Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
213 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
148 FPS
Ultra 1440p Measured
73 FPS

4K (Ultra HD)

Low 4K Measured
82 FPS
Ultra 4K Measured
40 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 2,254
Graphics Card
Required 27,716
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 52 65 82
1440p QHD 73 93 117 148
1080p Full HD 110 142 177 213

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 213
1920x1080 Medium 177
1920x1080 Ultra 110
2560x1440 High 93
2560x1440 Low 148
2560x1440 Medium 117
2560x1440 Ultra 73
3840x2160 High 52
3840x2160 Low 82
3840x2160 Medium 65
3840x2160 Ultra 40

Performance Analysis: Fivem on Your System

The Intel Core i5-9400 paired with the NVIDIA GeForce RTX 3070 Ti delivers a broad range of frame rates in Fivem, depending on resolution and quality preset. Measured data covers three resolutions and four settings tiers, with average FPS values recorded for every combination. The lowest average observed is 40 FPS at 4K Ultra, while the highest reaches 213 FPS at 1080p Low. This spread indicates that the combo scales strongly with both resolution and graphical load.

Fivem is a multiplayer title, and the benchmark results reflect a mix of CPU and GPU sensitivity. At 1080p, the average FPS drops by 103 points when moving from Low to Ultra, showing that higher presets shift the workload heavily onto the graphics card. At 4K, the same preset change reduces average FPS by 42 points, meaning the GPU becomes the dominant limiter at higher pixel counts. The CPU, a six-core Coffee Lake part with a 2.90 GHz base and 4.10 GHz boost clock, provides enough throughput for high frame rates at lower resolutions, but the RTX 3070 Ti’s 21.75 TFLOPS of FP32 compute and 608.3 GB/s memory bandwidth determine how far the preset can be pushed before frame rates fall below playable thresholds.

Measured FPS Breakdown

At 3840x2160, the combo produces its lowest overall results. With the High preset, the average FPS is 52, which sits below the 60 FPS playable threshold. The Medium preset improves the average to 65 FPS, with recorded minimum and maximum values of 55 and 75 FPS respectively. Low settings raise the average to 82 FPS, while Ultra drops to 40 FPS, the worst figure in the entire dataset. No minimum or maximum values are recorded for High, Low, or Ultra at this resolution, so only the Medium preset provides frame time variability data.

Moving to 2560x1440, the picture improves substantially. Low settings average 148 FPS, Medium averages 117 FPS with a range from 99 to 134 FPS, High averages 93 FPS, and Ultra averages 73 FPS. Every preset at this resolution clears the 60 FPS threshold, with Ultra being the only one that stays relatively close to it. The gap between Low and Ultra is 75 FPS, which is narrower than the 103 FPS gap seen at 1080p. This suggests that at 1440p, the GPU is already becoming a more significant factor, but the CPU still has enough headroom to support high frame rates.

At 1920x1080, the combo shows its maximum performance. Low settings produce an average of 213 FPS, Medium averages 177 FPS with a minimum of 151 and maximum of 204 FPS, High averages 142 FPS, and Ultra averages 110 FPS. All presets far exceed the playable threshold, and even the minimum FPS at Medium, 151, is more than double the 60 FPS target. The 1080p results highlight the CPU’s role: with a boost clock of 4.10 GHz and six threads, the i5-9400 can feed the RTX 3070 Ti enough data to reach very high frame rates, but the scaling from Low to Ultra shows that the GPU still has a measurable impact on final output.

Comparing across resolutions, the data reveals a consistent pattern. At 1080p, the average FPS across all presets is roughly 160.5. At 1440p, that average drops to about 107.8. At 4K, the average falls to 59.8. This is a classic resolution scaling curve, where each step up in pixel count reduces the average by roughly 30 to 50 percent. The RTX 3070 Ti’s 8 GB of GDDR6X memory and 256-bit bus width are sufficient for Fivem at all tested resolutions, but the card’s raw compute becomes the bottleneck at 4K Ultra, where the average FPS drops to 40.

Best Settings per Resolution

For 3840x2160, the most demanding preset that maintains an average of at least 60 FPS is Medium. The recorded average at Medium is 65 FPS, with a minimum of 55 FPS. This means that while the average clears the threshold, occasional dips below 60 FPS are possible, but the overall experience remains playable. Low settings also clear the threshold at 82 FPS, but Medium is the highest preset that qualifies. High and Ultra do not qualify, with averages of 52 and 40 FPS respectively.

