Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Overpower
Action 2023

Overpower

63%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
110 FPS
Ultra 1080p Measured
53 FPS

1440p (2K / QHD)

Low 1440p Measured
98 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
84 FPS
Ultra 4K Measured
40 FPS
15.6ms Frame Time
23ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,513
Your CPU 21,484
Graphics Card
Required 27,382
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 49 52 84
1440p QHD 47 57 62 98
1080p Full HD 53 64 69 110

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 64
1920x1080 Low 110
1920x1080 Medium 69
1920x1080 Ultra 53
2560x1440 High 57
2560x1440 Low 98
2560x1440 Medium 62
2560x1440 Ultra 47
3840x2160 High 49
3840x2160 Low 84
3840x2160 Medium 52
3840x2160 Ultra 40

Performance Analysis: Overpower on Your System

Measured FPS Breakdown

The recorded data for Overpower with the AMD Ryzen 5 2600 and Intel Arc B570 covers three resolutions and four quality presets. The playable threshold in the database is 60 FPS, so the analysis below uses that as the reference point for smooth performance.

At 3840x2160, the results are limited. Low settings produce an average of 84 FPS, which is well above the 60 FPS threshold. Medium settings drop the average to 52 FPS, with a recorded minimum of 44 FPS and maximum of 60 FPS. High settings average 49 FPS, and Ultra settings average 40 FPS. Neither High nor Ultra reports min or max values in the database, only averages. The gap between Low and Medium is substantial: 32 FPS. The gap from Medium to High is only 3 FPS, while High to Ultra is 9 FPS. This suggests that the Medium preset is the point where the combination starts to lose headroom at 4K.

At 2560x1440, the picture improves considerably. Low settings average 98 FPS. Medium settings average 62 FPS, with a minimum of 52 FPS and maximum of 71 FPS. High settings average 57 FPS. Ultra settings average 47 FPS. The drop from Low to Medium is 36 FPS, which is the largest single-step decline at this resolution. Medium to High costs 5 FPS, and High to Ultra costs another 10 FPS. The Medium preset sits right at the edge of the 60 FPS target, while High falls just below it.

At 1920x1080, the combination performs best. Low settings average 110 FPS. Medium settings average 69 FPS, with a minimum of 59 FPS and maximum of 79 FPS. High settings average 64 FPS. Ultra settings average 53 FPS. The step from Low to Medium removes 41 FPS. Medium to High removes 5 FPS. High to Ultra removes 11 FPS. Notably, the Medium preset at 1080p has a minimum of 59 FPS, which is just 1 FPS below the 60 FPS threshold, but the average remains above it. High settings also maintain an average above 60 FPS.

Comparing the same preset across resolutions shows the scaling pattern. Low settings go from 110 FPS at 1080p to 98 FPS at 1440p to 84 FPS at 4K. Medium settings go from 69 FPS at 1080p to 62 FPS at 1440p to 52 FPS at 4K. High settings go from 64 FPS at 1080p to 57 FPS at 1440p to 49 FPS at 4K. Ultra settings go from 53 FPS at 1080p to 47 FPS at 1440p to 40 FPS at 4K. The resolution penalty is consistent across presets, roughly 10 to 15 FPS per step up in resolution.

CPU and GPU Roles

The benchmark data indicates that the Intel Arc B570 is the primary performance driver in this pairing, but the AMD Ryzen 5 2600 also contributes, particularly at lower resolutions. The CPU has 6 cores and 12 threads, with a base clock of 3.40 GHz and boost clock of 3.90 GHz. Its benchmark scores show modest single-thread performance (Geekbench single-core score of 1154, Passmark single-thread score of 2239) and stronger multi-thread performance (Geekbench multi-core score of 5648, Passmark multi-thread score of 13160). The CPU sits at the 75th percentile among all tested CPUs, meaning it outperforms roughly three-quarters of the database's CPU samples.

The GPU has 2304 shading units, 144 texture mapping units, and 80 render output units. Its FP32 compute is 11.52 TFLOPS, and its memory bandwidth is 380.0 GB/s across a 160-bit bus. The GPU sits at the 65th percentile among all tested GPUs. The average benchmark score for the GPU is 20556, while the CPU's average benchmark score is 21484. These numbers are close, but they measure different workloads.

The FPS scaling between resolutions reveals which component bottlenecks first. At 1080p Low, the combination produces 110 FPS. At 1440p Low, it produces 98 FPS. At 4K Low, it produces 84 FPS. The drop from 1080p to 1440p is 12 FPS, and from 1440p to 4K is 14 FPS. This gradual decline suggests that neither component is completely overwhelmed at Low settings; the workload scales relatively smoothly with pixel count.

