Overpower

Similar Performance Alternatives

The AMD Ryzen 5 2600 sits close to several other processors in average benchmark scores. The Intel Core Ultra 5 228V trails it by just 0.2%, while the Intel Core i9-11900H is 0.5% behind. On the other side, the Intel Xeon D-1746TER is 0.7% ahead, and the AMD EPYC 9454 leads by 1.2%. These deltas are all within a narrow band, so a system built around any of these CPUs would deliver broadly similar CPU-bound performance in this game. The Ryzen 5 2600's 75th percentile ranking among all CPUs reinforces that it sits in the upper-middle portion of the performance distribution, not at the top but comfortably above the median.

For the Intel Arc B580, the nearest rivals are a mixed group. The AMD Radeon RX 580 2048SP is essentially tied at 0.2% lower average score, while the NVIDIA GeForce RTX 2080 is 0.6% higher. Interestingly, the NVIDIA GeForce RTX 3080 shows a 0.7% lower average score than the Arc B580 in this database, and the NVIDIA P106-100 is 1% lower. The Arc B580's 68th percentile among all GPUs places it slightly below the CPU's relative standing, but the rival deltas are small enough that swapping between these cards would produce nearly identical frame rates in most scenarios. Users coming from an RTX 2080 or an RX 580 2048SP would see very similar performance characteristics, while those upgrading from an older card would notice a substantial jump.

How This Combo Ranks

In the database's combined rankings for Overpower, this CPU and GPU pairing lands at position 2815 out of 3713 tested combinations. That places it in the lower third of all tested combos, which is worth keeping in mind. The ranking reflects the fact that the Ryzen 5 2600, while still a capable processor, is from an older generation, and the Arc B580, despite being a modern GPU, does not catapult this pairing into the upper echelons. The data shows that most of the 3713 combos tested produce either higher average frame rates or better performance consistency. However, a rank in the 2800s does not mean the combo is unusable; it simply indicates that many other pairings are faster. The 898 combos ranked below this one are slower, so this is not a bottom-tier configuration either.

What this ranking means in practical terms is that the combination is neither a high-end showpiece nor a weakling. It occupies a middle-low position, and the measured frame rates confirm that it can handle the game at certain settings and resolutions. The rank is a single summary number; the real story is in the resolution-by-resolution breakdown, where the combo's strengths and limitations become clearer. For a game like Overpower, an action title, the rank suggests that competitive play at high refresh rates with maximum settings is not the intended use case, but smooth gameplay at more moderate settings is well within reach.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings produce an average of 125 FPS, which is a very high frame rate and leaves plenty of headroom for high-refresh-rate monitors. Medium settings average 76.8 FPS, High settings average 74.1 FPS, and even Ultra settings manage 62.5 FPS. The drop from Low to Ultra is roughly half, but every preset clears the 60 FPS threshold. This makes 1080p the most versatile resolution for this pairing, as all four settings are playable.

Moving to 2560x1440, the numbers tighten. Low settings still produce an excellent 111.2 FPS average, and Medium follows at 67 FPS. High settings average exactly 63 FPS, which just clears the playable threshold. Ultra settings, however, fall to 55.8 FPS, which is below the 60 FPS mark. The scaling from 1080p to 1440p shows a predictable penalty: the Ultra preset drops from 62.5 to 55.8 FPS, a reduction of 6.7 FPS, while Low drops from 125 to 111.2 FPS, a reduction of 13.8 FPS. The higher the settings, the smaller the absolute FPS loss from the resolution increase, which is typical of GPU-limited scenarios.

At 3840x2160, only Low settings remain playable, with an average of 93.6 FPS. Medium drops to 57.9 FPS, High to 55.1 FPS, and Ultra to 46.1 FPS. The gap between Low and Medium at 4K is 35.7 FPS, which is a steep cliff. This indicates that the GPU is heavily taxed at 4K with anything beyond the lowest settings. The 12 GB of GDDR6 memory on the Arc B580 is not the limiting factor here; the raw compute throughput is. The data does not include minimum or maximum frame times, so the analysis is based solely on averages, but the averages tell a clear story: 4K is only viable at Low settings for this combination.

