Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

88%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
250 FPS
Ultra 1080p Measured
122 FPS

1440p (2K / QHD)

Low 1440p Measured
164 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
91 FPS
Ultra 4K Measured
45 FPS
6.4ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 49,394
Graphics Card
Required 27,716
Your GPU 23,172

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 58 72 91
1440p QHD 80 104 130 164
1080p Full HD 122 157 197 250

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 157
1920x1080 Low 250
1920x1080 Medium 197
1920x1080 Ultra 122
2560x1440 High 104
2560x1440 Low 164
2560x1440 Medium 130
2560x1440 Ultra 80
3840x2160 High 58
3840x2160 Low 91
3840x2160 Medium 72
3840x2160 Ultra 45

Performance Analysis: Fivem on Your System

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 3080 delivers a strong showing in Fivem, but the data reveals a sharp performance cliff as resolution climbs. At 1920x1080, the combo is overwhelmingly fast, yet at 3840x2160, it only barely misses the 60 FPS mark on High settings. The measured results show this is a system built for high-refresh 1440p gaming, with 2160p requiring a settings compromise to stay fluid.

Measured FPS Breakdown

The measured FPS data for this combo covers four presets across three resolutions. At 1920x1080, the performance is exceptional. Low settings produce an average of 250 FPS, which is the highest figure recorded for this pairing. Medium settings yield 197 FPS on average, with a minimum of 167 FPS and a maximum of 226 FPS. High settings drop to 157 FPS average, while Ultra still maintains a robust 122 FPS average. None of the 1080p entries report minimum or maximum values for Low, High, or Ultra, but the Medium preset’s frame time data suggests consistency.

Moving to 2560x1440, the averages remain well above any playability concern. Low settings average 164 FPS. Medium settings average 130 FPS, with a minimum of 110 FPS and a maximum of 149 FPS. High settings average 104 FPS, and Ultra settings average 80 FPS. The gap between Medium and Ultra here is 50 FPS, which is a substantial jump in demand. The 1440p data shows a clear linear degradation as settings increase, but even the most demanding preset stays comfortably ahead of 60 FPS.

At 3840x2160, the picture changes dramatically. Low settings average 91 FPS, which is still excellent for 4K. Medium settings average 72 FPS, with a minimum of 61 FPS and a maximum of 83 FPS — the minimum is barely above the 60 FPS threshold. High settings fall to an average of 58 FPS, which dips below the playable threshold. Ultra settings average just 45 FPS. The 4K results show a steep drop-off between Medium and High, indicating that the RTX 3080’s 10 GB frame buffer and memory bandwidth are reaching their limits with the higher preset.

CPU and GPU Roles

The benchmark results indicate that the GPU becomes the primary bottleneck at 3840x2160, while the CPU’s headroom is more apparent at lower resolutions. The scaling from 1080p to 1440p shows a consistent reduction in FPS across all presets: Low drops from 250 to 164 FPS (a 34% reduction), Medium from 197 to 130 FPS (34%), High from 157 to 104 FPS (34%), and Ultra from 122 to 80 FPS (34%). This uniform scaling suggests that the workload is scaling proportionally with pixel count, which points to the GPU being the limiting factor even at 1440p.

The shift from 1440p to 2160p is less uniform. Low settings drop from 164 to 91 FPS (45% reduction), Medium from 130 to 72 FPS (45%), High from 104 to 58 FPS (44%), and Ultra from 80 to 45 FPS (44%). The similar percentage drops across all presets indicate that the GPU is consistently the constraint at 4K. However, the fact that the CPU is a Core i5-14600KF with 14 cores and 20 threads, scoring 32544 in Cinebench R23 multicore, suggests it is not the limiting factor here. The CPU’s single-core score of 4594 in Cinebench R23 is also high, which matters for Fivem’s multiplayer simulation logic.

At 1080p, the CPU’s role becomes more significant. The jump from 157 FPS at High to 250 FPS at Low shows that the GPU has ample headroom when the CPU is not heavily taxed. The data suggests that at 1080p, the i5-14600KF can feed the RTX 3080 sufficiently, as evidenced by the 250 FPS ceiling on Low. The 34% scaling between 1080p and 1440p is consistent with GPU-bound behavior, but the absolute numbers at 1080p indicate the CPU is keeping pace.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 122 FPS. This means a user can max out the game at 1080p and still have substantial headroom. The data shows no preset at this resolution falls below the playable threshold.

At 2560x1440, the best settings are also Ultra, averaging 80 FPS. This is 20 FPS above the 60 FPS threshold, providing a comfortable margin. The 1440p Ultra result is 42 FPS lower than the 1080p Ultra result, which reflects the increased pixel load.

