Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

96%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
224 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
150 FPS
Ultra 1440p Measured
72 FPS

4K (Ultra HD)

Low 4K Measured
85 FPS
Ultra 4K Measured
41 FPS
6.9ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 35,365
Graphics Card
Required 27,716
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 54 64 85
1440p QHD 72 96 118 150
1080p Full HD 110 145 178 224

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 145
1920x1080 Low 224
1920x1080 Medium 178
1920x1080 Ultra 110
2560x1440 High 96
2560x1440 Low 150
2560x1440 Medium 118
2560x1440 Ultra 72
3840x2160 High 54
3840x2160 Low 85
3840x2160 Medium 64
3840x2160 Ultra 41

Performance Analysis: Fivem on Your System

The Intel Core i7-12700KF and NVIDIA GeForce RTX 3070 Ti combination delivers a compelling performance profile for Fivem, a multiplayer title with demanding CPU and GPU scaling. The benchmark data shows a system that comfortably handles 1080p and 1440p at maximum settings, while 4K requires a preset adjustment to maintain a smooth frame rate. This analysis breaks down the measured results, component roles, and comparative standing.

FAQ

Q: What is the highest preset that stays above 60 FPS at 1920x1080?

A: The Ultra preset runs at an average of 109.9 FPS, which is above the 60 FPS playable threshold.

Q: Can this combo run the game at 3840x2160 with High settings?

A: No. The High preset at 4K produces an average of 53.9 FPS, which falls below the 60 FPS threshold. The playable settings at this resolution are Low (84.7 FPS) and Medium (64.1 FPS).

Q: Which resolution shows the largest FPS drop between Low and Ultra settings?

A: At 1920x1080, the drop from Low (224.2 FPS) to Ultra (109.9 FPS) is a reduction of 114.3 FPS, which is the largest absolute difference across all tested resolutions.

Q: How does the RTX 3070 Ti compare to its nearest GPU rival in average benchmark score?

A: The RTX 3070 Ti has an average benchmark score of 29945. Its nearest rival, the AMD Radeon RX 6800, scores 30095, which is 0.5% higher. The NVIDIA GeForce RTX 2080 Ti scores 29783, which is 0.5% lower.

Q: What is the best playable setting at 2560x1440 according to the verdict data?

A: The Ultra preset is the best playable setting, delivering an average of 72.3 FPS at that resolution, which exceeds the 60 FPS threshold.

Q: What percentile does the CPU rank in compared to all other CPUs?

A: The Intel Core i7-12700KF ranks in the 85th percentile among all CPUs, while the GPU ranks in the 75th percentile among all GPUs.

CPU and GPU Roles

Fivem’s performance scaling across resolutions reveals a clear division of labor between the Intel Core i7-12700KF and the NVIDIA GeForce RTX 3070 Ti. At 1920x1080, the CPU’s influence is dominant. The data shows a massive range from Low settings at 224.2 FPS down to Ultra at 109.9 FPS, indicating that the GPU is not the bottleneck at lower presets. The processor, with its 12 cores and 20 threads, is capable of feeding frames at rates exceeding 200 FPS when graphical load is light.

As resolution increases to 2560x1440, the GPU begins to assert more control. The Low preset drops to 149.9 FPS, a reduction of 74.3 FPS from the 1080p Low result. This delta is nearly identical to the drop seen at High settings, which falls from 144.7 FPS to 95.9 FPS. The consistent decline across all presets points to the RTX 3070 Ti’s pixel throughput becoming a limiting factor, though the CPU still has enough headroom to keep the system above 70 FPS even at Ultra.

The 3840x2160 results show a definitive GPU-bound scenario. The gap between Low (84.7 FPS) and Medium (64.1 FPS) is 20.6 FPS, while the gap between Medium and High (53.9 FPS) is only 10.2 FPS. This compression at higher settings indicates that the GPU's memory bandwidth of 608.3 GB/s and 8 GB of GDDR6X memory are being saturated. The CPU’s role diminishes further; even at Low settings, the frame rate is below the 1080p Ultra result, suggesting that the GPU is the primary constraint across all presets at 4K. The benchmark data indicates that for a 60 FPS target, the CPU is sufficient at all resolutions, but the GPU dictates the maximum achievable preset.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is as follows:

  • 1920x1080: Ultra preset at 109.9 FPS average. This is the maximum quality setting available and it clears the threshold by a wide margin.
  • 2560x1440: Ultra preset at 72.3 FPS average. This preset also clears the 60 FPS threshold, providing full visual fidelity at a playable frame rate.
  • 3840x2160: Medium preset at 64.1 FPS average. This is the highest preset that stays above 60 FPS. The High preset falls to 53.9 FPS, so Medium is the optimal choice for 4K.