At 2560x1440, all four presets clear the 60 FPS threshold, so the best settings are Ultra. The average at Ultra is 73 FPS, which provides a comfortable margin above the playable threshold. High averages 93 FPS, Medium averages 117 FPS, and Low averages 148 FPS, but since Ultra is the most demanding preset and still exceeds 60 FPS, it is the recommended choice for maximum visual quality.

At 1920x1080, the same logic applies: all presets clear 60 FPS, and Ultra is the best setting with an average of 110 FPS. This leaves significant headroom, as even the minimum FPS at Medium, 151, is well above the threshold. For users prioritizing smoothness over visuals, Medium at 1080p would provide an average of 177 FPS, but Ultra is the highest preset that maintains playable performance with a wide margin.

FAQ

Q: Can this combo run Fivem at 4K with playable frame rates?

A: Yes, but only on Low or Medium settings. The average FPS at 4K Low is 82, and at 4K Medium it is 65. High and Ultra fall below the 60 FPS threshold, with averages of 52 and 40 FPS respectively.

Q: What is the highest preset that stays above 60 FPS at 1440p?

A: Ultra is the highest preset that clears the threshold, with an average FPS of 73. All other presets at 1440p also exceed 60 FPS, so the choice comes down to visual preference.

Q: How much performance is lost when moving from 1080p to 4K at the same preset?

A: At Medium settings, the average FPS drops from 177 at 1080p to 117 at 1440p, then to 65 at 4K. At Ultra, the averages are 110 at 1080p, 73 at 1440p, and 40 at 4K. The drop from 1080p to 4K is approximately 112 FPS at Medium and 70 FPS at Ultra.

Q: Does the combo ever drop below 60 FPS in the recorded data?

A: Yes, at 4K Medium the minimum FPS is 55, which is below the 60 FPS threshold. At 4K High and Ultra, the averages are 52 and 40 FPS, meaning frame rates are consistently below the threshold. At 1080p Medium, the minimum is 151 FPS, so no drops occur at lower resolutions.

Q: Is the CPU or GPU more responsible for the frame rate at 1080p?

A: The data suggests the CPU has more influence at 1080p, as the average FPS ranges from 110 to 213 across presets, indicating that the GPU is not fully saturated. The i5-9400’s six cores and 4.10 GHz boost clock provide enough throughput to drive high frame rates, but the scaling between presets shows that the GPU still matters.

Q: What is the best resolution for this combo if the goal is maximum visual quality?

A: At 1440p Ultra, the combo averages 73 FPS, which provides a good balance of visual quality and performance. At 4K, the best playable preset is Medium at 65 FPS, but the visual quality is lower than 1440p Ultra.

How This Combo Ranks

The combo ranks 1360 out of 3707 tested combinations in Fivem, placing it in the upper portion of the database. This percentile position indicates that the i5-9400 and RTX 3070 Ti together perform better than roughly 63 percent of all tested combos. The rank reflects the fact that the GPU is a high-end part, while the CPU is a mid-range part from an earlier generation.

The RTX 3070 Ti alone sits in the 75th percentile among all GPUs, with an average benchmark score of 29945. The i5-9400, by contrast, sits in the 47th percentile among all CPUs, with an average benchmark score of 2254. This combination of a strong GPU and a mid-range CPU means that in Fivem, the CPU may limit performance at lower resolutions, but the overall rank benefits from the GPU’s strength at higher resolutions.

At 4K, the combo’s rank is likely driven by the GPU, since the RTX 3070 Ti’s 21.75 TFLOPS of FP32 compute and 608.3 GB/s bandwidth are the primary factors in determining frame rates. At 1080p, the CPU’s single-thread performance, as indicated by a Geekbench single-core score of 1389, becomes more relevant, and the rank may be slightly lower relative to combos with faster CPUs. However, the measured FPS data shows that even at 1080p Ultra, the combo averages 110 FPS, which is well above the playable threshold.

Similar Performance Alternatives

The nearest rivals for the i5-9400 provide a reference for how other CPUs might behave in this combo. The Intel Core i7-1068NG7 has an average score of 2259, which is 0.2 percent higher than the i5-9400’s 2254. The Intel Core i3-10305 scores 2264, 0.4 percent higher. The Intel Core i7-10710U scores 2248, 0.3 percent lower, and the AMD Ryzen 5 PRO 1500 scores 2246, 0.4 percent lower. These differences are minimal, so swapping the i5-9400 for any of these CPUs would likely result in very similar frame rates in Fivem.

