Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 72 | 93 | 116 | 147 |
| 1440p QHD | 130 | 167 | 209 | 265 |
| 1080p Full HD | 197 | 254 | 317 | 402 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The Intel Core Ultra 7 265 paired with the NVIDIA GeForce RTX 5090 D is a top-tier combination for Fivem, ranking first out of 3,707 tested combos. The data shows that this system delivers exceptionally high frame rates across all tested resolutions, with the only limitation being the game's own engine rather than hardware capability. This analysis breaks down the measured performance, the balance between CPU and GPU load, and what the numbers mean for practical play.
Best Settings per Resolution
The data indicates that this configuration can run Fivem at the maximum "Ultra" preset while maintaining frame rates well above the 60 FPS playable threshold at every resolution tested. At 1920x1080, the system achieves an average of 197 FPS on Ultra settings. Moving up to 2560x1440, the average drops to 130 FPS on Ultra, which still leaves considerable headroom. At 3840x2160, the Ultra preset yields an average of 72 FPS, which clears the 60 FPS bar but with less margin than at lower resolutions.
For gamers prioritizing maximum visual fidelity, Ultra is the recommended setting at all three resolutions. The frame rate at 4K Ultra is 72 FPS, which is 12 FPS above the playable threshold. At 1440p Ultra, the 130 FPS average provides a smooth experience for high-refresh-rate displays. At 1080p Ultra, the 197 FPS average is more than triple the playable threshold. The measured data includes specific minimum and maximum values only for Medium settings: at 3840x2160 Medium shows a minimum of 99 FPS and maximum of 133 FPS, at 2560x1440 Medium shows 178 to 240 FPS, and at 1920x1080 Medium shows 270 to 365 FPS. These ranges suggest that even the lowest recorded frames at Medium settings far exceed the 60 FPS requirement. Since all four settings presets (Low, Medium, High, Ultra) are listed as playable at every resolution, the choice comes down to whether the user prefers maximum visuals or maximum frame rates.
CPU and GPU Roles
The benchmark results show that Fivem scales significantly with resolution, which indicates a strong GPU dependency. At Low settings, the average frame rate drops from 402 FPS at 1920x1080 to 265 FPS at 2560x1440, and then to 147 FPS at 3840x2160. This represents a reduction of approximately 34% when moving from 1080p to 1440p, and a further reduction of about 45% when moving from 1440p to 4K. The pattern is consistent across all settings presets, with the gap between resolutions narrowing as settings increase. At Ultra settings, the frame rate drops from 197 FPS at 1080p to 130 FPS at 1440p (a 34% reduction), and then to 72 FPS at 4K (a 45% reduction from 1440p).
The CPU's role becomes more apparent when comparing settings at the same resolution. At 1920x1080, switching from Low to Ultra reduces the average frame rate from 402 FPS to 197 FPS, a 51% drop. This suggests that at lower resolutions, the GPU is less burdened and the CPU can push more frames, but the Ultra preset increases GPU load substantially. The Intel Core Ultra 7 265 has 20 cores and 20 threads with a boost clock of 5.30 GHz, and its benchmark scores place it in the 93rd percentile of all CPUs. The data shows that even at 1080p Low, the system achieves 402 FPS, which is likely near the engine's practical limit. At 4K Ultra, the GPU becomes the primary constraint, as the RTX 5090 D's 104.8 TFLOPS of FP32 performance and 1.79 TB/s memory bandwidth handle the increased rendering load. The RTX 5090 D ranks in the 92nd percentile of all GPUs. The scaling pattern indicates that Fivem is more GPU-bound at higher resolutions, while the CPU's strong single-thread performance (5,960 in Cinebench R23 single-core) ensures it does not bottleneck even at 1080p.
Measured FPS Breakdown
At 1920x1080, the full range of settings shows the system's headroom. Low settings produce an average of 402 FPS. Medium settings average 317 FPS, with a minimum of 270 FPS and a maximum of 365 FPS. High settings average 254 FPS. Ultra settings average 197 FPS. All of these values are far above the 60 FPS playable threshold, and even the minimum recorded frame rate at Medium (270 FPS) is more than four times the threshold.
At 2560x1440, the performance remains exceptionally high. Low settings average 265 FPS. Medium settings average 209 FPS, with a minimum of 178 FPS and a maximum of 240 FPS. High settings average 167 FPS. Ultra settings average 130 FPS. The minimum at Medium (178 FPS) still exceeds the 60 FPS threshold by nearly triple. The progression from Low to Ultra at this resolution shows a 51% reduction in average frame rate, consistent with the increased GPU load from higher quality textures and effects.
