Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Try lowering shadows and anti-aliasing for better FPS.
A better graphics card would significantly improve performance.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 54 | 67 | 82 |
| 1440p QHD | 73 | 96 | 120 | 146 |
| 1080p Full HD | 110 | 144 | 181 | 228 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
This analysis examines the measured performance of the Intel Core i7-13700K paired with the NVIDIA GeForce RTX 3070 Ti in Fivem. The data is based on direct measurements across three resolutions and four quality presets, with a playability threshold of 60 FPS. The CPU sits in the 89th percentile of all tested processors, while the GPU ranks in the 75th percentile, giving this combo a solid foundation for most gaming workloads.
Measured FPS Breakdown
The measured FPS data reveals a clear performance hierarchy across resolutions and settings. At 1920x1080, the combo delivers exceptional headroom. With Low settings, the average frame rate reaches 228.2 FPS, which is more than triple the 60 FPS playability threshold. Medium settings still produce 180.6 FPS average, while High settings yield 144.1 FPS. Even the most demanding Ultra preset maintains a strong 109.8 FPS average. This resolution shows no weaknesses, with every preset comfortably exceeding 60 FPS by a wide margin.
Moving to 2560x1440, performance remains strong but begins to show scaling pressure. Low settings produce 146.1 FPS average, and Medium follows at 119.9 FPS. High settings drop to 96.2 FPS, still well above the threshold. Ultra settings at this resolution deliver 73 FPS average, which clears 60 FPS but with less headroom than lower presets. The gap between Low and Ultra at 1440p is roughly 73 FPS, indicating that the GPU is becoming a more significant factor as resolution increases.
At 3840x2160, the picture changes substantially. Low settings average 81.7 FPS, which remains playable, and Medium settings average 67.1 FPS, just above the threshold. However, High settings fall to 54 FPS average, which is below the 60 FPS target. Ultra settings at 4K drop further to 41.5 FPS average. This represents a clear boundary: at 4K, only Low and Medium presets are viable for maintaining 60 FPS. The scaling from Medium to High at 4K costs approximately 13 FPS, while the jump from High to Ultra costs another 12.5 FPS, showing the steep cost of pushing max quality at this resolution.
The data shows no minimum or maximum FPS values were recorded, so the analysis relies solely on average frame rates. However, the pattern is consistent: 1080p offers maximum flexibility, 1440p balances quality and speed, and 4K demands careful preset selection.
FAQ
Q: Can this combo run Fivem at 4K with High settings?
A: No. At 3840x2160 with High settings, the measured average FPS is 54, which falls below the 60 FPS playability threshold. The verdict data shows only Low and Medium settings are playable at 4K.
Q: What is the best preset for 1440p gaming?
A: Ultra settings at 2560x1440 produce an average of 73 FPS, which clears the 60 FPS threshold. This makes Ultra the most demanding playable preset at this resolution, offering the highest visual quality while maintaining smooth performance.
Q: How does the combo perform at 1080p with Ultra settings?
A: The average FPS at 1920x1080 with Ultra settings is 109.8. This is nearly double the playability threshold, providing substantial headroom for multiplayer scenarios where frame rates can fluctuate.
Q: Which resolution offers the largest margin above 60 FPS?
A: At 1920x1080 with Low settings, the average FPS of 228.2 provides the largest margin above the threshold. Even at Ultra settings, 1080p delivers 109.8 FPS, a margin of nearly 50 FPS.
Q: Is there a setting at 4K that exceeds 80 FPS?
A: Yes. At 3840x2160 with Low settings, the average FPS is 81.7. This is the only 4K preset that exceeds 80 FPS, and it remains comfortably above the 60 FPS threshold.
Q: What is the performance difference between Medium and High at 4K?
A: Medium settings at 4K average 67.1 FPS, while High settings average 54 FPS. The difference is 13.1 FPS, and it represents the critical drop below the 60 FPS threshold at this resolution.
How This Combo Ranks
The Intel Core i7-13700K with NVIDIA GeForce RTX 3070 Ti ranks 1299 out of 3707 tested combos for Fivem. This places it in roughly the 65th percentile of all combinations in the database. The CPU itself benchmarks at an average score of 46881, sitting just 0.2% below the AMD Ryzen 9 5900 and 0.3% below the AMD Ryzen AI 9 HX PRO 375. The GPU averages 29945 in benchmarks, with the RTX 5070 Mobile within 0.1% and the AMD Radeon RX 6800 trailing by 0.5%.
