Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 60 | 75 | 95 |
| 1440p QHD | 84 | 108 | 135 | 171 |
| 1080p Full HD | 127 | 163 | 196 | 213 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The Intel Core i5-9400 paired with the NVIDIA GeForce RTX 3080 Ti delivers a playable experience in Fivem, but the balance of performance shifts dramatically depending on resolution. At 4K, the combination lands exactly at the 60 FPS threshold on High settings, while at 1440p and 1080p, it provides substantial headroom, allowing for Ultra presets with average frame rates well above the playability mark. Benchmark results indicate that this pairing is capable of handling the game smoothly across all tested resolutions, though the margin for error at 4K is slim.
Measured FPS Breakdown
The recorded data provides a clear picture of performance across three resolutions and four quality presets. At 1920x1080, the combination shows its strongest results. With Low settings, the average frame rate reaches 213 FPS. Moving to Medium, the average drops to 196 FPS, with a recorded minimum of 166 FPS and a maximum of 225 FPS. High settings produce an average of 163 FPS. The most demanding preset, Ultra, still maintains an average of 127 FPS, which is more than double the playable threshold.
At 2560x1440, the performance scales down predictably. Low settings yield an average of 171 FPS. Medium settings average 135 FPS, with the minimum and maximum recorded at 114 FPS and 155 FPS respectively. High settings deliver 108 FPS on average. Ultra settings remain comfortably playable with an average of 84 FPS, indicating that the GPU has enough power to handle the higher pixel count without forcing a compromise on visual quality.
The 3840x2160 resolution tells a more constrained story. Low settings produce an average of 95 FPS, which is still a strong result. Medium settings average 75 FPS, with a minimum of 63 FPS and a maximum of 86 FPS. High settings bring the average down to exactly 60 FPS, which meets the playable threshold but leaves no room for frame rate dips. Ultra settings fall below the playability line, averaging 46 FPS, which is not sufficient for a smooth experience. The data shows that at 4K, the preset choice is critical, as the difference between High and Ultra is a 14 FPS drop in the average.
How This Combo Ranks
The database places this specific CPU and GPU combination at rank 1041 out of 3707 tested combos for Fivem. This position, roughly in the 72nd percentile of all tested pairings, indicates that this setup performs above the median but is not among the top-tier configurations. The ranking reflects a balance where the GPU is exceptionally strong, but the CPU, with its 6 cores and 6 threads, may limit the overall result in certain scenarios.
The rank suggests that many other combinations, likely those with more modern or higher-core-count processors, achieve better performance in Fivem. However, the 1041st position out of 3707 combos still places this pairing in the upper third of all tested systems. For a game like Fivem, which is a multiplayer modification of Grand Theft Auto V, the data shows that this combo is more than capable of delivering high frame rates, especially at lower resolutions, even if it does not top the charts.
CPU and GPU Roles
The performance scaling between resolutions reveals which component is the limiting factor. At 1920x1080, the average frame rates are exceptionally high, with Low settings reaching 213 FPS and Ultra still hitting 127 FPS. This suggests that at 1080p, the GPU is not fully stressed, and the CPU is likely the primary driver of performance, as the frame rates are high enough to expose any processor bottleneck. The gap between Low and Ultra at 1080p is 86 FPS, which shows that the settings have a significant impact, but even the lowest preset produces more frames than most displays can show.
At 2560x1440, the frame rates drop by roughly 20-25% across all presets compared to 1080p. For example, Ultra goes from 127 FPS to 84 FPS, and High goes from 163 FPS to 108 FPS. This scaling is consistent with the GPU taking on more rendering work as the pixel count increases. The RTX 3080 Ti, with its 12 GB of GDDR6X memory and 384-bit bus, is well-suited for this resolution, and the data indicates that it remains the dominant factor, as the CPU is less likely to bottleneck at these higher frame rates.
At 3840x2160, the picture changes. The average frame rates drop significantly, with Ultra falling to 46 FPS and High to 60 FPS. The difference between Medium and High at 4K is 15 FPS, while the difference between Low and Medium is 20 FPS. This steep decline at the highest resolution points to the GPU becoming the clear limiting factor. The i5-9400, with its 6 threads, is likely not the bottleneck at 4K, as the GPU is fully occupied with rendering the much larger frame. The data shows that at 4K, the GPU is the sole constraint, and the CPU's role diminishes.
FAQ
Q: What is the best preset for 1920x1080 to stay at or above 60 FPS?
A: All four presets are playable at 1080p. The most demanding preset that stays at or above 60 FPS is Ultra, which averages 127 FPS.
Q: Can this combo handle 4K gaming in Fivem?
A: Yes, but only up to High settings. The average at High is 60 FPS, which meets the playable threshold. Ultra settings average 46 FPS, which is below the 60 FPS requirement.
Q: How much of a performance drop occurs when moving from 1440p to 4K on Medium settings?
A: The average frame rate drops from 135 FPS at 2560x1440 to 75 FPS at 3840x2160, a reduction of 60 FPS.
Q: Which component is more important at 1080p for this game?
A: The data shows that at 1080p, frame rates are very high across all presets, indicating that the CPU is the primary factor, as the GPU is not fully utilized at these lower resolutions.
Q: What is the minimum FPS recorded for this combo in the database?
A: The lowest minimum FPS recorded is 63 FPS, which occurs at 3840x2160 with Medium settings.
Q: Is the i5-9400 a bottleneck for the RTX 3080 Ti in this game?
A: At 1080p and 1440p, the CPU may limit performance due to its 6 threads, but at 4K, the GPU is the clear bottleneck, as the frame rates drop significantly regardless of CPU capability.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core i5-9400 has an average benchmark score of 2254. The Intel Core i7-1068NG7 scores 2259, which is 0.2% higher, making it a near-identical performer. The Intel Core i7-10710U scores 2248, 0.3% lower, and the AMD Ryzen 5 PRO 1500 scores 2246, 0.4% lower. The Intel Core i3-10305 scores 2264, 0.4% higher. These processors would deliver essentially the same level of performance in Fivem, as the differences are all within a fraction of a percent.
For the GPU, the NVIDIA GeForce RTX 3080 Ti has an average benchmark score of 41187. The AMD Radeon Pro 5300 scores 40870, which is 0.8% lower, indicating very similar performance. The NVIDIA Tesla M40 24 GB scores 41707, 1.2% higher, and the NVIDIA Tesla M40 scores 41897, 1.7% higher. The NVIDIA GeForce RTX 5070 scores 40377, 2% lower. These GPUs would produce comparable frame rates in Fivem, meaning that swapping the RTX 3080 Ti for any of these alternatives would not significantly alter the gaming experience.
Best Settings per Resolution
The database provides a clear recommendation for the most demanding preset that maintains an average of at least 60 FPS at each resolution. At 1920x1080, the best settings are Ultra, which produces an average of 127 FPS. This leaves substantial headroom, ensuring that even demanding scenes in Fivem will remain smooth.
At 2560x1440, the best settings are also Ultra, with an average of 84 FPS. This is comfortably above the 60 FPS threshold, allowing for maximum visual quality without sacrificing playability. The minimum FPS at this setting is not recorded, but the average suggests a stable experience.
At 3840x2160, the best settings are High, which achieves an average of exactly 60 FPS. This is the only preset at 4K that meets the playability requirement, and it does so with no margin. Players who want to use Medium settings will see an average of 75 FPS, which is safer, but High is the highest preset that remains playable. Ultra at 4K, with an average of 46 FPS, is not recommended for a smooth experience.