For the GPU, the nearest rivals are all within a narrow band. The NVIDIA GeForce RTX 5070 Mobile scores 29928, 0.1 percent lower than the RTX 3070 Ti’s 29945. The AMD Radeon RX 6800 scores 30095, 0.5 percent higher. The NVIDIA GeForce RTX 2080 Ti scores 29783, 0.5 percent lower, and the AMD Radeon RX 6700 scores 30433, 1.6 percent higher. These deltas are small, meaning any of these GPUs paired with the i5-9400 would produce nearly identical performance in Fivem.

If a user were to build a system with the i5-9400 and one of these alternative GPUs, the measured FPS would likely be within a few frames of the RTX 3070 Ti results. The RTX 2080 Ti, for example, has a slightly lower average score, so it might produce a few FPS less at 4K Ultra, but the difference would be negligible. The RX 6800’s higher score suggests it could edge out the RTX 3070 Ti by a small margin, but again, the practical difference in Fivem would be minor.

The Verdict

The data shows that this combo can run Fivem playably at all three tested resolutions, but the settings ceiling varies. At 1920x1080, all presets clear 60 FPS, with Ultra averaging 110 FPS. This is the most comfortable experience, with a wide margin above the playable threshold. At 2560x1440, all presets also clear 60 FPS, with Ultra averaging 73 FPS. This is still a solid experience, though the margin is smaller.

At 3840x2160, only Low and Medium clear the 60 FPS threshold, with averages of 82 and 65 FPS respectively. Medium is the highest playable preset, but its minimum FPS of 55 means there will be occasional dips below 60. High and Ultra are not playable, with averages of 52 and 40 FPS. For users with a 4K display, the recommendation is to use Medium settings for the best balance of visual quality and performance, or Low if frame rate consistency is more important.

Overall, the verdict is positive. The combo is capable of delivering a smooth experience at 1080p and 1440p across all presets, and at 4K with reduced settings. The RTX 3070 Ti’s strong performance, evidenced by its 75th percentile GPU ranking, carries the system at higher resolutions, while the i5-9400’s six cores and 4.10 GHz boost clock provide sufficient CPU performance for multiplayer scenarios.

CPU and GPU Roles

The division of labor between the i5-9400 and the RTX 3070 Ti changes with resolution. At 1080p, the CPU has a larger relative impact. The average FPS ranges from 213 at Low to 110 at Ultra, a spread of 103 FPS. This wide range indicates that the GPU is not the primary limiter; if it were, the frame rates would be more consistent across presets. Instead, the CPU’s ability to feed the GPU becomes the bottleneck, especially at lower presets where the GPU has less work to do. The i5-9400’s single-core performance, as measured by a Cinebench R23 single-core score of 935, is adequate for high frame rates, but it caps the maximum FPS below what the RTX 3070 Ti could theoretically deliver.

At 1440p, the balance shifts. The average FPS ranges from 148 at Low to 73 at Ultra, a spread of 75 FPS. The narrower spread suggests that the GPU is becoming more involved, but the CPU still has enough headroom to support frame rates above 100 FPS at lower presets. The RTX 3070 Ti’s 8 GB of GDDR6X memory and 256-bit bus width are well-suited to 1440p, and the card’s 21.75 TFLOPS of compute provides ample power for the higher pixel count.

At 4K, the GPU becomes the dominant factor. The average FPS ranges from 82 at Low to 40 at Ultra, a spread of 42 FPS. This is the smallest spread across all resolutions, indicating that the GPU is nearly always the limiting component. The CPU’s role diminishes because the GPU is working so hard to render each frame that the CPU has spare capacity. The RTX 3070 Ti’s 608.3 GB/s memory bandwidth and 169.9 GPixel/s pixel rate are the key specs driving performance at this resolution, and the data shows that the card can handle 4K Medium at 65 FPS but struggles with Ultra at 40 FPS.

In summary, the i5-9400 matters most at 1080p, where it limits the maximum frame rate. The RTX 3070 Ti matters most at 4K, where its compute and memory bandwidth determine whether the game stays playable. At 1440p, both components contribute meaningfully, with the CPU supporting high frame rates at lower presets and the GPU taking over as the preset increases. This is a typical pattern for a mid-range CPU paired with a high-end GPU, and the measured FPS data reflects that dynamic clearly.