Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 66 | 85 | 106 | 135 |
| 1440p QHD | 119 | 153 | 191 | 242 |
| 1080p Full HD | 180 | 232 | 290 | 368 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 4090 is an exceptionally high-end combination for Fivem, placing in the 97th percentile of all tested combos in this game. The benchmark data, measured across three resolutions and four quality presets, shows this system never drops below 60 FPS, with even the most demanding 4K Ultra preset maintaining an average of 66 FPS. This analysis breaks down the measured performance data to determine optimal settings, component roles, and how this specific hardware stack compares to alternatives.
FAQ
Q: What is the highest graphical preset that maintains an average of 60 FPS at 3840x2160?
A: The Ultra preset at 4K delivers an average of 66 FPS, which is above the 60 FPS playable threshold. This makes Ultra the highest playable setting at this resolution, though High (85 FPS) and Medium (106 FPS) offer progressively higher headroom.
Q: How does the system perform at 2560x1440 with Ultra settings?
A: At 1440p Ultra, the combo achieves an average of 119 FPS, which is nearly double the 60 FPS threshold. The data shows this is the best settings choice at this resolution, as the average FPS remains well above playable levels.
Q: What is the maximum average FPS recorded in the entire benchmark set?
A: The highest average FPS comes from the 1920x1080 Low preset, reaching 368 FPS. Even the most demanding 1080p preset (Ultra) maintains a substantial 180 FPS average.
Q: Are there any settings at any resolution where the system falls below 60 FPS?
A: No. The lowest recorded average FPS across all 12 tested configurations is 66 FPS at 4K Ultra. The minimum FPS data point available, 90 FPS at 4K Medium, also stays well above the threshold.
Q: How does the Ultra 7 265K compare to its closest CPU rivals in synthetic benchmarks?
A: The CPU's average benchmark score of 70,879 is essentially tied with the Intel Xeon 6511P (71,051, -0.2% delta) and the Intel Xeon Platinum 8270 (71,370, -0.7% delta). It sits 1% ahead of the Intel Core i7-14700KF (70,163) and 1.3% ahead of the AMD Ryzen 7 9700F (69,996).
Q: What is the GPU's percentile ranking among all tested graphics cards?
A: The RTX 4090 ranks in the 88th percentile of all GPUs, with an average benchmark score of 60,347. Its closest rival, the Intel Arc Pro A60, scores 60,326 (0% delta), indicating nearly identical synthetic performance.
Best Settings per Resolution
At 3840x2160, the most demanding preset that remains at or above 60 FPS is Ultra, which produces an average of 66 FPS. The data shows a clear progression from Low (135 FPS) to Medium (106 FPS) to High (85 FPS) and finally Ultra (66 FPS), with each step reducing average performance by roughly 20-29 FPS. The 4K Ultra setting is playable but leaves minimal headroom, as the average is just 6 FPS above the threshold.
For 2560x1440, the Ultra preset is again the best choice, delivering an average of 119 FPS. This represents a significant improvement over 4K Ultra, with the 1440p configuration providing 53 more FPS on average. The scaling from Medium (191 FPS) to High (153 FPS) to Ultra (119 FPS) shows a consistent drop of about 35-38 FPS per tier, but even the lowest of these remains far above the playability threshold.
At 1920x1080, the Ultra preset achieves an average of 180 FPS, which is three times the 60 FPS threshold. The gap between Medium (290 FPS) and High (232 FPS) is 58 FPS, while the drop from High to Ultra is 52 FPS. This resolution offers such substantial performance that even the heaviest settings leave enormous headroom for competitive play or high refresh-rate displays.
CPU and GPU Roles
The benchmark data reveals how the balance between the Intel Core Ultra 7 265K and the RTX 4090 shifts across resolutions. At 1920x1080, the CPU's role becomes more prominent, as the GPU can render frames quickly enough that processor throughput limits overall output. The jump from Low (368 FPS) to Ultra (180 FPS) at 1080p demonstrates how graphical settings still scale heavily, but the extremely high frame rates suggest the CPU's 20 cores and 20 threads are keeping pace with the GPU's output.
Moving to 2560x1440, the GPU begins to take on more responsibility, as the frame rates drop across all presets compared to 1080p. The average FPS at 1440p Ultra (119 FPS) is 34% lower than 1080p Ultra (180 FPS), indicating that the increased pixel count is straining the GPU. However, the RTX 4090's 24 GB of GDDR6X memory and 1.01 TB/s bandwidth handle the higher resolution load efficiently, as the system still maintains over 100 FPS on all presets except the lowest tested.
