Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 40 | 50 | 64 |
| 1440p QHD | 56 | 73 | 91 | 115 |
| 1080p Full HD | 86 | 111 | 138 | 175 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The Intel Core i7-14700K paired with the AMD Radeon RX 9060 presents a mixed performance profile for Fivem, heavily dependent on resolution and graphical preset. The CPU is a top-tier performer, ranking in the 94th percentile against all tested CPUs, while the GPU sits in the 59th percentile, creating a significant bottleneck at higher resolutions. Benchmark data shows that 1080p gaming is excellent, 1440p is strong, but 4K requires substantial settings reductions to maintain smooth gameplay.
FAQ
Q: What is the best settings preset for 1920x1080 resolution?
A: The Ultra preset delivers an average of 86 FPS, which is above the 60 FPS playable threshold. This is the most demanding setting that remains smooth at this resolution.
Q: Can this combination handle 4K (3840x2160) gaming?
A: Yes, but only with the Low preset, which achieves an average of 64 FPS. The Medium preset drops to 50 FPS average, and the High preset falls further to 40 FPS, both below the 60 FPS playability threshold.
Q: How does the CPU compare to its nearest rivals in overall benchmark scores?
A: The Intel Core i7-14700K has an average benchmark score of 69355. It is essentially tied with the AMD EPYC 9115, which scores 69288 (0.1% slower), and sits slightly behind the AMD Ryzen 9 7940HX, which scores 69875 (0.7% faster).
Q: How does the GPU compare to the NVIDIA GeForce RTX 3060 Ti?
A: The AMD Radeon RX 9060 has an average benchmark score of 16014, which is 0.7% lower than the RTX 3060 Ti's score of 16129. This makes the two graphics cards nearly identical in overall performance.
Q: What is the maximum average FPS recorded for this combination?
A: The highest average FPS is 175, achieved at 1920x1080 with the Low preset. This represents the absolute performance ceiling for this pairing.
Q: At which resolution is the Ultra preset playable?
A: The Ultra preset is only playable at 1920x1080, where it averages 86 FPS. At 2560x1440, the Ultra preset averages 56 FPS, which is below the 60 FPS threshold.
Best Settings per Resolution
For each resolution, the most demanding preset that maintains an average of at least 60 FPS is identified from the measured data.
At 3840x2160 (4K), the only playable preset is Low, producing an average of 64 FPS. The Medium preset drops to 50 FPS, making it unplayable by the 60 FPS standard. This indicates a hard performance ceiling for this GPU at 4K resolution.
At 2560x1440 (1440p), the best playable preset is High, with an average of 73 FPS. The Medium preset runs at 91 FPS, but High offers better visual quality while still clearing the threshold. The Ultra preset falls short at 56 FPS.
At 1920x1080 (1080p), the best playable preset is Ultra, delivering an average of 86 FPS. This is the only resolution where the most demanding settings are fully playable, with substantial headroom above the 60 FPS minimum.
CPU and GPU Roles
The performance scaling across resolutions reveals a clear division of labor between the CPU and GPU. The Intel Core i7-14700K is a high-end processor with an average benchmark score of 69355, ranking in the 94th percentile. The AMD Radeon RX 9060 is a mid-range GPU with an average score of 16014, ranking in the 59th percentile. This discrepancy means the GPU becomes the limiting factor as resolution increases.
At 1920x1080, the CPU is doing the heavy lifting. The Ultra preset averages 86 FPS, but dropping to Low yields 175 FPS, a 203% increase. This massive scaling shows the GPU is not saturated; the CPU's strong single-thread performance (4472 in Passmark single thread) is driving the high frame rates. The delta between Low and Ultra is 89 FPS, indicating the GPU has ample headroom at this resolution.
At 2560x1440, the balance shifts. The High preset averages 73 FPS, while Low reaches 115 FPS, a 57% difference. The Medium preset's average of 91 FPS with minimums of 77 FPS suggests the GPU is becoming more involved, but the CPU still contributes significantly. The scaling from Low to Ultra (115 to 56 FPS) shows a 59 FPS drop, demonstrating that the GPU's load is increasing but the CPU remains capable of feeding it.
At 3840x2160, the GPU is the definitive bottleneck. The High preset averages 40 FPS, and even Low only reaches 64 FPS. The scaling from Low to High is just 24 FPS, indicating the GPU is fully saturated. The CPU's performance becomes largely irrelevant at this resolution, as the RX 9060 cannot produce enough frames regardless of the processor's capabilities. The 8 GB GDDR6 memory and 128-bit bus width are insufficient for the data demands of 4K rendering in Fivem.
