Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
224 FPS
Ultra 1080p Measured
150 FPS

1440p (2K / QHD)

Low 1440p Measured
195 FPS
Ultra 1440p Measured
98 FPS

4K (Ultra HD)

Low 4K Measured
112 FPS
Ultra 4K Measured
55 FPS
5.3ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 14,185
Graphics Card
Required 27,716
Your GPU 44,795

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 70 88 112
1440p QHD 98 127 159 195
1080p Full HD 150 190 205 224

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 190
1920x1080 Low 224
1920x1080 Medium 205
1920x1080 Ultra 150
2560x1440 High 127
2560x1440 Low 195
2560x1440 Medium 159
2560x1440 Ultra 98
3840x2160 High 70
3840x2160 Low 112
3840x2160 Medium 88
3840x2160 Ultra 55

Performance Analysis: Fivem on Your System

Best Settings per Resolution

At 4K (3840x2160), the most demanding preset that stays at or above 60 FPS is High, which delivers an average of 70 FPS. Pushing to Ultra drops the average to 55 FPS, which falls below the playable threshold of 60 FPS. Medium sits comfortably at 88 FPS, and Low reaches 112 FPS, but High is the highest quality option that remains playable.

At 1440p (2560x1440), the system can handle the Ultra preset with an average of 98 FPS. This is the most demanding preset available, and it clears the 60 FPS bar with a solid margin. High runs at 127 FPS, Medium at 159 FPS, and Low at 195 FPS, but none of those are needed since Ultra is fully playable.

At 1080p (1920x1080), the Ultra preset delivers an average of 150 FPS, well above the 60 FPS threshold. The data shows that every preset, from Low at 224 FPS to Medium at 205 FPS and High at 190 FPS, is playable at this resolution. Ultra is the best choice for maximum visual quality without sacrificing smoothness.

The pattern is clear: as resolution increases, the headroom above 60 FPS shrinks. At 4K, the GPU is the limiting factor, capping playable settings at High. At 1440p and 1080p, the system has enough performance to max out the game completely.

CPU and GPU Roles

The measured FPS data reveals how the balance shifts between the Intel Core i5-10400F and the NVIDIA GeForce RTX 4070 Ti across resolutions.

At 1080p, the CPU plays a larger role relative to the GPU. The gap between Low (224 FPS) and Ultra (150 FPS) is 74 FPS, which shows that the GPU still has headroom but the CPU begins to constrain frame rates at lower resolutions. The i5-10400F, with its 6 cores and 12 threads, has enough single-thread performance to feed the RTX 4070 Ti at these high frame rates, but the scaling from Low to Ultra suggests the GPU is not the only factor.

At 1440p, the GPU becomes more dominant. The spread from Low (195 FPS) to Ultra (98 FPS) is 97 FPS, a wider range than at 1080p. This indicates that the RTX 4070 Ti is doing more of the heavy lifting as pixel count increases, while the CPU still keeps up. The system maintains playable frame rates at all presets, which points to a balanced pairing at this resolution.

At 4K, the GPU is clearly the bottleneck. The difference between Low (112 FPS) and Ultra (55 FPS) is 57 FPS, and the system cannot maintain 60 FPS at Ultra. The i5-10400F has enough processing power to handle the game logic, but the RTX 4070 Ti's workload at 3840x2160 becomes too heavy for the highest preset. The fact that Medium (88 FPS) and High (70 FPS) remain playable, while Ultra drops below the threshold, shows that the GPU is the determining factor.

Benchmark results indicate that the CPU's role diminishes as resolution rises. At 1080p, the CPU can limit maximum frame rates; at 4K, the GPU dictates whether a preset is playable. For this game, the i5-10400F is sufficient at all resolutions, but the RTX 4070 Ti's performance ceiling at 4K Ultra is the main constraint.

Measured FPS Breakdown

The database records the following average frame rates for this combo. Minimum and maximum values are only available for Medium presets.

3840x2160 (4K)

  • Low: average 112 FPS, no min/max recorded
  • Medium: average 88 FPS, minimum 75 FPS, maximum 101 FPS
  • High: average 70 FPS, no min/max recorded
  • Ultra: average 55 FPS, no min/max recorded

At 4K, the Medium preset shows a minimum of 75 FPS, which is above the 60 FPS threshold. The High preset's average of 70 FPS leaves some margin, but the Ultra preset's 55 FPS average indicates it cannot sustain playable performance.

2560x1440 (1440p)

  • Low: average 195 FPS, no min/max recorded
  • Medium: average 159 FPS, minimum 135 FPS, maximum 182 FPS
  • High: average 127 FPS, no min/max recorded
  • Ultra: average 98 FPS, no min/max recorded

At 1440p, even the Ultra preset's 98 FPS average provides substantial headroom. The Medium preset's minimum of 135 FPS is far above the playable threshold, so there is no risk of dipping below 60 FPS at any recorded setting.

