Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

97%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
308 FPS
Ultra 1080p Measured
148 FPS

1440p (2K / QHD)

Low 1440p Measured
199 FPS
Ultra 1440p Measured
98 FPS

4K (Ultra HD)

Low 4K Measured
111 FPS
Ultra 4K Measured
54 FPS
5.1ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 35,287
Graphics Card
Required 27,716
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 54 69 85 111
1440p QHD 98 127 158 199
1080p Full HD 148 195 242 308

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 195
1920x1080 Low 308
1920x1080 Medium 242
1920x1080 Ultra 148
2560x1440 High 127
2560x1440 Low 199
2560x1440 Medium 158
2560x1440 Ultra 98
3840x2160 High 69
3840x2160 Low 111
3840x2160 Medium 85
3840x2160 Ultra 54

Performance Analysis: Fivem on Your System

The Intel Core i7-12700K paired with the NVIDIA GeForce RTX 4070 Ti is a formidable combination for Fivem, delivering playable frame rates across all tested resolutions and presets, with the sole exception of 4K Ultra settings. The data shows this combo ranks 498th out of 3707 tested configurations, placing it in the top 13.4% of all systems. At 1080p and 1440p, this pairing provides a massive performance buffer, allowing maxed-out settings with average frame rates well above the 60 FPS playability threshold. The only scenario where the system falls short is at 3840x2160 with Ultra settings, where the average drops to 54.4 FPS. For every other combination of resolution and preset, the system clears the 60 FPS bar, often by a substantial margin.

Measured FPS Breakdown

At 1920x1080, the benchmark results indicate exceptional performance across all presets. With Low settings, the system achieves an average of 308.4 FPS. Moving to Medium settings, the average remains remarkably high at 241.6 FPS. High settings deliver 194.9 FPS on average, and even the most demanding Ultra preset produces an average of 148.2 FPS. These figures demonstrate that at 1080p, the RTX 4070 Ti is rarely the limiting factor, with even the heaviest visual configuration leaving ample headroom above the 60 FPS threshold.

Stepping up to 2560x1440, the system continues to impress but shows expected scaling pressures. Low settings yield an average of 198.9 FPS, while Medium settings drop to 157.8 FPS. High settings maintain a strong 127.3 FPS average, and Ultra settings still deliver a comfortable 97.6 FPS. The scaling from 1080p to 1440p shows a consistent reduction in frame rates across all presets, with the Ultra preset experiencing the largest relative drop from 148.2 to 97.6 FPS, a decrease of roughly 34%.

At 3840x2160, the performance picture changes more dramatically. Low settings produce an average of 110.8 FPS, which remains highly playable. Medium settings follow at 84.9 FPS, and High settings manage 69.4 FPS. However, Ultra settings fall below the playability threshold, averaging just 54.4 FPS. This represents a significant scaling penalty: moving from 1440p Ultra to 4K Ultra reduces the average frame rate by 43.2 FPS, indicating that the combination of 4K resolution and maximum settings exceeds what this hardware can sustain at 60 FPS.

Notably, the measured data does not include minimum or maximum frame rate values, only averages. This means the analysis relies solely on average FPS figures, which can mask transient stutters or frame time spikes. For a multiplayer title like Fivem, where consistency matters, the absence of min/max data is a limitation in the assessment.

CPU and GPU Roles

The scaling behavior across resolutions reveals how the balance between CPU and GPU shifts. At 1920x1080, the frame rates are exceptionally high—ranging from 148.2 to 308.4 FPS—which suggests the Intel Core i7-12700K is providing ample single-thread performance to feed the RTX 4070 Ti. The 12700K's 3DMark single-thread score of 1043 and 2-thread score of 2065 support this, indicating strong per-core capability that matters in Fivem's multiplayer scenarios, where multiple player characters and networked entities impose CPU overhead.

As resolution increases to 2560x1440, the GPU begins to take on a more significant role. The frame rate drop from 1080p to 1440p ranges from 35% to 40% depending on preset, which aligns with the increased pixel count. At this resolution, the RTX 4070 Ti's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth become more relevant, as the rendering workload grows. The system still maintains triple-digit FPS on Low through High presets, indicating that neither component is severely bottlenecked.

At 3840x2160, the GPU clearly becomes the dominant constraint. The RTX 4070 Ti, with its 7680 shading units and 40.09 TFLOPS FP32 performance, is pushed to its limits. The gap between 1440p and 4K performance widens considerably, particularly at Ultra settings where the frame rate falls from 97.6 to 54.4 FPS. This suggests that at 4K, the GPU's raw fillrate and memory bandwidth are the primary determinants of performance, while the CPU's role diminishes. The 12700K's multi-threaded capabilities, evidenced by a Cinebench R23 multi-core score of 19784, become less critical at this resolution.