At 3840x2160, the system begins to show more meaningful differences between presets. Low settings average 147 FPS. Medium settings average 116 FPS, with a minimum of 99 FPS and a maximum of 133 FPS. High settings average 93 FPS. Ultra settings average 72 FPS. Even at the most demanding preset, the average frame rate stays above the 60 FPS playable threshold. The minimum at Medium (99 FPS) is still 39 FPS above the threshold, indicating that the system does not dip below playable levels. The data for High and Ultra at 4K does not include minimum or maximum values, but the averages suggest consistent performance. The gap between Low and Ultra at 4K is 75 FPS, which is a 51% reduction, matching the pattern seen at other resolutions. This consistency suggests that the GPU scaling is predictable across the resolution range.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core Ultra 7 265 sits close to several AMD EPYC server processors in average benchmark score. The AMD EPYC 4464P scores 64,823, which is 0.3% lower than the Core Ultra 7 265's 64,640 average. The Intel Core Ultra 7 265F scores 64,438, which is 0.3% higher than the non-F variant. The AMD EPYC 7343 scores 64,202, which is 0.7% higher. The AMD EPYC 9124 scores 65,104, which is 0.7% lower. These delta percentages are minimal, meaning a user with any of these CPUs would experience nearly identical CPU-bound performance in Fivem. The EPYC parts are server-oriented, but their similar scores indicate that the Core Ultra 7 265's 20-core, 20-thread configuration with 30 MB of L3 cache provides comparable computational throughput.
For the GPU, the nearest rivals show a wider spread but still within a narrow band. The AMD Radeon RX 6650M XT scores 76,904, which is 1.1% higher than the RTX 5090 D's 77,712 average. The AMD Radeon RX 6850M XT scores 78,940, which is 1.6% lower. The NVIDIA Tesla P100 PCIe 12 GB scores 79,396, which is 2.1% lower. The NVIDIA Tesla P100 PCIe 16 GB scores 79,605, which is 2.4% lower. These are all mobile or data-center parts, not direct desktop equivalents, but the benchmark data suggests that in terms of raw compute, the RTX 5090 D performs within a few percentage points of these alternatives. In Fivem specifically, the RTX 5090 D's 32 GB of GDDR7 memory and 512-bit bus provide ample bandwidth for 4K textures, and the 1.1% delta to the RX 6650M XT would translate to a negligible difference in frame rates. Users considering these alternatives should expect similar measured FPS values, though the desktop RTX 5090 D offers the advantage of being an active production part with current driver support.
FAQ
Q: Can this system run Fivem at 4K Ultra settings?
A: Yes. The measured data shows an average of 72 FPS at 3840x2160 on Ultra settings, which exceeds the 60 FPS playable threshold. All four settings presets (Low, Medium, High, Ultra) are listed as playable at this resolution.
Q: What is the highest frame rate this setup can achieve in Fivem?
A: The highest measured average is 402 FPS at 1920x1080 on Low settings. The data shows that at 1440p Low, the average is 265 FPS, and at 4K Low, it is 147 FPS.
Q: How much performance is lost when moving from 1080p to 4K?
A: At Ultra settings, the frame rate drops from 197 FPS at 1920x1080 to 130 FPS at 2560x1440, and then to 72 FPS at 3840x2160. This represents a 45% reduction from 1440p to 4K and a 34% reduction from 1080p to 1440p.
Q: Does this system ever drop below 60 FPS in Fivem?
A: The available minimum values are for Medium settings only. At 3840x2160 Medium, the minimum is 99 FPS. At 2560x1440 Medium, the minimum is 178 FPS. At 1920x1080 Medium, the minimum is 270 FPS. All recorded minimums are well above 60 FPS.
Q: How does the Core Ultra 7 265 compare to its closest CPU rivals?
A: The AMD EPYC 4464P scores 0.3% lower, the Intel Core Ultra 7 265F scores 0.3% higher, the AMD EPYC 7343 scores 0.7% higher, and the AMD EPYC 9124 scores 0.7% lower in average benchmark score. These differences are within 1% of the Core Ultra 7 265's 64,640 average.
Q: Is the RTX 5090 D significantly faster than its nearest GPU rivals?
A: The nearest rival, the AMD Radeon RX 6650M XT, scores 1.1% higher in average benchmark score. The other rivals score between 1.6% and 2.4% lower. These deltas are small enough that in-game FPS would be nearly identical for Fivem.
The Verdict
The verdict data is unambiguous: this system can run Fivem at playable frame rates across every resolution and setting combination tested. At 3840x2160, the best playable setting is Ultra with an average of 72 FPS, which clears the 60 FPS threshold. At 2560x1440, Ultra settings deliver 130 FPS, more than double the threshold. At 1920x1080, Ultra settings deliver 197 FPS, more than triple the threshold. All four settings presets are listed as playable at all three resolutions, meaning even the most demanding configuration stays above 60 FPS.
The RTX 5090 D's 32 GB of GDDR7 memory and 104.8 TFLOPS of FP32 compute are more than sufficient for Fivem's multiplayer environments, which often feature dense player populations and custom assets. The Core Ultra 7 265's 20 cores and 5.30 GHz boost clock ensure that CPU-bound scenarios, such as large player counts or complex server-side scripts, do not become a bottleneck. The combination ranks first out of 3,707 tested combos, and the measured data confirms this position. Users with high-refresh-rate monitors at 1080p or 1440p can fully utilize their displays, while 4K users can run max settings with a comfortable margin above the playable threshold. This is a definitive "yes" for running Fivem at maximum quality.