Instant compatibility check with FPS benchmarks and optimization tips
Overpower
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 31 | 49 |
| 1440p QHD | 28 | 34 | 36 | 58 |
| 1080p Full HD | 31 | 38 | 41 | 65 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Overpower on Your System
Measured FPS Breakdown
The recorded data for Overpower with this combination of AMD Ryzen 5 2600 and Intel Arc B370 covers three resolutions and four settings presets. Across the board, frame rates are modest, and only one configuration reaches the 60 FPS playable threshold.
At 1920x1080, the lowest preset delivers an average of 65 FPS, the only measured result above the playable threshold. The Medium preset drops to 41 FPS average, with a minimum of 34 FPS and a maximum of 47 FPS. High settings produce 38 FPS average. Ultra settings produce 31 FPS average. The spread from Low to Ultra at 1080p is 34 FPS, showing that each step up in quality costs a meaningful share of performance.
At 2560x1440, Low settings average 58 FPS, just below the 60 FPS threshold. Medium averages 36 FPS with a minimum of 31 FPS and a maximum of 42 FPS. High averages 34 FPS. Ultra averages 28 FPS. The gap between Low and Medium at this resolution is 22 FPS, the largest single-step drop in the dataset. From Low to Ultra, the total decline is 30 FPS.
At 3840x2160, Low settings average 49 FPS. Medium averages 31 FPS, with a minimum of 26 FPS and a maximum of 35 FPS. High averages 28 FPS. Ultra averages 24 FPS. The step from Low to Medium costs 18 FPS, and the step from Medium to High costs only 3 FPS. The step from High to Ultra costs another 4 FPS.
The data shows a consistent pattern: Low settings are the only preset that comes close to or exceeds 60 FPS, and only at 1920x1080 does it actually cross that line. Every other preset at every resolution falls short by a wide margin. The minimum and maximum values recorded only for Medium settings show that even the best-case frames at 1080p Medium (47 FPS) do not reach playable levels.
CPU and GPU Roles
This pairing consists of a six-core, twelve-thread AMD Ryzen 5 2600 processor and an Intel Arc B370 integrated-class GPU. The GPU has a very low benchmark percentile, ranking in the 5th percentile among all GPUs in the database. That places it far below typical discrete graphics solutions. The CPU, by contrast, sits in the 75th percentile among all CPUs, a much stronger relative position.
Benchmark results for the CPU show a multicore score of 5648 in Geekbench and a single-core score of 1154. PassMark multithread score is 13160, and single-thread score is 2239. The GPU's only recorded benchmark is a 3DMark Steel Nomad DX12 score of 1184.
The scaling between resolutions and presets indicates where the bottleneck sits. When moving from 1920x1080 Low to 2560x1440 Low, the average FPS drops from 65 to 58, a decline of about 11 percent. Moving from 2560x1440 Low to 3840x2160 Low drops the average from 58 to 49, another decline of about 16 percent. These are relatively modest losses for large resolution increases, which suggests the GPU is not being overwhelmed by pixel count alone.
The preset scaling tells a different story. At 1920x1080, the difference between Low and Medium is 24 FPS. At 2560x1440, that same step costs 22 FPS. At 3840x2160, it costs 18 FPS. The consistent and large penalty for moving from Low to Medium, regardless of resolution, points to the GPU being the primary constraint. Raising quality settings increases shading, texture, and lighting workloads, and this GPU cannot absorb that load at any resolution.
The CPU is likely capable of keeping up with the GPU's output at lower settings. The fact that Low presets achieve 49 FPS at 4K and 65 FPS at 1080p suggests the CPU is not holding the system back at those levels. If the CPU were the limiting factor, frame rates would cluster together regardless of resolution. Instead, they scale with resolution, which is the signature of a GPU-bound configuration.
At Medium and above, the GPU is clearly the limiting component. The 3DMark score of 1184 places this GPU in the same performance tier as much older integrated and low-end discrete parts. The recorded frame rates reflect that positioning. The CPU's relative strength, 75th percentile, is not enough to compensate for a GPU in the 5th percentile when quality settings rise.
How This Combo Ranks
The database places this combination at rank 3427 out of 3713 tested combinations for Overpower. That puts it in the bottom 8 percent of all tested systems. This is consistent with the GPU's low benchmark percentile and the measured frame rates.
The CPU's nearest rivals in the database include the Intel Core Ultra 5 228V with an average score of 21440, just 0.2 percent above the Ryzen 5 2600's 21484. The Intel Core i9-11900H scores 21367, 0.5 percent lower. The Intel Xeon D-1746TER scores 21635, 0.7 percent higher. The AMD EPYC 9454 scores 21223, 1.2 percent lower. These deltas are all small, meaning the Ryzen 5 2600 sits in a tightly packed cluster of processors with similar overall benchmark performance.
The GPU's nearest rivals are far less flattering. The ATI Mobility Radeon HD 5570 scores 1186, 0.2 percent above the Arc B370's 1184. The ATI Radeon HD 5770 scores 1190, 0.5 percent higher. The AMD Radeon HD 7650M scores 1192, 0.7 percent higher. The AMD FirePro M2000 scores 1168, 1.4 percent lower. These are all very old or low-end parts, and the Arc B370 sits among them.