1920x1080 (1080p)

  • Low: average 224 FPS, no min/max recorded
  • Medium: average 205 FPS, minimum 175 FPS, maximum 236 FPS
  • High: average 190 FPS, no min/max recorded
  • Ultra: average 150 FPS, no min/max recorded

At 1080p, the Medium preset's minimum of 175 FPS is higher than the 4K Ultra average. The Ultra preset runs at 150 FPS, which is more than double the playable threshold. The recorded data shows no preset at 1080p comes close to failing the 60 FPS requirement.

The scaling between resolutions is consistent: dropping from 4K to 1440p roughly doubles frame rates at each preset, and dropping from 1440p to 1080p adds another significant boost. The RTX 4070 Ti's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are sufficient for all tested settings.

FAQ

Q: Can this system run Fivem at 4K with maximum settings?

A: No. At 3840x2160 with Ultra settings, the average FPS is 55, which is below the 60 FPS playable threshold. The highest playable preset at 4K is High, with an average of 70 FPS.

Q: What is the best preset at 1440p for this combo?

A: Ultra is fully playable at 2560x1440, delivering an average of 98 FPS. Since this is the most demanding preset available, it is the recommended choice for this resolution.

Q: How much performance does the system lose going from 1080p to 4K on High settings?

A: At 1080p High, the average is 190 FPS. At 4K High, the average drops to 70 FPS. That is a reduction of 120 FPS, or roughly 63% of the 1080p performance.

Q: Is the RTX 4070 Ti the limiting factor at 4K Ultra?

A: The data suggests yes. At 4K, the GPU workload increases enough that Ultra drops to 55 FPS average, while the CPU still maintains playable frame rates at lower presets. The CPU's performance is not the constraint at this resolution.

Q: What is the lowest average FPS recorded at 1080p?

A: The lowest average at 1920x1080 is 150 FPS at Ultra settings. The minimum recorded frame rate at 1080p is 175 FPS on Medium, so no preset approaches the 60 FPS threshold.

Q: How does the Medium preset's minimum FPS compare across resolutions?

A: At 4K Medium, the minimum is 75 FPS. At 1440p Medium, the minimum is 135 FPS. At 1080p Medium, the minimum is 175 FPS. All three are above the 60 FPS playable threshold.

The Verdict

This PC can run Fivem, and it does so with strong results at most settings. The verdict by resolution is clear:

At 3840x2160, the playable settings are High, Low, and Medium. The best setting is High with an average of 70 FPS. Ultra is not playable, as it averages 55 FPS, below the 60 FPS threshold.

At 2560x1440, all settings are playable. The best setting is Ultra with an average of 98 FPS. Even the most demanding preset clears the threshold with a 38 FPS margin.

At 1920x1080, all settings are playable. The best setting is Ultra with an average of 150 FPS. There is no scenario at this resolution where the system struggles.

The Intel Core i5-10400F pairs well with the RTX 4070 Ti for this game. The CPU's 12 threads and 12 MB of shared L3 cache are enough to handle the multiplayer workload, while the GPU provides the bulk of the rendering power. The only limitation is 4K Ultra, where the GPU's performance ceiling becomes apparent.

For a 60 FPS target, the system is playable at 4K High, 1440p Ultra, and 1080p Ultra. If the goal is maximum visual quality at 4K, the Ultra preset is not viable, but the drop to High is minor and keeps the experience smooth.

How This Combo Ranks

In the database's tested combinations for Fivem, this CPU and GPU pairing ranks 669th out of 3707 combos. That places it in the top 18% of all tested systems, which is a strong result for a mid-range processor paired with a high-end graphics card.

The RTX 4070 Ti is the dominant contributor to this ranking. Its percentile of 84 among all GPUs puts it well above the median, while the i5-10400F sits at the 68th percentile among CPUs. The GPU's benchmark scores, including a Passmark G3D score of 31624 and a 3DMark Steel Nomad DX12 score of 5024, drive the combo's overall position.

The CPU's nearest rivals in the database include the Intel Xeon 6756E, which scores 0.2% higher, and the AMD EPYC 7552, which scores 0.5% higher. On the GPU side, the RTX 4070 Ti is within 1.6% of the NVIDIA RTX A6000 and trails the RTX 5090 Mobile by 0.8%. These close margins show that the combo's ranking is competitive with systems built around similar or more expensive hardware.

The ranking of 669 out of 3707 reflects a system that can handle Fivem at high frame rates across most resolutions. The 4K Ultra limitation prevents a higher ranking, but the overall position is solid for a 10th-gen Intel CPU paired with an Ada Lovelace GPU. The data indicates that this combination is well above average for the game, with the GPU carrying most of the weight in demanding scenarios.