The preset scaling also tells a story about component roles. At 1080p, moving from Low to Ultra reduces FPS from 308.4 to 148.2, a 52% reduction. At 1440p, the same preset change reduces FPS from 198.9 to 97.6, a 51% reduction. At 4K, it drops from 110.8 to 54.4, a 51% reduction. This consistent percentage drop across resolutions indicates that the visual settings workload scales relatively uniformly, with the absolute impact growing as the base resolution increases.

Best Settings per Resolution

For 1920x1080, the most demanding preset that maintains at or above 60 FPS is Ultra, which achieves an average of 148.2 FPS. This leaves enormous headroom, allowing players to enable maximum visual fidelity without any concern about hitting the playability threshold. Even if frame rates were to dip in demanding multiplayer scenarios, the 88.2 FPS buffer provides substantial safety margin.

At 2560x1440, Ultra settings also remain playable, with an average of 97.6 FPS. This is the recommended choice for this resolution, as it delivers the best visual quality while still staying 37.6 FPS above the threshold. The system has sufficient performance to handle the added pixel load without sacrificing settings.

At 3840x2160, the situation changes. High settings are the most demanding preset that stays at or above 60 FPS, averaging 69.4 FPS. While Medium (84.9 FPS) and Low (110.8 FPS) also qualify, High offers the best balance of visual quality and performance. Ultra settings fall short at 54.4 FPS, making them unsuitable for maintaining a consistent 60 FPS experience. Players targeting 4K should stick with High settings to ensure smooth gameplay.

Similar Performance Alternatives

Looking at the nearest rivals for the Intel Core i7-12700K, several CPUs offer nearly identical average benchmark scores. The Intel Core i5-13600T scores 35305, just 0.1% lower than the 12700K's 35287 average. The Intel Core i7-12700KF scores 35365, a 0.2% difference. The Intel Core i7-13700T achieves 35403, which is 0.3% higher. The Intel Core 5 213PE scores 35428, representing a 0.4% advantage. These deltas are negligible in real-world terms, meaning any of these CPUs would deliver essentially the same FPS in Fivem when paired with the RTX 4070 Ti. The 12700KF, being a variant of the same chip without integrated graphics, would behave almost identically.

For the NVIDIA GeForce RTX 4070 Ti, the nearest rivals show slightly more variance. The NVIDIA GeForce RTX 5090 Mobile scores 45152, which is 0.8% lower. The AMD Radeon Pro 5500 XT scores 45384, 1.3% lower. The NVIDIA RTX A6000 scores 44075, which is 1.6% higher than the 4070 Ti's 44795 average. The Intel Arc A730M scores 45592, 1.7% lower. These differences fall within a narrow band of roughly ±2%, suggesting that swapping the 4070 Ti for any of these GPUs would produce comparable frame rates in Fivem at most resolutions and presets. However, the RTX A6000's slightly higher score implies it might edge out the 4070 Ti by a couple of FPS in GPU-bound scenarios like 4K Ultra.

It is important to note that these rival comparisons are based on synthetic benchmark averages, not direct Fivem measurements. The actual in-game performance could differ due to driver optimizations, but the close scores indicate these alternatives would land within a few percentage points of the tested combo.

How This Combo Ranks

The combination of the Intel Core i7-12700K and NVIDIA GeForce RTX 4070 Ti ranks 498th out of 3707 tested combos in Fivem. This places the system in the top 13.4% of all configurations evaluated, which is a strong showing for a mid-to-high-end desktop pairing. The rank reflects the overall performance potential of this hardware in the context of Fivem's specific workload, which blends traditional rendering with multiplayer networking demands.

Given the measured FPS data, this ranking makes sense. The system delivers over 60 FPS in 11 of 12 tested scenarios, with only 4K Ultra falling short. In a game like Fivem, where many players may use lower-end hardware, this combo would provide a smoother experience than the vast majority of systems. The 84th percentile standing for both the CPU and GPU in their respective benchmark databases further reinforces that this is a well-above-average configuration.

The Verdict

Yes, this PC can run Fivem effectively across nearly all settings and resolutions. At 1920x1080, all four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold, with the lowest performer (Ultra) still averaging 148.2 FPS. At 2560x1440, the same is true: all settings are playable, with Ultra averaging 97.6 FPS. At 3840x2160, the system handles Low (110.8 FPS), Medium (84.9 FPS), and High (69.4 FPS) without issue, but Ultra falls short at 54.4 FPS.

The verdict by resolution is clear: for 1080p and 1440p, players can max out settings and enjoy frame rates far above the 60 FPS target. For 4K, High settings are the ceiling for a consistent 60 FPS experience, and those seeking Ultra fidelity would need to accept a frame rate below the playability threshold or reduce resolution. The combination of the 12700K's strong single-thread performance and the RTX 4070 Ti's substantial rasterization power makes this a highly capable system for Fivem, with only the most extreme 4K Ultra configuration proving too demanding.