The combination's rank of 3427 out of 3713 reflects both components, but the GPU's position in the 5th percentile is the dominant factor. Even with a CPU in the 75th percentile, the system cannot escape the GPU's limitations in a graphically demanding title like Overpower.
The Verdict
The question of whether this PC can run Overpower depends entirely on resolution and settings. The database uses a playable threshold of 60 FPS average.
At 3840x2160, no settings preset reaches 60 FPS. The best recorded result is 49 FPS on Low settings. Medium averages 31 FPS, High averages 28 FPS, and Ultra averages 24 FPS. This resolution is not playable at any quality level.
At 2560x1440, no settings preset reaches 60 FPS either. Low settings come closest at 58 FPS, but that is still below the threshold. Medium averages 36 FPS, High averages 34 FPS, and Ultra averages 28 FPS. This resolution is not playable at any quality level.
At 1920x1080, Low settings average 65 FPS, clearing the 60 FPS threshold with a small margin. Medium averages 41 FPS, High averages 38 FPS, and Ultra averages 31 FPS. Only 1080p Low is playable.
The verdict is straightforward. This system can run Overpower, but only at 1920x1080 with Low settings. Any attempt to raise the quality preset or increase the resolution will drop the frame rate below the playable threshold. The data shows no other playable configuration.
FAQ
Q: Can this PC run Overpower at 1920x1080?
A: Yes, but only on Low settings. The average frame rate at 1080p Low is 65 FPS, which is above the 60 FPS playable threshold. Medium settings drop to 41 FPS, which is not playable.
Q: What is the best playable settings preset for this system?
A: The only playable configuration in the recorded data is 1920x1080 with Low settings, averaging 65 FPS. No other resolution or preset combination reaches 60 FPS.
Q: Is 2560x1440 playable with this hardware?
A: No. The closest result is 58 FPS on Low settings at 2560x1440, which is below the 60 FPS threshold. Medium, High, and Ultra all average below 40 FPS.
Q: Can this system handle 3840x2160?
A: No. The best result at 3840x2160 is 49 FPS on Low settings. Medium averages 31 FPS, High averages 28 FPS, and Ultra averages 24 FPS. None of these meet the playable threshold.
Q: How does this CPU compare to nearby processors in the database?
A: The AMD Ryzen 5 2600 has an average benchmark score of 21484. The Intel Core Ultra 5 228V scores 21440, the Intel Core i9-11900H scores 21367, the Intel Xeon D-1746TER scores 21635, and the AMD EPYC 9454 scores 21223. All of these are within roughly 1 percent of each other.
Q: How does this GPU compare to nearby GPUs in the database?
A: The Intel Arc B370 has a 3DMark Steel Nomad DX12 score of 1184. The ATI Mobility Radeon HD 5570 scores 1186, the ATI Radeon HD 5770 scores 1190, the AMD Radeon HD 7650M scores 1192, and the AMD FirePro M2000 scores 1168. The Arc B370 sits in the middle of this group.
Best Settings per Resolution
At 3840x2160, no preset reaches 60 FPS. The best average is 49 FPS on Low settings, but that falls short of the playable threshold. There is no recommended preset for this resolution.
At 2560x1440, no preset reaches 60 FPS. The best average is 58 FPS on Low settings, again below the threshold. There is no recommended preset for this resolution.
At 1920x1080, Low settings average 65 FPS, which clears the 60 FPS threshold. This is the only playable configuration in the entire dataset. Low is the recommended preset at 1080p. Medium, High, and Ultra all fall below 60 FPS, with averages of 41 FPS, 38 FPS, and 31 FPS respectively.
The data shows a clear ceiling for this hardware. Users who want to play Overpower must accept 1080p Low or sacrifice smooth frame rates. The jump from Low to Medium costs roughly 24 FPS at 1080p, which is too large a penalty for the visual improvement gained.
Similar Performance Alternatives
The CPU's nearest rivals in the database are the Intel Core Ultra 5 228V, Intel Core i9-11900H, Intel Xeon D-1746TER, and AMD EPYC 9454. All four have average benchmark scores within 1.2 percent of the Ryzen 5 2600. A system built with any of these processors would behave similarly in terms of CPU-bound tasks, though the rest of the system configuration would still determine overall gaming performance.
The GPU's nearest rivals are the ATI Mobility Radeon HD 5570, ATI Radeon HD 5770, AMD Radeon HD 7650M, and AMD FirePro M2000. The Arc B370's score of 1184 is within 1.4 percent of all four. These GPUs represent the same performance tier, and systems using them would produce similar frame rates in Overpower.
For users considering alternative hardware, the data suggests that swapping the CPU for any of its nearest rivals would have minimal impact on frame rates, since the GPU is the limiting factor. Swapping the GPU for one of its nearest rivals would also produce similar results, since they all sit in the same performance band. The recorded FPS figures for this combination are representative of what these nearby parts would deliver.
The combination rank of 3427 out of 3713 places this system near the bottom of the database for Overpower. Users with hardware in this performance tier should expect to run the game at low settings and reduced resolutions, consistent with the measured results.