Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
281 FPS
Ultra 1080p Measured
135 FPS

1440p (2K / QHD)

Low 1440p Measured
184 FPS
Ultra 1440p Measured
93 FPS

4K (Ultra HD)

Low 4K Measured
101 FPS
Ultra 4K Measured
53 FPS
5.7ms Frame Time
9ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 70,163
Graphics Card
Required 27,716
Your GPU 40,377

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 53 62 84 101
1440p QHD 93 117 146 184
1080p Full HD 135 174 222 281

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 174
1920x1080 Low 281
1920x1080 Medium 222
1920x1080 Ultra 135
2560x1440 High 117
2560x1440 Low 184
2560x1440 Medium 146
2560x1440 Ultra 93
3840x2160 High 62
3840x2160 Low 101
3840x2160 Medium 84
3840x2160 Ultra 53

Performance Analysis: Fivem on Your System

The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 5070 is a high-end combination that delivers strong performance in Fivem across all tested resolutions. Benchmark data shows that this system is capable of exceeding the 60 FPS playability threshold in most settings, with its primary limitation appearing only at 4K with the Ultra preset. The following analysis breaks down the measured performance, compares it to nearby hardware, and provides clear guidance on optimal settings.

Similar Performance Alternatives

Based on aggregate benchmark scores, the Intel Core i7-14700KF sits within a tight cluster of competing CPUs. The nearest rival is the AMD Ryzen 7 9700F, which scores a 0.2% higher average benchmark score (69996 vs. 70163). The AMD Ryzen 9 7940HX is also extremely close, trailing by just 0.4% with an average score of 69875, while the AMD Ryzen 9 7950X is 0.9% behind at 69515. On the other side, the Intel Core Ultra 7 265K leads this group by 1% (70879), making it the strongest performer in this immediate comparison set. In practical terms for Fivem, these differences are negligible; all four alternatives would deliver nearly identical frame rates in CPU-bound scenarios.

For the GPU, the NVIDIA GeForce RTX 5070 shows a more varied comparison landscape. The AMD Radeon Pro 580 is essentially a statistical tie, with an average score of 40318 versus the RTX 5070's 40377 — a delta of just 0.1%. The AMD Radeon Pro WX 7100 comes in 0.8% lower (40063), while the AMD Radeon Pro 5300 is 1.2% higher (40870). The NVIDIA RTX A500 Mobile trails by 2% with a score of 39568. It is important to note that these rival GPUs are primarily professional or mobile workstation parts, not direct consumer gaming equivalents. However, based purely on benchmark scores, a user moving from any of these alternatives to the RTX 5070 would see broadly similar raw compute performance, though gaming-specific features and driver optimizations may differ.

CPU and GPU Roles

The data reveals how the balance between CPU and GPU shifts across resolutions in Fivem. At 1920x1080, the system is clearly more CPU-bound, as evidenced by the massive frame rate headroom: the Low preset achieves 281.4 FPS, and even Ultra reaches 135.1 FPS. These high frame rates indicate that the RTX 5070 has ample capacity, and the limiting factor is likely the CPU's ability to feed the GPU with draw calls and game logic.

Moving to 2560x1440, the GPU begins to take on a more significant role. The frame rates drop noticeably compared to 1080p — Ultra falls from 135.1 to 92.7 FPS, and Low goes from 281.4 to 184 FPS. This scaling pattern (roughly 30-35% reduction in FPS for a 78% increase in pixel count) suggests that while the GPU is becoming more stressed, the i7-14700KF still provides sufficient throughput to maintain high performance.

At 3840x2160, the GPU becomes the dominant bottleneck. The Ultra preset drops to 53.2 FPS, falling below the 60 FPS threshold, while High manages 61.9 FPS. The gap between Low (101.1 FPS) and Ultra (53.2 FPS) at this resolution is nearly 2x, which is much wider than the 1080p gap (281.4 vs. 135.1, about 2.1x but at much higher absolute levels). This indicates that at 4K, the RTX 5070's 12 GB VRAM and 672.0 GB/s bandwidth are the primary constraints, and the CPU's 20 cores and 28 threads are no longer the limiting factor.

Measured FPS Breakdown

At 1920x1080, the system delivers exceptional performance across all presets. The Low setting produces an average of 281.4 FPS, which drops to 221.9 FPS at Medium and 174.4 FPS at High. The most demanding Ultra preset still maintains a very comfortable 135.1 FPS average. These numbers indicate that at 1080p, the combination is far beyond the playability threshold, with even the heaviest settings leaving massive headroom for high-refresh-rate monitors.