At Medium settings, the pattern changes. 1080p Medium averages 69 FPS, 1440p Medium averages 62 FPS, and 4K Medium averages 52 FPS. The drop from 1080p to 1440p is only 7 FPS, but the drop from 1440p to 4K is 10 FPS. This steeper decline at higher resolution indicates that the GPU is becoming the limiting factor as the pixel load grows. The CPU has enough headroom to feed the GPU at 1080p and 1440p, but at 4K the GPU's rendering throughput is the constraint.

At High settings, the same trend holds. 1080p High averages 64 FPS, 1440p High averages 57 FPS, and 4K High averages 49 FPS. The drops are 7 FPS and 8 FPS respectively. At Ultra settings, 1080p averages 53 FPS, 1440p averages 47 FPS, and 4K averages 40 FPS. Drops of 6 FPS and 7 FPS. The consistent decline across all presets confirms that the GPU is the dominant factor for this game at every resolution above Low.

The CPU's role becomes more apparent at lower resolutions and lower presets. At 1080p Low, the combination reaches 110 FPS. This is close to the CPU's multi-thread capability limit, based on its Passmark multi-thread score of 13160. At 1080p Medium, the average drops to 69 FPS, which suggests the GPU is now handling more work per frame. The fact that 1080p Medium and 1080p High are only 5 FPS apart (69 vs 64) further indicates that the GPU is the bottleneck, not the CPU. If the CPU were the limiting factor, the gap between Medium and High would be larger.

For players using this combination, the data suggests that the Ryzen 5 2600 is sufficient to feed the Arc B570 at 1080p and 1440p, but neither component can push beyond Medium settings at those resolutions while maintaining 60 FPS. At 4K, the GPU is clearly the limiting factor, as even Low settings require the GPU to work hard to stay above 60 FPS.

Best Settings per Resolution

At 3840x2160, the only preset that stays at or above 60 FPS is Low. The average FPS at Low is 84, which provides 24 FPS of headroom above the threshold. Medium settings average 52 FPS, which is 8 FPS below the target. High averages 49 FPS, and Ultra averages 40 FPS. Therefore, the best settings at 4K are Low, with an average of 84 FPS.

At 2560x1440, two presets clear the 60 FPS threshold: Low and Medium. Low averages 98 FPS, and Medium averages 62 FPS. The database lists Medium as the best settings for this resolution, with an average of 62 FPS. This makes sense because Medium provides a higher visual quality than Low while still staying above the threshold. The minimum at Medium is 52 FPS, so there are brief dips below 60 FPS, but the average remains playable.

At 1920x1080, three presets clear the 60 FPS threshold: Low, Medium, and High. Low averages 110 FPS, Medium averages 69 FPS, and High averages 64 FPS. The database lists High as the best settings for this resolution, with an average of 64 FPS. This provides the highest visual quality among the playable options. Ultra settings average 53 FPS, which falls below the threshold.

The pattern across resolutions is clear: as resolution increases, the maximum playable preset drops. At 1080p, High is playable. At 1440p, Medium is the ceiling. At 4K, only Low is playable. The average FPS at the best settings for each resolution decreases from 64 at 1080p to 62 at 1440p to 84 at 4K. The 4K number is higher because Low settings are much less demanding than High or Medium.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 2600 provide context for how this CPU compares to other options. The Intel Core Ultra 5 228V has an average benchmark score of 21440, which is 0.2 percent higher than the Ryzen 5 2600's score of 21484. The Intel Core i9-11900H scores 21367, which is 0.5 percent lower. The Intel Xeon D-1746TER scores 21635, which is 0.7 percent higher. The AMD EPYC 9454 scores 21223, which is 1.2 percent lower. These deltas are all within 1.2 percent, meaning the Ryzen 5 2600 performs essentially identically to these four CPUs in aggregate benchmark scores. Any of these CPUs would likely produce similar frame rates in Overpower, assuming the GPU remains the same.

The nearest rivals for the Intel Arc B570 are similarly close. The NVIDIA GeForce RTX 3070 Mobile has an average score of 20534, which is 0.1 percent higher than the Arc B570's 20556. The Intel Arc A750 scores 20582, which is 0.1 percent lower. The NVIDIA Quadro M4000M scores 20480, which is 0.4 percent higher. The AMD Radeon R9 M390X scores 20662, which is 0.5 percent lower. All four rivals are within 0.5 percent of the Arc B570's score. In practical terms, swapping the Arc B570 for any of these GPUs would result in nearly identical frame rates in Overpower.

Combining these two sets of rivals, a system with any of the four rival CPUs paired with any of the four rival GPUs would perform within a rounding error of the Ryzen 5 2600 and Arc B570 combination. The frame rates measured for this combo would be representative of a broad cluster of hardware. For example, an Intel Core i9-11900H paired with an Intel Arc A750 would likely produce averages within a few FPS of the numbers recorded here. The same applies to an AMD EPYC 9454 with a NVIDIA Quadro M4000M, although the EPYC is a server part and less likely to appear in a gaming system.