The rank suggests this is a mid-to-upper tier combo for Fivem specifically. The measured FPS data confirms this positioning: at 1080p, the combo is overkill for most presets, while at 4K it requires compromise. The combination of a strong 16-core CPU and a capable 8 GB GDDR6X GPU places it ahead of many alternatives, but not at the top tier where 4K Ultra would be feasible. The 1299 rank out of 3707 indicates that roughly 35% of tested combos perform better, which aligns with the 4K High preset falling short of 60 FPS.
The nearest CPU rivals show minimal performance deltas, ranging from -0.3% to +0.5%, meaning the i7-13700K is well-matched against its direct competitors. The GPU rivals similarly cluster within -1.6% to +0.5%, indicating the RTX 3070 Ti holds its own against comparable options. This combo's ranking is therefore driven more by the game's optimization and resolution demands than by any single component bottleneck.
The Verdict
The data clearly answers whether this PC can run Fivem: yes, at most resolutions and presets, with specific limitations at 4K. At 1920x1080, all four presets—Low, Medium, High, and Ultra—exceed 60 FPS, with even the lowest preset average of 109.8 FPS at Ultra. At 2560x1440, the same is true: all presets clear the threshold, with Ultra averaging 73 FPS. The only resolution where this combo struggles is 3840x2160, where High settings produce 54 FPS and Ultra drops to 41.5 FPS.
For players targeting 1080p or 1440p, this combo is fully capable of running Fivem at maximum quality without compromise. At 4K, the viable options narrow to Low and Medium settings, with Medium providing the best balance at 67.1 FPS average. The verdict data confirms this: 4K playable settings are Low and Medium, while 1440p and 1080p include all four presets as playable.
The practical takeaway is that this system handles Fivem excellently at mainstream resolutions, and only extreme 4K Ultra demands are beyond its reach. Players with 1440p monitors can enable Ultra settings and enjoy smooth gameplay. Those with 4K displays should stick to Medium or lower for a consistent 60 FPS experience.
CPU and GPU Roles
The scaling between resolutions and presets reveals how the workload shifts between the Intel Core i7-13700K and the NVIDIA GeForce RTX 3070 Ti. At 1920x1080, the CPU's strength dominates. The i7-13700K ranks in the 89th percentile of all CPUs, with a multi-threaded PassMark score of 45887 and a single-thread score of 4333. This processing power drives the 228.2 FPS average at Low settings, where the GPU is not the limiting factor. The difference between Low and Ultra at 1080p is 118.4 FPS, showing that preset changes have a major impact, but the absolute numbers indicate the GPU has ample headroom.
As resolution increases to 2560x1440, the GPU begins to exert more influence. The RTX 3070 Ti's 8 GB of GDDR6X memory and 608.3 GB/s bandwidth become more relevant, and the FPS gap between Low and Ultra narrows to 73.1 FPS. The average scores show the GPU ranking in the 75th percentile, with a PassMark G3D score of 23356. At 1440p, the combo still delivers playable Ultra performance, but the margin shrinks, suggesting the GPU is starting to take on a more significant role.
At 3840x2160, the GPU becomes the clear bottleneck. The FPS range from Low to Ultra is 40.2 FPS (81.7 to 41.5), and the High preset falls below 60 FPS. The GPU's memory bandwidth and 21.75 TFLOPS of FP32 performance are insufficient for 4K Ultra, while the CPU continues to provide adequate processing. The CPU's Cinebench R23 multi-core score of 30745 and Geekbench multi-core score of 19429 indicate it is not the limiting factor at any resolution. The data shows that at 4K, lowering settings is the only way to maintain playability, which is a GPU-driven constraint. In contrast, at 1080p, the GPU is barely stressed, and the CPU's strength allows for extremely high frame rates.
Best Settings per Resolution
For 1920x1080, the best settings are Ultra, producing an average of 109.8 FPS. This is the most demanding preset that stays at or above 60 FPS, and it offers the highest visual quality with a comfortable margin of nearly 50 FPS above the threshold. There is no reason to lower settings at this resolution, as even the heaviest preset maintains excellent performance.
At 2560x1440, Ultra is also the best choice, with an average of 73 FPS. This clears the 60 FPS target by 13 FPS, providing smooth gameplay while maximizing visual fidelity. While the margin is smaller than at 1080p, it remains sufficient for a consistent experience. Players who prioritize frame rate stability over visuals could drop to High at 96.2 FPS, but Ultra remains viable.
For 3840x2160, the best settings are Medium, which averages 67.1 FPS. This is the most demanding preset that stays above 60 FPS at 4K. Low settings are also playable at 81.7 FPS, but Medium offers better visual quality while still clearing the threshold. High settings at 54 FPS and Ultra at 41.5 FPS are not recommended for a 60 FPS target. The verdict data confirms Medium as the optimal 4K preset for this combo.