Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
290 FPS
Ultra 1080p Measured
142 FPS

1440p (2K / QHD)

Low 1440p Measured
191 FPS
Ultra 1440p Measured
93 FPS

4K (Ultra HD)

Low 4K Measured
106 FPS
Ultra 4K Measured
52 FPS
5.5ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 84,003
Graphics Card
Required 27,716
Your GPU 43,223

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 52 67 84 106
1440p QHD 93 120 151 191
1080p Full HD 142 183 229 290

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 183
1920x1080 Low 290
1920x1080 Medium 229
1920x1080 Ultra 142
2560x1440 High 120
2560x1440 Low 191
2560x1440 Medium 151
2560x1440 Ultra 93
3840x2160 High 67
3840x2160 Low 106
3840x2160 Medium 84
3840x2160 Ultra 52

Performance Analysis: Fivem on Your System

The Intel Core Ultra 9 290K Plus paired with the NVIDIA GeForce RTX 4070 SUPER is a high-end combination that delivers playable frame rates across all tested resolutions in Fivem, with the data showing a clear path to 60 FPS or higher at every preset. The benchmark results indicate that this system is not merely adequate but decisively overpowers the game’s requirements at 1080p and 1440p, while remaining comfortably playable at 4K with the right settings. This analysis breaks down the measured performance, component roles, and the best configuration for each resolution based solely on the provided data.

How This Combo Ranks

The combo ranks 606th out of 3707 tested combinations in Fivem, placing it in the top 16.4% of all systems evaluated. This is a strong showing for a multiplayer title that often depends on CPU throughput, though the ranking reflects the entire platform’s capability rather than just the GPU or CPU in isolation. The rank of 606 is notably high given the game’s age and its tendency to favor high single-threaded performance over sheer multi-core muscle.

Looking at the CPU side, the Intel Core Ultra 9 290K Plus sits in the 96th percentile of all CPUs, with an average benchmark score of 84003. Its nearest rival, the Intel Core Ultra 9 285K, scores 83807, a delta of just 0.2% — essentially a statistical tie. The AMD EPYC 4584PX trails by 1.1% with a score of 83090, while the AMD EPYC 9135 is 1.2% behind at 82980. On the other side, the AMD EPYC 7F72 leads this chip by 1.3% with a score of 85072. These margins are razor-thin, meaning the 290K Plus is at the very top of the desktop CPU hierarchy, but its advantage over the 285K is negligible in practice.

For the GPU, the RTX 4070 SUPER holds the 83rd percentile among all graphics cards, with an average benchmark score of 43223. Its closest competitor, the NVIDIA Quadro M6000 24 GB, scores 43262, a delta of -0.1% — meaning the Quadro is marginally ahead. The NVIDIA GeForce RTX 5050 Mobile also edges it out by 0.1% with a score of 43268, while the Quadro M6000 (non-24GB) is 0.2% ahead at 43301. The RTX 4090 Mobile leads by 1% with a score of 43667. These results show the 4070 SUPER is a solid mid-to-high-tier GPU, but it is not a flagship; it sits below the top-tier cards in raw compute.

The combination of a top-4% CPU and an 83rd-percentile GPU yields a 606th-place finish in Fivem’s combo ranking. This suggests the game is more sensitive to CPU performance than GPU, as the CPU’s high percentile compensates for the GPU’s lower standing. The rank of 606 out of 3707 means the vast majority of tested systems — roughly 3100 others — are slower, but a select group of 605 combos outperform this one, likely featuring even stronger GPUs or CPUs.

CPU and GPU Roles

The measured FPS data reveals a clear division of labor between the CPU and GPU in Fivem, with the CPU playing the dominant role at lower resolutions and the GPU becoming more influential as resolution increases. At 1920x1080, the system achieves an average of 290 FPS on Low settings, dropping to 229 FPS on Medium, 183 FPS on High, and 142 FPS on Ultra. The gap between Low and Ultra is 148 FPS, a 51% reduction, which indicates that even at 1080p, the GPU is being pushed harder as settings increase, but the CPU is still capable of feeding it enough frames to stay well above 60 FPS.

Moving to 2560x1440, the average FPS on Low is 191, Medium is 151, High is 120, and Ultra is 93. The drop from 1080p Low to 1440p Low is 99 FPS (from 290 to 191), which is a 34% reduction. This scaling shows that resolution has a significant impact on frame rate, but the CPU is no longer the primary bottleneck — the GPU is now doing more work per frame. The transition from 1440p to 3840x2160 further confirms this: Low averages 106 FPS, Medium 84 FPS, High 67 FPS, and Ultra 52 FPS. The drop from 1440p Low to 4K Low is 85 FPS (from 191 to 106), a 44% reduction, which is the largest resolution-based penalty in the data.

The pattern is consistent: as resolution increases, the GPU becomes the limiting factor, while the CPU’s role diminishes. At 1080p, the CPU’s high single-thread performance (as evidenced by its Cinebench R23 single-core score of 7303 and PassMark single-thread score of 4823) ensures that even Ultra settings stay above 140 FPS. At 4K, the GPU’s 12 GB GDDR6X memory and 504.2 GB/s bandwidth are more critical, and the system falls below 60 FPS only on Ultra (52 FPS). The data indicates that the CPU is never a bottleneck in this game, even at 1080p Low, where 290 FPS is achieved; instead, the GPU’s capabilities dictate the ceiling at higher resolutions and settings.

