at every resolution and preset. Likewise, swapping the Arc B370 for the ATI Radeon HD 5770 would produce nearly identical results, with the HD 5770 being 0.5% faster on average.
CPU and GPU Roles
The data reveals a clear GPU-bound system at higher resolutions, but the CPU's role becomes more relevant at 1080p Low.
Resolution scaling tells the story. At 4K Low, the combo hits 49 FPS; at 1440p Low it improves to 58 FPS; at 1080p Low it reaches 65 FPS. That is a 16 FPS gain from 4K to 1080p, which shows the GPU is the primary bottleneck. If the CPU were limiting, the frame rates would stay flat across resolutions.
The preset scaling at 1080p is particularly telling. Low delivers 65 FPS, but Medium drops to 41 FPS, a 37% reduction. This steep penalty for modest quality increases indicates the GPU's 1280 shading units, 40 texture mapping units, and 20 raster operation units are insufficient for the additional texture and shading work at Medium and above. The Arc B370's 6.144 TFLOPS FP32 throughput and 96 GTexel/s texture rate are simply not enough for higher-quality rendering in a 2023 action title.
At 4K, the situation is more extreme. Low produces 49 FPS, and Medium drops to 31 FPS, a 37% reduction again. The consistency of that percentage across resolutions suggests the GPU's architecture scales predictably with workload increases.
The CPU's contribution is visible in the 1080p Low result. The Ryzen 5 4600G's 6 cores and 12 threads, boosting to 4.20 GHz, provide enough throughput to push the Arc B370 to 65 FPS at 1080p Low. The CPU's Cinebench R23 multicore score of 13593 and single-core score of 1919 indicate adequate processing power for feeding a GPU of this class. At higher resolutions, the GPU saturates first, so the CPU has headroom that goes unused.
For players targeting 60 FPS, the key takeaway is that the GPU dictates playability. Only 1080p Low reaches the threshold, and the CPU is not the limiting factor at any resolution above that.
The Verdict
This PC can run Overpower, but only under a narrow set of conditions. The verdict by resolution is clear: at 3840x2160 and 2560x1440, there are no playable settings. Every preset at both resolutions falls below the 60 FPS threshold, with the best case being 1440p Low at 58 FPS, which is 2 FPS short.
At 1920x1080, the system achieves playability on Low settings only, with an average of 65 FPS. The database lists Low as the best playable setting and the only one that clears 60 FPS. Medium (41 FPS), High (38 FPS), and Ultra (31 FPS) all remain firmly below the threshold.
The practical verdict: this combo is suited for 1080p gaming at minimum quality settings in Overpower. The 65 FPS average at 1080p Low provides a playable experience, though the 24 FPS drop when moving to Medium means there is no headroom for quality adjustments. Users who want higher presets or higher resolutions would need a significantly stronger GPU.
For a game released in 2023, the Arc B370's performance profile, ranking in the 5th percentile of all GPUs and comparable to legacy ATI Radeon HD 5000-series parts, makes this a marginal configuration. The CPU is capable enough, sitting in the 71st percentile and outperforming several recent low-power processors, but it cannot compensate for the GPU's limitations. Players should expect to run Overpower at 1080p Low to maintain 60 FPS, and should not expect viable performance at 1440p or 4K.