The Verdict
The data confirms that this combination can run Fivem, but the experience varies dramatically by resolution. At 1920x1080, all four presets are playable, including Ultra at 86 FPS average. This is the ideal resolution for this pairing, offering smooth performance with maximum visual settings.
At 2560x1440, the system remains capable, with High, Medium, and Low presets all clearing 60 FPS. The High preset at 73 FPS is the recommended choice, providing a good balance of visual quality and performance. Ultra is not playable, averaging only 56 FPS.
At 3840x2160, the system barely meets the playability standard. Only the Low preset averages 64 FPS, which is just above the threshold. The Medium preset drops to 50 FPS, and High falls to 40 FPS. Users targeting 4K will need to accept significant visual compromises.
The overall ranking of this combo is 2172 out of 3707 tested combinations, placing it in the lower-middle range of all tested systems for this game. This ranking reflects the GPU's limitations at higher resolutions, despite the CPU's strong performance.
Similar Performance Alternatives
Based on nearest rival data, several alternative CPUs and GPUs would produce similar results in Fivem.
For the CPU, the AMD Ryzen 9 7950X has an average benchmark score of 69515, which is 0.2% higher than the i7-14700K's 69355. This makes it functionally equivalent in gaming workloads. The AMD EPYC 9115 scores 69288, a 0.1% difference, also performing nearly identically. The AMD Ryzen 9 7940HX scores 69875, 0.7% faster, representing a marginal upgrade. The AMD Ryzen 7 9700F scores 69996, 0.9% faster, offering slightly better overall performance.
For the GPU, the NVIDIA GeForce RTX 3060 Ti has an average score of 16129, just 0.7% higher than the RX 9060's 16014. This means the RTX 3060 Ti would deliver nearly identical frame rates in Fivem. The AMD Radeon RX 7700 scores 15852, just 1.0% lower, also matching performance closely. The AMD Radeon R9 370X scores 15862, a 1.0% difference, and the AMD Radeon Pro W5500 scores 15679, 2.1% lower. These alternatives would produce similar FPS figures, with the RTX 3060 Ti being the closest match.
How This Combo Ranks
This specific combination of the Intel Core i7-14700K and AMD Radeon RX 9060 ranks 2172 out of 3707 tested combinations in Fivem. This places the setup in the 58.6th percentile of all tested systems, meaning roughly 41% of tested combinations perform better.
The ranking reflects the significant imbalance between the CPU and GPU. The i7-14700K ranks in the 94th percentile among all CPUs, but the RX 9060 only ranks in the 59th percentile among GPUs. This mismatched pairing results in a system that is heavily CPU-limited at 1080p but GPU-limited at 4K. The mid-pack overall ranking suggests that while the system is competent at lower resolutions, it cannot compete with balanced high-end configurations at higher resolutions.
The combo's performance at 1920x1080, where it achieves 86 FPS on Ultra, is respectable, but the 4K performance of 64 FPS on Low reveals the GPU's constraints. Users prioritizing 4K gaming would see better results with a higher-performing GPU, while those focused on 1080p or 1440p will find this pairing more than adequate.
Measured FPS Breakdown
The following table details the exact average, minimum, and maximum FPS values recorded for each resolution and settings preset combination.
3840x2160:
- High: Average 40 FPS, no min/max data recorded.
- Low: Average 64 FPS, no min/max data recorded.
- Medium: Average 50 FPS, minimum 43 FPS, maximum 58 FPS.
- Ultra: Average 31 FPS, no min/max data recorded.
2560x1440:
- High: Average 73 FPS, no min/max data recorded.
- Low: Average 115 FPS, no min/max data recorded.
- Medium: Average 91 FPS, minimum 77 FPS, maximum 105 FPS.
- Ultra: Average 56 FPS, no min/max data recorded.
1920x1080:
- High: Average 111 FPS, no min/max data recorded.
- Low: Average 175 FPS, no min/max data recorded.
- Medium: Average 138 FPS, minimum 117 FPS, maximum 159 FPS.
- Ultra: Average 86 FPS, no min/max data recorded.
The data reveals consistent patterns. The Medium preset consistently shows the widest frame time variance, with the 1080p run showing a 42 FPS range between minimum and maximum. The 1440p Medium preset shows a 28 FPS range, and the 4K Medium preset shows a 15 FPS range. This suggests that the Medium preset introduces more frame pacing variability than Low or High, which may be perceptible to sensitive users.
The 1080p Low preset at 175 FPS is notably high, indicating that the CPU is capable of driving frame rates far beyond what the GPU can render at higher settings. This headroom could be useful for users with high-refresh-rate monitors, though the game's engine may cap frame rates in practice.