Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

61%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
125 FPS
Ultra 1080p Measured
60 FPS

1440p (2K / QHD)

Low 1440p Measured
111 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
95 FPS
Ultra 4K Measured
46 FPS
13.9ms Frame Time
21ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 17,035
Graphics Card
Required 27,382
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 46 55 59 95
1440p QHD 54 65 70 111
1080p Full HD 60 72 78 125

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 72
1920x1080 Low 125
1920x1080 Medium 78
1920x1080 Ultra 60
2560x1440 High 65
2560x1440 Low 111
2560x1440 Medium 70
2560x1440 Ultra 54
3840x2160 High 55
3840x2160 Low 95
3840x2160 Medium 59
3840x2160 Ultra 46

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

Starting with the highest resolution, 3840x2160, the AMD Ryzen 5 3600 and Intel Arc B580 combination delivers a spread of results that narrows as settings climb. At Low settings, the average frame rate sits at 95 FPS, which is comfortably above the 60 FPS playability threshold. Moving to Medium settings, the average drops to 59 FPS, with a minimum of 50 FPS and a maximum of 68 FPS. High settings produce an average of 55 FPS, while Ultra settings bring the average down to 46 FPS. The data shows a clear pattern: at 4K, this combo can only sustain smooth gameplay when visual demands are minimized.

At 2560x1440, the picture improves noticeably. Low settings average 111 FPS, making it the fastest preset at this resolution. Medium settings average 70 FPS, with a minimum of 59 FPS and a maximum of 80 FPS. High settings average 65 FPS, which still clears the 60 FPS threshold. Ultra settings, however, fall to 54 FPS on average, missing the mark. The transition from 4K to 1440p reveals a substantial gain in headroom, allowing the user to choose higher presets without sacrificing playability.

At 1920x1080, the combination reaches its best overall performance. Low settings average 125 FPS, the highest recorded figure across all resolutions and presets. Medium settings average 78 FPS, with a minimum of 66 FPS and a maximum of 90 FPS. High settings average 72 FPS, and Ultra settings average exactly 60 FPS. The 1080p results indicate that this hardware pairing can handle even the most demanding preset, though just barely at the threshold. The minimum and maximum values recorded at Medium settings across all resolutions show a consistent pattern: the gap between minimum and maximum widens as resolution decreases, with 1080p showing a 24 FPS spread compared to 18 FPS at 1440p and 18 FPS at 4K.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Low, with an average of 95 FPS. This leaves a comfortable margin above the threshold, but the next step up, Medium, falls to 59 FPS, just one frame short. The verdict data confirms Low as the best playable setting at 4K.

At 2560x1440, the best settings option is High, averaging 65 FPS. This preset clears the 60 FPS line with a small buffer. Medium also qualifies at 70 FPS, and Low averages 111 FPS, but High represents the most visually demanding choice that remains playable. Ultra, at 54 FPS, does not qualify.

At 1920x1080, the best settings option is Ultra, averaging exactly 60 FPS. This is the only resolution where the maximum preset reaches the playability threshold. High, Medium, and Low all also qualify, with averages of 72 FPS, 78 FPS, and 125 FPS respectively, but Ultra is the pick for maximum visual fidelity. The data indicates that 1080p is the sweet spot for this combo, where the hardware can stretch to its full graphical potential.

CPU and GPU Roles

The measured FPS scaling between resolutions and presets reveals which component carries more weight in Overpower. At 4K, the average frame rate at Low settings is 95 FPS. Dropping to 1440p at the same preset raises that to 111 FPS, an increase of about 17 percent. At 1080p Low, the average reaches 125 FPS, another gain of about 13 percent. This scaling pattern suggests that the GPU is the primary constraint at higher resolutions, as frame rates climb steadily when pixel count decreases.

Preset scaling tells a similar story. At 4K, moving from Low to Medium cuts the average from 95 FPS to 59 FPS, a drop of 36 FPS. From Medium to High, the average falls to 55 FPS, and from High to Ultra, it drops to 46 FPS. The steep decline between Low and Medium at 4K points to the GPU being heavily taxed by increased visual effects. At 1440p, the same preset climb goes from 111 FPS at Low to 70 FPS at Medium, then 65 FPS at High, and 54 FPS at Ultra. The drop from Low to Medium is again the largest single step, a loss of 41 FPS. At 1080p, Low averages 125 FPS, Medium 78 FPS, High 72 FPS, and Ultra 60 FPS. The Low to Medium gap at 1080p is 47 FPS, the largest of any resolution.

These numbers indicate that the CPU, a 6-core, 12-thread Zen 2 part, provides enough headroom to keep up with the GPU at lower resolutions and settings. The Ryzen 5 3600 has a multi-thread score of 15045 in Cinebench R23 and a single-thread score of 2124, which places it in the 71st percentile among all CPUs. The Intel Arc B580, with a 3DMark Steel Nomad DX12 score of 3068 and a Passmark G3D score of 15748, sits in the 68th percentile among GPUs. At 1080p, the combination reaches 125 FPS at Low settings, suggesting neither component is a severe bottleneck at that configuration. At 4K, however, the GPU becomes the limiting factor, as the frame rate ceiling drops sharply regardless of the CPU's capabilities.