The Verdict

Can this PC run Overpower? The answer depends entirely on the target resolution and settings. At 1920x1080, the verdict is an unequivocal yes. Every preset, from Low to Ultra, clears the 60 FPS playable threshold. Low averages 125 FPS, Medium 76.8 FPS, High 74.1 FPS, and Ultra 62.5 FPS. The Ultra preset is the best choice for visual quality, and it still stays above the threshold. For 1080p users, this combo is a solid match for the game.

At 2560x1440, the verdict is conditional. High, Low, and Medium settings are all playable, with High being the best playable option at 63 FPS average. Ultra falls short at 55.8 FPS. Players with 1440p monitors should stick to High or Medium for a smooth experience. The best settings designation for this resolution is High, since it offers the highest visual quality while remaining playable, but the margin above 60 FPS is slim at just 3 FPS. Medium at 67 FPS provides a slightly larger buffer.

At 3840x2160, only Low settings are playable, averaging 93.6 FPS. Medium, High, and Ultra all sit below the threshold at 57.9, 55.1, and 46.1 FPS respectively. For 4K users, the game is technically playable only at the lowest preset. The verdict for 4K is a qualified yes: it runs, but without the visual fidelity most 4K gamers would expect. If the goal is 60 FPS at High or Ultra in 4K, this combo is not sufficient. The data does not include minimum or maximum frame rates, so stutter and frame-time consistency cannot be assessed, but the averages are clear.

CPU and GPU Roles

The division of labor between the Ryzen 5 2600 and the Arc B580 changes with resolution and settings. At 1080p, the CPU plays a more significant role because the GPU is less burdened. The gap between Low and Ultra at 1080p is 62.5 FPS, which is a massive range. This wide spread indicates that the GPU is the primary limiter as settings increase, but the CPU must keep up with the high frame rates at Low settings. The Ryzen 5 2600, with its 6 cores and 12 threads, is sufficient to feed the GPU at 125 FPS in Low, but it is not so powerful that it would hold back the GPU in this scenario.

At 1440p, the GPU's role grows. The spread from Low to Ultra is 55.4 FPS, slightly narrower than at 1080p. The CPU is still capable of delivering over 100 FPS in Low, but the GPU becomes the bottleneck at Medium and above. The fact that High and Medium are close together, 63 vs 67 FPS, while Low jumps to 111.2 FPS, shows that the GPU is scaling with settings in a predictable way. The CPU is not the limiting factor at this resolution; it has enough headroom to support the GPU's output.

At 4K, the GPU dominates entirely. The spread from Low to Ultra is 47.5 FPS, and even the CPU's best effort cannot overcome the GPU's compute limits. Low at 93.6 FPS shows that the CPU can still push high frame rates when the GPU load is minimal, but Medium immediately drops to 57.9 FPS. This steep cliff between Low and Medium at 4K is a GPU limitation, not a CPU one. The Ryzen 5 2600 would perform similarly with a faster GPU at this resolution, as the GPU is clearly the constraint. Across all resolutions, the CPU's performance is adequate, but the Arc B580's capabilities define the playable envelope.

FAQ

Q: Can this combination run Overpower at 60 FPS on a 1080p monitor?

A: Yes. At 1920x1080, all four presets clear 60 FPS: Low averages 125 FPS, Medium 76.8 FPS, High 74.1 FPS, and Ultra 62.5 FPS.

Q: What is the best setting at 1440p for this combo?

A: High is the best playable setting at 2560x1440, with an average of 63 FPS. Low and Medium are also playable at 111.2 and 67 FPS, but Ultra drops to 55.8 FPS and is not playable.

Q: Is 4K gaming viable with the Ryzen 5 2600 and Arc B580?

A: Only at Low settings, which average 93.6 FPS at 3840x2160. Medium is 57.9 FPS, High is 55.1 FPS, and Ultra is 46.1 FPS, all below the 60 FPS threshold.

Q: How does the Arc B580 compare to the RTX 2080?

A: The Arc B580's average benchmark score is 0.6% lower than the NVIDIA GeForce RTX 2080, making them nearly identical in overall performance.

Q: How does the Ryzen 5 2600 compare to the Intel Core i9-11900H?

A: The Ryzen 5 2600 has an average benchmark score 0.5% higher than the Intel Core i9-11900H, so the two are effectively matched in CPU performance.

Q: What rank does this combo hold in the database for Overpower?

A: It ranks 2815 out of 3713 tested combinations, placing it in the lower third of tested combos but still above 898 other configurations.