At 2560x1440, performance remains strong but shows the expected scaling cost. Low averages 184 FPS, Medium 145.6 FPS, and High 116.6 FPS. Ultra drops to 92.7 FPS, which is still well above the 60 FPS threshold and provides a smooth experience for most users. The progression from Low to Ultra at this resolution represents a roughly 50% reduction in frame rate, consistent with the increasing pixel workload.

At 3840x2160, the system begins to show its limits. Low still delivers a solid 101.1 FPS, and Medium manages 83.5 FPS. High just clears the 60 FPS bar with 61.9 FPS, while Ultra falls short at 53.2 FPS. This is the only resolution where any preset fails to meet the playability threshold. The 4K results highlight that while the RTX 5070 is capable at this resolution, the Ultra preset's demands exceed what the card can deliver in Fivem.

The Verdict

This PC can run Fivem successfully at all three tested resolutions, but with a caveat at 4K. At 1920x1080, every preset from Low to Ultra clears the 60 FPS threshold, with the lowest result being 135.1 FPS at Ultra. At 2560x1440, all four presets also remain playable, with Ultra delivering 92.7 FPS. At 3840x2160, three of the four presets (Low, Medium, High) exceed 60 FPS, but Ultra falls to 53.2 FPS, which is below the playability threshold. The verdict is clear: the system is fully capable of 1080p and 1440p gaming at maximum settings, and at 4K it can handle most presets but not the Ultra preset.

Best Settings per Resolution

For 1920x1080, the best settings are Ultra, which achieves 135.1 FPS on average. This is the most demanding preset and still provides a frame rate that is more than double the 60 FPS threshold, making it the ideal choice for users with high-refresh-rate displays.

At 2560x1440, Ultra is again the recommended setting, delivering 92.7 FPS. This is comfortably above 60 FPS and offers the best visual quality without sacrificing smoothness. The 92.7 FPS figure also leaves room for minor frame rate dips without dropping below the playability threshold.

For 3840x2160, High is the best setting that maintains 60 FPS or above, with an average of 61.9 FPS. While Medium (83.5 FPS) and Low (101.1 FPS) offer more headroom, High provides the best balance of visual fidelity and playability. Users who prioritize frame rate stability over maximum quality may prefer Medium, but High is the highest preset that stays above the threshold.

FAQ

Q: Can this system run Fivem at 4K with Ultra settings?

A: No. The measured average FPS at 3840x2160 with Ultra settings is 53.2 FPS, which falls below the 60 FPS playability threshold. The highest playable preset at this resolution is High, which averages 61.9 FPS.

Q: What is the best resolution-to-settings combination for this PC?

A: At 1920x1080, Ultra settings deliver 135.1 FPS, and at 2560x1440, Ultra delivers 92.7 FPS. Both provide the maximum visual quality while maintaining frame rates well above 60 FPS. At 3840x2160, the best playable option is High at 61.9 FPS.

Q: How much performance does increasing resolution from 1080p to 4K cost?

A: At Ultra settings, the average FPS drops from 135.1 at 1920x1080 to 92.7 at 2560x1440 and then to 53.2 at 3840x2160. This represents a 61% reduction in frame rate from 1080p to 4K.

Q: Is the CPU or GPU more important for this game at 1440p?

A: The data suggests a balance shift. At 2560x1440, the system still achieves 184 FPS on Low settings, indicating the CPU is capable of feeding the GPU. However, the gap between Low and Ultra (184 vs. 92.7 FPS) shows the GPU has a significant impact at this resolution.

Q: Which preset should be avoided at 4K?

A: The Ultra preset at 3840x2160 should be avoided, as it produces an average of 53.2 FPS, which is below the 60 FPS playability threshold. All other presets at this resolution are playable.

Q: How does this combination rank among all tested configurations?

A: This system ranks 725th out of 3707 tested combinations in Fivem, placing it in the top 20% of all configurations tested.

How This Combo Ranks

In the database of tested hardware combinations for Fivem, this specific pairing of the Intel Core i7-14700KF and NVIDIA GeForce RTX 5070 ranks 725th out of 3707 total combinations. This places the system in the top 19.6% of all tested configurations, confirming its position as a high-performance setup. The rank reflects the system's ability to maintain high frame rates across most resolutions and settings, with the only notable weakness being the 4K Ultra preset. The combination's strength lies in its consistency: it delivers playable performance in 11 out of 12 tested scenarios, with the sole exception being the most demanding configuration. This rank suggests that while there are faster combinations available, this system provides a robust experience for Fivem across the vast majority of display and quality settings.