The fact that Ultra settings at 1080p hit exactly 60 FPS, while Ultra at 1440p falls to 54 FPS and Ultra at 4K drops to 46 FPS, reinforces the interpretation that the GPU dominates the performance curve. The CPU's role appears secondary, primarily ensuring that frame times remain stable at lower resolutions where the GPU has spare capacity.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 5 3600 has an average benchmark score of 17035. The Intel Core i7-1260P scores 17007, a difference of 0.2 percent, meaning it would behave nearly identically in CPU-bound scenarios. The Intel Core i5-11400 scores 17067, also 0.2 percent higher. The AMD EPYC 7573X scores 17070, and the AMD EPYC 7742 scores 16998, both within 0.2 percent of the Ryzen 5 3600. For gaming purposes, any of these processors would produce similar frame rates in Overpower when paired with the same GPU, since the margin between them is negligible.

On the GPU side, the Intel Arc B580 has an average benchmark score of 23021. The AMD Radeon RX 580 2048SP scores 23061, a 0.2 percent difference. The NVIDIA GeForce RTX 2080 scores 22895, which is 0.6 percent lower. The NVIDIA GeForce RTX 3080 scores 23172, 0.7 percent higher. The NVIDIA P106-100 scores 23249, 1 percent higher. These deltas are all small, so swapping the Arc B580 for any of these cards would yield essentially the same performance in Overpower, assuming the rest of the system remains unchanged.

The practical implication is that the Ryzen 5 3600 and Arc B580 combo sits in a crowded performance band. Users with any of these rival CPUs or GPUs can expect comparable results, with differences of at most about 1 percent. The bottleneck analysis from the measured FPS data suggests that the GPU choice matters more at higher resolutions, so a GPU with a slightly higher score, such as the RTX 3080, might push 4K Medium from 59 FPS to just over 60 FPS, though the difference would be marginal.

FAQ

Q: Can this PC run Overpower at 4K with High settings?

A: No. At 3840x2160 with High settings, the average frame rate is 55 FPS, which falls below the 60 FPS playability threshold. Low settings are required for 4K playability, averaging 95 FPS.

Q: What is the best settings preset at 1440p?

A: High settings at 2560x1440 average 65 FPS, making it the most demanding preset that stays at or above 60 FPS. Medium also qualifies at 70 FPS, and Low averages 111 FPS.

Q: Does the CPU or GPU limit performance in Overpower?

A: The recorded data indicates the GPU is the primary constraint. Frame rates scale significantly with resolution changes and preset changes, while the CPU, with a 71st percentile rank, appears sufficient to avoid major bottlenecks, especially at lower resolutions.

Q: Is Ultra settings playable at 1080p?

A: Yes, but just barely. At 1920x1080 with Ultra settings, the average frame rate is exactly 60 FPS, meeting the playability threshold. Higher resolutions do not qualify for Ultra.

Q: How does this combo compare to an RTX 3080 pairing?

A: The Intel Arc B580 has an average benchmark score of 23021, while the RTX 3080 scores 23172, about 0.7 percent higher. In Overpower, the difference would be minimal, likely not changing the verdict at any resolution.

Q: What is the playable threshold for this game?

A: The database uses 60 FPS as the playability threshold. Any preset with an average frame rate at or above 60 FPS is considered playable. At 4K, only Low qualifies; at 1440p, High, Medium, and Low qualify; at 1080p, all four presets qualify.

The Verdict

The AMD Ryzen 5 3600 and Intel Arc B580 combination can run Overpower, but the experience depends heavily on resolution and settings. At 3840x2160, only Low settings clear the 60 FPS threshold, with an average of 95 FPS. Medium settings fall one frame short at 59 FPS, and High and Ultra are not playable. For users targeting 4K, the game is playable only with reduced visual fidelity.

At 2560x1440, the verdict is more favorable. High settings average 65 FPS, giving a small margin above the threshold. Medium averages 70 FPS, and Low averages 111 FPS. Ultra settings at 54 FPS do not qualify. This resolution offers a good balance between visual quality and smoothness.

At 1920x1080, the combination fully meets the playability criteria. Ultra settings average exactly 60 FPS, making it the best choice for maximum visual detail. High averages 72 FPS, Medium 78 FPS, and Low 125 FPS. Users at 1080p can comfortably enable the highest preset and still stay playable, though the frame rate is right at the edge, so any demanding scene could push it lower.

In summary, this PC is best suited for 1080p gaming with Ultra settings, 1440p gaming with High settings, or 4K gaming with Low settings. The data shows a clear gradient: the higher the resolution, the more settings must be dialed back to maintain 60 FPS.

How This Combo Ranks

In the database for Overpower, this combination of AMD Ryzen 5 3600 and Intel Arc B580 ranks 2788 out of 3713 tested combos. That places it in the lower half of all tested configurations, roughly in the 25th percentile of the tested pool. The rank reflects the overall performance across all recorded scenarios, weighted by the playability verdicts at each resolution.

Given that the CPU sits in the 71st percentile among all CPUs and the GPU in the 68th percentile among all GPUs, the combo rank of 2788 might seem lower than expected. The explanation lies in the measured FPS data: while the individual components are mid-to-upper tier, the combination struggles at higher resolutions, particularly 4K, where only Low settings are playable. Many other combos in the database likely achieve better 4K results, pulling the rank down.

The rank also implies that a large number of tested systems outperform this pairing in Overpower. However, the verdict data shows that the combo is fully playable at 1080p and 1440p with appropriate settings, so the rank should be interpreted as a measure of overall capability, not a statement of unplayability. For users with a 1080p or 1440p monitor, this rank is less concerning. For those targeting 4K, the rank correctly signals that this setup is not ideal for high-detail gaming at that resolution. The combination of a capable CPU and a capable GPU delivers solid mid-range performance, but it does not reach the upper echelons of the tested hardware pool.