At 3840x2160, the GPU becomes the dominant bottleneck. The average FPS at 4K Ultra (66 FPS) is 45% lower than 1440p Ultra (119 FPS), a substantial drop that points to the rendering workload rather than CPU limitations. The RTX 4090's 82.58 TFLOPS of FP32 performance is being fully utilized at this resolution, while the CPU's workload likely decreases as the GPU takes longer to complete each frame. The 4K Medium preset shows a minimum FPS of 90, suggesting that even in demanding scenes, the GPU maintains consistent frame delivery without CPU-induced stutters.
How This Combo Ranks
This specific combination of the Intel Core Ultra 7 265K and NVIDIA GeForce RTX 4090 ranks 97th out of 3,707 tested combos in Fivem, placing it in the top 2.6% of all systems benchmarked. This ranking reflects the synergy between a CPU that scores in the 94th percentile among all processors and a GPU in the 88th percentile among all graphics cards.
The high combo rank is supported by the measured FPS data, which shows no configuration falling below 66 FPS average. The system's ability to push 180 FPS at 1080p Ultra and 119 FPS at 1440p Ultra indicates that it outperforms the vast majority of tested hardware in this multiplayer title. The rank of 97 means only 96 other combinations of CPU and GPU in the database achieve higher performance in Fivem, despite this already being a top-tier pairing.
Similar Performance Alternatives
For the CPU, the nearest rivals in synthetic benchmarks provide context for what other processors would behave similarly. The Intel Xeon 6511P scores 71,051 (0.2% higher than the 265K), making it the closest match. The Intel Xeon Platinum 8270 is 0.7% faster at 71,370, while the Intel Core i7-14700KF is 1% slower at 70,163. The AMD Ryzen 7 9700F trails by 1.3% with a score of 69,996. In real-world Fivem performance, these CPUs would produce nearly identical frame rates when paired with the same GPU, as the differences are within 1.3 percentage points.
On the GPU side, the RTX 4090's closest rival is the Intel Arc Pro A60, which scores 60,326 (0% delta), indicating essentially identical synthetic performance. The AMD Radeon Pro Vega 48 scores 60,140 (0.3% lower), and the AMD Radeon Pro W6600M is 2.5% faster at 61,896. The AMD Radeon PRO V710 trails by 2.9% at 58,657. These GPUs would deliver comparable FPS in Fivem, though the RTX 4090's specific architecture and 24 GB memory capacity may give it advantages in certain scenes that these synthetic scores don't fully capture.
The Verdict
This PC can absolutely run Fivem at the highest settings across all tested resolutions. The verdict by resolution confirms that 3840x2160 Ultra is playable with an average of 66 FPS, 2560x1440 Ultra is playable with an average of 119 FPS, and 1920x1080 Ultra is playable with an average of 180 FPS. Every single preset tested—from 4K Ultra to 1080p Low—exceeds the 60 FPS playable threshold.
The strongest performance comes at 1080p, where the system maintains triple-digit frame rates even on the most demanding preset. At 1440p, the Ultra setting provides a smooth experience with enough headroom for dips in busy multiplayer scenarios. The 4K Ultra setting is the only configuration where average FPS approaches the threshold, but at 66 FPS it still clears the requirement by 10%. For players targeting 60 FPS as the baseline, this combo delivers that performance at maximum settings in every resolution, with the ability to push much higher frame rates by selecting High or Medium presets at lower resolutions.
Measured FPS Breakdown
3840x2160 (4K):
- Low: 135 FPS average
- Medium: 106 FPS average, 90 FPS minimum, 122 FPS maximum
- High: 85 FPS average
- Ultra: 66 FPS average
2560x1440 (1440p):
- Low: 242 FPS average
- Medium: 191 FPS average, 163 FPS minimum, 220 FPS maximum
- High: 153 FPS average
- Ultra: 119 FPS average
1920x1080 (1080p):
- Low: 368 FPS average
- Medium: 290 FPS average, 247 FPS minimum, 334 FPS maximum
- High: 232 FPS average
- Ultra: 180 FPS average
The data shows a consistent pattern: each step up in resolution reduces performance by roughly 35-45% across equivalent presets, and each step up in quality settings reduces performance by approximately 20-30% within a given resolution. The minimum FPS values recorded only for Medium presets indicate that this setting level provides the most stable frame delivery, with the 4K Medium configuration showing a 90 FPS minimum—still well above the playable threshold.