Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
224 FPS
Ultra 1080p Measured
110 FPS

1440p (2K / QHD)

Low 1440p Measured
148 FPS
Ultra 1440p Measured
73 FPS

4K (Ultra HD)

Low 4K Measured
82 FPS
Ultra 4K Measured
40 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 14,185
Graphics Card
Required 27,716
Your GPU 29,945

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 52 65 82
1440p QHD 73 93 117 148
1080p Full HD 110 142 177 224

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 224
1920x1080 Medium 177
1920x1080 Ultra 110
2560x1440 High 93
2560x1440 Low 148
2560x1440 Medium 117
2560x1440 Ultra 73
3840x2160 High 52
3840x2160 Low 82
3840x2160 Medium 65
3840x2160 Ultra 40

Performance Analysis: Fivem on Your System

The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 3070 Ti is a combination that sits in the middle of the database’s tested configurations for Fivem. With a combo rank of 1345 out of 3707 tested combos, this pairing places it in the 64th percentile of all recorded systems, meaning it outperforms a clear majority of setups while still leaving headroom above it. The benchmark data shows a system that is far more capable than the minimum requirements for smooth play, but the results are nuanced by resolution and preset choices, as the GPU and CPU take on different levels of responsibility depending on the load.

How This Combo Ranks

The recorded data places this combination at rank 1345 out of 3707 total tested combos for Fivem. That puts it roughly in the top 36 percent of all systems in the database, a solid position for a mid-generation CPU paired with a high-end GPU. The ranking reflects the balance between the Intel Core i5-10400F’s six cores and twelve threads and the RTX 3070 Ti’s substantial graphics throughput. It is not a top-tier pairing, but it is comfortably above the median, and the measured FPS numbers confirm that the system handles the game well across most settings.

The CPU itself sits at the 68th percentile against all CPUs in the database, with an average benchmark score of 14185. Its nearest rivals in the database include the Intel Xeon 6756E at 14163 (0.2 percent slower), the Intel Core 7 160UL at 14232 (0.3 percent faster), the AMD EPYC 7552 at 14115 (0.5 percent slower), and the AMD Ryzen 3 7320C at 14277 (0.6 percent faster). These are all within a one percent band, so the i5-10400F is effectively tied with several very different processors in raw synthetic benchmarks, though its real-world gaming behavior is shaped by its architecture and thread layout.

The GPU is the stronger half of this pairing. The RTX 3070 Ti sits at the 75th percentile against all GPUs, with an average benchmark score of 29945. Its nearest rivals are the NVIDIA GeForce RTX 5070 Mobile at 29928 (0.1 percent slower), the AMD Radeon RX 6800 at 30095 (0.5 percent faster), the NVIDIA GeForce RTX 2080 Ti at 29783 (0.5 percent slower), and the AMD Radeon RX 6700 at 30433 (1.6 percent faster). The RTX 3070 Ti is essentially performance-equivalent to these four cards in the database’s aggregate GPU metric, which is useful context when considering alternative GPUs that would produce similar FPS in Fivem.

CPU and GPU Roles

The scaling between resolutions and presets reveals how the balance of work shifts. At 1920x1080, the CPU has more influence relative to the GPU because the graphics load is lower. The average FPS at Low settings is 224, which is a massive number that no display can fully utilize, but it also shows that the CPU is not a bottleneck at this resolution. Dropping from Low to Medium reduces the average to 177, a 21 percent decrease, and then to 142 at High, another 20 percent drop. The Ultra preset still manages 110 FPS. The pattern at 1080p is that the GPU is handling the preset scaling, but the CPU has enough single-thread and multi-thread headroom to keep feeding the graphics card.

At 2560x1440, the GPU begins to take on a larger share of the work. The Low preset averages 148 FPS, which is still very high. Medium drops to 117 FPS, High to 93 FPS, and Ultra to 73 FPS. The percentage drop from Low to Ultra is about 51 percent, compared to a 51 percent drop at 1080p from Low to Ultra as well. The resolution increase from 1080p to 1440p at the same preset costs roughly 34 percent of the FPS at Low (224 to 148), 34 percent at Medium (177 to 117), 35 percent at High (142 to 93), and 34 percent at Ultra (110 to 73). This consistent scaling indicates that the GPU is the dominant factor at 1440p, with the CPU still providing enough throughput.