The settings scaling also reveals that the GPU is the primary driver of performance changes. At 4K, going from Low to Ultra costs 54 FPS (from 106 to 52), a 51% drop. At 1440p, the same settings change costs 98 FPS (from 191 to 93), a 51% drop. At 1080p, the cost is 148 FPS (from 290 to 142), also a 51% drop. This consistent 51% reduction across all resolutions when moving from Low to Ultra suggests that the GPU’s workload scales uniformly with settings, and the CPU is not introducing any additional variance.

FAQ

Q: Can this system run Fivem at 60 FPS on Ultra settings at 1080p?

A: Yes. At 1920x1080 with Ultra settings, the average FPS is 142, which is more than double the playable threshold of 60 FPS. The minimum FPS is not provided for this preset, but the average is so high that dips below 60 are highly unlikely.

Q: What is the best settings preset for 4K gaming?

A: The highest preset that stays at or above 60 FPS at 3840x2160 is High, which averages 67 FPS. Medium also qualifies at 84 FPS, and Low at 106 FPS, but Ultra falls short with an average of 52 FPS.

Q: How does the CPU compare to its nearest rival in synthetic benchmarks?

A: The Intel Core Ultra 9 290K Plus has an average benchmark score of 84003, which is 0.2% higher than the Intel Core Ultra 9 285K’s score of 83807. It is also 1.1% ahead of the AMD EPYC 4584PX and 1.2% ahead of the AMD EPYC 9135, but 1.3% behind the AMD EPYC 7F72.

Q: Which component is more important for Fivem performance?

A: The data shows the CPU is the dominant factor at lower resolutions. At 1080p Low, the system hits 290 FPS, which is likely CPU-limited, while the GPU becomes the bottleneck at 4K, where Ultra drops to 52 FPS. The CPU’s 96th percentile ranking and the GPU’s 83rd percentile ranking support this interpretation.

Q: Is the RTX 4070 SUPER a high-tier GPU?

A: It is in the 83rd percentile of all GPUs, with an average benchmark score of 43223. It is roughly on par with the Quadro M6000 24 GB, which scores 43262, and just 1% behind the RTX 4090 Mobile at 43667. This places it in the upper-mid tier, not the absolute top.

Q: What frame rate can I expect at 1440p on Medium settings?

A: At 2560x1440 with Medium settings, the average FPS is 151, with a minimum of 128 and a maximum of 173. This is well above the 60 FPS threshold and indicates a smooth experience.

The Verdict

The answer is a definitive yes — this PC can run Fivem, and it does so with substantial headroom above the 60 FPS playable threshold. The verdict by resolution shows that at 3840x2160, the playable settings are High, Low, and Medium, with the best setting being High at an average of 67 FPS. Ultra is the only preset that fails to clear 60 FPS, averaging just 52 FPS. At 2560x1440, all four presets are playable, and the best is Ultra at 93 FPS. At 1920x1080, every preset is playable, with Ultra achieving 142 FPS as the best.

In practical terms, a player can run Fivem at 4K High with a comfortable margin above 60 FPS, and at 1440p or 1080p, they can max out the settings without concern. The system’s weakest point is 4K Ultra, which dips below the threshold, but this is an extreme setting that even many high-end systems struggle with. For most users, the recommended configuration is 1440p Ultra or 1080p Ultra, where the frame rates are so high that they exceed typical monitor refresh rates.

Measured FPS Breakdown

At 3840x2160, the measured averages are as follows: Low settings produce 106 FPS on average, Medium produces 84 FPS with a minimum of 71 and a maximum of 96, High produces 67 FPS, and Ultra produces 52 FPS. The Medium preset is the only one at this resolution with min/max data, showing a 25 FPS spread between the 71 FPS minimum and 96 FPS maximum.

At 2560x1440, the averages are: Low at 191 FPS, Medium at 151 FPS (min 128, max 173), High at 120 FPS, and Ultra at 93 FPS. The Medium preset again has the only min/max data, with a 45 FPS range from 128 to 173.

At 1920x1080, the system reaches its peak: Low at 290 FPS, Medium at 229 FPS (min 194, max 263), High at 183 FPS, and Ultra at 142 FPS. The Medium preset shows a 69 FPS range, from 194 to 263, which is the widest spread recorded in the entire dataset.

The data lacks min/max values for most presets, so the analysis relies on averages, but the provided min/max figures for Medium at each resolution show that the system maintains consistent frame times, with no catastrophic dips. The 4K Medium minimum of 71 FPS is still above the 60 FPS threshold, which bodes well for overall stability.

Best Settings per Resolution

At 3840x2160, the best setting is High, which averages 67 FPS. This is the most demanding preset that stays at or above the 60 FPS threshold, and it offers a 15 FPS advantage over Medium’s 84 FPS in terms of visual quality, while still maintaining playability. Ultra at 52 FPS is not recommended, as it falls below the threshold.

At 2560x1440, the best setting is Ultra, averaging 93 FPS. This is the highest preset available, and it comfortably exceeds the 60 FPS requirement by 33 FPS. Even the most demanding settings at this resolution do not challenge the system significantly.

At 1920x1080, the best setting is also Ultra, with an average of 142 FPS. This is 82 FPS above the 60 FPS threshold, leaving enormous headroom for any potential frame drops in multiplayer scenarios. The system is so powerful at 1080p that it is effectively never CPU- or GPU-limited in a way that would harm playability.

In summary, the recommended configurations are 4K High, 1440p Ultra, and 1080p Ultra. The 1440p and 1080p options both exceed 90 FPS on Ultra, which is ideal for high-refresh-rate monitors, while 4K High offers a solid 67 FPS for those prioritizing resolution over settings.