The percentile rankings reinforce this similarity. The Ryzen 5 2600 sits at the 75th percentile among CPUs, while the Arc B570 sits at the 65th percentile among GPUs. Both are above the median, but neither is a top-tier part. The close rival scores indicate that this performance level is common across a wide range of hardware.

How This Combo Ranks

The combination of AMD Ryzen 5 2600 and Intel Arc B570 ranks 2987 out of 3713 tested combinations in the database for Overpower. This places it in the lower half of all tested combos, at approximately the 20th percentile from the top. In other words, roughly 80 percent of tested combinations perform better than this one in Overpower.

This ranking is consistent with the FPS data. At 1080p, the best playable preset is High at 64 FPS. Many faster combinations would achieve Ultra settings at 1080p with higher averages. At 1440p, the ceiling is Medium at 62 FPS. At 4K, only Low is playable. These limitations push the combo down the rankings.

The rank of 2987 out of 3713 means there are 726 combinations that perform worse. Those combinations would likely struggle to maintain 60 FPS even at 1080p on Low settings. The fact that this combo can reach 110 FPS at 1080p Low and 84 FPS at 4K Low shows that it has usable performance, but it is not competitive with mid-range or high-end systems for this game.

The percentile data for the individual components helps explain the ranking. The CPU at the 75th percentile is a solid mid-range part, but the GPU at the 65th percentile is slightly weaker relative to its peers. The combination of a mid-range CPU with a lower-mid-range GPU produces the observed frame rates and the resulting rank.

The Verdict

Based on the measured data, this computer can run Overpower, but only at specific resolutions and presets. The verdict by resolution is as follows.

At 3840x2160, the playable settings are limited to Low. The average FPS at Low is 84, which clears the 60 FPS threshold by a comfortable margin. Medium, High, and Ultra all fall below 60 FPS, with averages of 52, 49, and 40 FPS respectively. For 4K gaming, the best settings are Low, and the player should accept reduced visual quality to maintain smooth performance.

At 2560x1440, the playable settings are Low and Medium. Low averages 98 FPS, and Medium averages 62 FPS. The best settings for this resolution are Medium, which provides a balance of visual quality and performance. The minimum FPS at Medium is 52, so there may be occasional dips below 60 FPS, but the average stays above the threshold. High and Ultra are not playable, with averages of 57 and 47 FPS.

At 1920x1080, the playable settings are Low, Medium, and High. Low averages 110 FPS, Medium averages 69 FPS, and High averages 64 FPS. The best settings for this resolution are High, which offers the highest visual quality while maintaining an average above 60 FPS. Ultra is not playable, with an average of 53 FPS.

In summary, this system is viable for 1080p gaming at High settings, 1440p gaming at Medium settings, and 4K gaming at Low settings. It cannot handle Ultra settings at any resolution while maintaining 60 FPS. Players who prioritize frame rate over visual fidelity will find this combination adequate, but those who want maximum quality will need more powerful hardware.

FAQ

Q: Can this PC run Overpower at 4K resolution?

A: Yes, but only at Low settings. The average FPS at 3840x2160 Low is 84, which is above the 60 FPS threshold. Medium averages 52 FPS, High averages 49 FPS, and Ultra averages 40 FPS, all below the threshold.

Q: What is the best settings preset at 2560x1440?

A: The best settings at 1440p are Medium, with an average FPS of 62. Low also clears the threshold at 98 FPS, but Medium offers higher visual quality while staying above 60 FPS on average.

Q: Does the Intel Arc B570 outperform the NVIDIA GeForce RTX 3070 Mobile?

A: The two GPUs are nearly identical in aggregate benchmark scores. The Arc B570 scores 20556, while the RTX 3070 Mobile scores 20534, a difference of 0.1 percent. In Overpower, they would produce nearly the same frame rates.

Q: Is the AMD Ryzen 5 2600 a bottleneck for the Intel Arc B570 in this game?

A: The data suggests the GPU is the primary bottleneck at higher resolutions. At 1080p Low, the combo reaches 110 FPS, indicating the CPU can feed the GPU effectively. At 4K, the frame rates drop significantly, which points to the GPU as the limiting factor.

Q: What average FPS does this combo achieve at 1080p Ultra?

A: The average FPS at 1920x1080 Ultra is 53, which is below the 60 FPS playable threshold. Ultra is not listed among the playable settings at any resolution.

Q: How does this combination rank among all tested systems for Overpower?

A: It ranks 2987 out of 3713 tested combinations. This places it in the lower portion of the database, with roughly 80 percent of tested systems performing better for this game.