The Verdict

The data confirms that this PC can run Fivem successfully. At 1920x1080, all four presets—Low, Medium, High, and Ultra—deliver average frame rates above the 60 FPS playable threshold, with Ultra achieving 109.9 FPS. At 2560x1440, the same is true; all presets are playable, and Ultra holds an average of 72.3 FPS. The situation changes at 3840x2160, where only Low (84.7 FPS) and Medium (64.1 FPS) are playable. The High preset at 53.9 FPS and Ultra at 40.9 FPS do not meet the 60 FPS requirement.

The verdict by resolution is clear: the system is fully playable at 1080p and 1440p with maximum settings, and at 4K it requires dropping to Medium settings for a consistent 60 FPS experience. The data indicates that the RTX 3070 Ti’s 8 GB frame buffer and 256-bit memory interface are the limiting factors at 4K Ultra, where the average frame rate drops to 40.9 FPS.

Measured FPS Breakdown

The measured FPS data reveals the full performance envelope of this combo across all tested scenarios.

1920x1080:

  • Low: 224.2 FPS average
  • Medium: 177.6 FPS average
  • High: 144.7 FPS average
  • Ultra: 109.9 FPS average

The scaling from Low to Ultra at 1080p shows a 114.3 FPS spread, indicating that the CPU and GPU are balanced enough to scale predictably with graphical load.

2560x1440:

  • Low: 149.9 FPS average
  • Medium: 118.0 FPS average
  • High: 95.9 FPS average
  • Ultra: 72.3 FPS average

The 1440p results show a tighter spread of 77.6 FPS between Low and Ultra, as the GPU’s rendering load increases and the CPU’s headroom becomes less relevant.

3840x2160:

  • Low: 84.7 FPS average
  • Medium: 64.1 FPS average
  • High: 53.9 FPS average
  • Ultra: 40.9 FPS average

At 4K, the spread is 43.8 FPS, with the Ultra preset falling to 40.9 FPS. This is the only resolution where the High and Ultra presets fail to reach 60 FPS, confirming the GPU as the bottleneck.

How This Combo Ranks

In the benchmark database, this specific combination of the Intel Core i7-12700KF and NVIDIA GeForce RTX 3070 Ti ranks 1301 out of 3707 tested combos for Fivem. This places it in the upper third of all tested systems, which is consistent with its performance metrics. The rank reflects a system that is capable of high-refresh-rate gaming at 1080p and solid 60 FPS performance at 1440p, but it is not in the top tier for 4K Ultra gaming.

The data indicates that the combo’s ranking is driven more by the GPU’s limitations at higher resolutions than by CPU performance. The CPU’s 85th percentile standing among all processors suggests that it is not the weak link, while the GPU’s 75th percentile ranking is more indicative of the system’s overall position.

Similar Performance Alternatives

Based on the nearest rivals for both components, several other hardware combinations would behave similarly in Fivem.

For the CPU (Intel Core i7-12700KF, avg score 35365):

  • Intel Core i7-13700T (avg score 35403, delta 0.1%): This chip performs almost identically, with a score that is 0.1% higher. Systems using this CPU would show the same frame rates within a negligible margin.
  • Intel Core i5-13600T (avg score 35305, delta -0.2%): This processor is 0.2% slower in average benchmark score, resulting in a performance difference that is imperceptible in real gaming.
  • Intel Core i7-12700K (avg score 35287, delta -0.2%): This is the closest sibling, with a score 0.2% lower. It would produce virtually identical results.

For the GPU (NVIDIA GeForce RTX 3070 Ti, avg score 29945):

  • AMD Radeon RX 6800 (avg score 30095, delta -0.5%): This AMD card scores 0.5% higher, meaning it would deliver slightly better frame rates, likely pushing the 4K High preset closer to the 60 FPS threshold.
  • NVIDIA GeForce RTX 2080 Ti (avg score 29783, delta 0.5%): This older flagship is 0.5% slower, so it would produce marginally lower FPS, potentially making the 4K Medium preset the only playable option.
  • AMD Radeon RX 6700 (avg score 30433, delta -1.6%): This card is 1.6% faster, which could translate to a few extra frames at 1440p Ultra, but it would not change the overall verdict of which settings are playable.

Users with these alternative components can expect the same general performance classification: fully playable at 1080p and 1440p with Ultra settings, and requiring Medium settings at 4K for a 60 FPS experience.