For 3840x2160, the most demanding preset that maintains 60 FPS is Medium, with an average of 72 FPS. The minimum of 61 FPS confirms that even the worst frame times stay above the threshold. High settings at 4K average 58 FPS, which is a miss. The data indicates that 4K Ultra is not viable, averaging 45 FPS. This makes Medium the ceiling for smooth 4K play, and users who want higher quality will need to accept frame rates below 60.

FAQ

Q: Can this PC run Fivem at 4K Ultra settings?

A: No. The measured average FPS at 3840x2160 Ultra is 45 FPS, which is well below the 60 FPS playable threshold. The 4K High preset also misses the threshold at 58 FPS.

Q: What is the best settings preset for 1440p?

A: Ultra settings at 2560x1440 average 80 FPS, making it the most demanding preset that clears the 60 FPS threshold. All four presets at this resolution are playable.

Q: How much performance is lost between Medium and Ultra at 1080p?

A: Medium averages 197 FPS, while Ultra averages 122 FPS. That is a 75 FPS difference, or roughly 38% lower performance on Ultra.

Q: Is the RTX 3080 the limiting factor at 4K?

A: The data shows a 44-45% FPS drop from 1440p to 2160p across all presets, which is consistent with a GPU-bound workload. The CPU’s high single-core score (4594 in Cinebench R23) suggests it is not the bottleneck at this resolution.

Q: What is the minimum FPS recorded for this combo?

A: The lowest minimum FPS reported is 61 FPS, which occurs at 3840x2160 Medium settings. The 2560x1440 Medium preset has a minimum of 110 FPS, and the 1920x1080 Medium preset has a minimum of 167 FPS.

Q: Does the combo rank high among tested configurations?

A: The combo ranks 1048 out of 3707 tested combos, placing it in the 72nd percentile of the database. This is a strong ranking, though not elite.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the AMD Ryzen 9 7900 scores 49228 on average, which is just 0.3% lower than the i5-14600KF’s 49394 average benchmark score. The AMD Ryzen 7 PRO 5755G is 0.4% lower at 49196, and the Intel Core Ultra 5 245 is 0.8% lower at 48995. On the higher side, the AMD Ryzen AI Max+ 388 scores 49796, which is 0.8% faster. These deltas are all under 1%, meaning any of these CPUs would deliver nearly identical frame rates in Fivem when paired with the same GPU.

For the GPU, the nearest rivals are surprising. The NVIDIA P106-100 has an average score of 23249, which is 0.3% lower than the RTX 3080’s 23172. The AMD Radeon Pro Vega 16 scores 23250 (0.3% lower), the AMD Radeon RX 6600M scores 23273 (0.4% lower), and the AMD Radeon R9 M290X scores 23276 (0.4% lower). These are all within 0.4% of the RTX 3080’s average benchmark score, which is a remarkably tight grouping. In practice, swapping the RTX 3080 for any of these GPUs would yield nearly identical FPS in Fivem, though the RTX 3080’s specific features like ray tracing cores and 10 GB of GDDR6X memory may not be fully reflected in these synthetic averages.

How This Combo Ranks

The combo’s rank in Fivem is 1048 out of 3707 tested combinations. This places it in the 72nd percentile of all tested combos, meaning it outperforms roughly 72% of the configurations in the database. The rank reflects the balance between the i5-14600KF’s strong multi-threaded performance (32544 in Cinebench R23 multicore) and the RTX 3080’s capable rasterization (25086 in Passmark G3D). The data shows that while this is not a top-tier 4K rig, it is a very strong 1440p performer. The rank also indicates that in the broader context of all combos, this pairing is well above average, but there are 2659 combos that perform better. The gap between rank 1048 and the top 1% suggests that for users targeting 4K Ultra, a more powerful GPU would be needed.

The Verdict

The verdict by resolution is clear. At 1920x1080, the i5-14600KF + RTX 3080 runs Fivem flawlessly, with all presets clearing 60 FPS. The best settings are Ultra at 122 FPS average. At 2560x1440, the same is true — all presets are playable, with Ultra averaging 80 FPS. At 3840x2160, the system can only guarantee 60 FPS on Low (91 FPS) and Medium (72 FPS). High settings average 58 FPS, which is below the threshold, and Ultra is not playable at 45 FPS.

This PC can run Fivem, but the experience depends heavily on the target resolution. For 1080p and 1440p users, the system offers maximum settings with high frame rates, making it an excellent choice for high-refresh monitors. For 4K users, the system requires a compromise on settings — Medium is the ceiling for smooth play, and users who insist on High or Ultra will need to accept frame rates in the 45-58 FPS range. The data indicates that the RTX 3080’s 10 GB memory and 760.3 GB/s bandwidth are sufficient for 1440p Ultra but not for 4K High. The i5-14600KF’s performance is never the limiting factor in this pairing, as evidenced by the consistent GPU-bound scaling across resolutions. Ultimately, this combo is a strong 1440p machine that can handle 4K with reduced settings, but it does not have the headroom for 4K Ultra in Fivem.