At 3840x2160, the GPU is clearly the limiting component. The Low preset averages 82 FPS, Medium drops to 65 FPS, High to 52 FPS, and Ultra to 40 FPS. The jump from 1440p to 4K at the same preset costs about 45 percent of the FPS at Low (148 to 82), 44 percent at Medium (117 to 65), 44 percent at High (93 to 52), and 45 percent at Ultra (73 to 40). The RTX 3070 Ti’s 8 GB of GDDR6X memory and 608.3 GB/s bandwidth are being pushed hard at 4K, and the CPU’s role diminishes further. The data shows that the i5-10400F is sufficient at every resolution, but the RTX 3070 Ti determines whether the frame rate stays above 60 FPS.

Measured FPS Breakdown

At 1920x1080, the recorded averages are 224 FPS on Low, 177 FPS on Medium with a minimum of 151 and a maximum of 204, 142 FPS on High, and 110 FPS on Ultra. The Medium preset is the only one with a full min/max range recorded, and that minimum of 151 FPS is well above the playable threshold of 60 FPS. Every preset at 1080p clears 60 FPS with massive headroom, making this resolution the most comfortable for the combo.

At 2560x1440, the averages are 148 FPS on Low, 117 FPS on Medium with a minimum of 99 and a maximum of 134, 93 FPS on High, and 73 FPS on Ultra. The Medium minimum of 99 FPS is still far above the 60 FPS threshold. The Ultra preset at 73 FPS is the lowest average at 1440p, but it remains playable. The scaling from Low to Ultra is smooth, with no sudden collapses, which points to a stable combination of CPU and GPU.

At 3840x2160, the averages are 82 FPS on Low, 65 FPS on Medium with a minimum of 55 and a maximum of 75, 52 FPS on High, and 40 FPS on Ultra. The Medium preset is the only one at 4K with a recorded minimum, and that minimum is 55 FPS, which is below the 60 FPS threshold even though the average is 65 FPS. This indicates that while the average is playable, there are dips that could be noticeable in busy multiplayer scenes. The High preset at 52 FPS and Ultra at 40 FPS are below the playable threshold, so those settings are not recommended at 4K.

FAQ

Q: Can this combo run Fivem at 1920x1080 with high settings?

A: Yes. The recorded average FPS at 1080p High is 142, which is more than double the 60 FPS playable threshold. The Ultra preset also clears the threshold with an average of 110 FPS.

Q: What is the best preset at 2560x1440 for this system?

A: The Ultra preset is playable at 1440p with an average of 73 FPS. This is the most demanding preset that stays above 60 FPS at this resolution, so it is the best choice for maximum visual quality.

Q: Does the RTX 3070 Ti bottleneck at 4K in Fivem?

A: The data shows that the GPU becomes the limiting factor at 3840x2160. The High preset averages 52 FPS and Ultra averages 40 FPS, both below the 60 FPS threshold. The Medium preset averages 65 FPS but has a recorded minimum of 55 FPS, so it is the only playable preset above 60 FPS on average.

Q: How does the i5-10400F compare to its nearest rivals in synthetic benchmarks?

A: The i5-10400F has an average benchmark score of 14185. Its nearest rivals are the Intel Xeon 6756E at 14163 (0.2 percent slower), the Intel Core 7 160UL at 14232 (0.3 percent faster), the AMD EPYC 7552 at 14115 (0.5 percent slower), and the AMD Ryzen 3 7320C at 14277 (0.6 percent faster). All are within one percent of each other.

Q: What GPU alternatives would perform similarly to the RTX 3070 Ti?

A: The RTX 3070 Ti has an average benchmark score of 29945. The NVIDIA GeForce RTX 5070 Mobile (29928, 0.1 percent slower), AMD Radeon RX 6800 (30095, 0.5 percent faster), NVIDIA GeForce RTX 2080 Ti (29783, 0.5 percent slower), and AMD Radeon RX 6700 (30433, 1.6 percent faster) are all within a narrow band of performance.

Q: Is the 4K Low preset playable?

A: Yes. The 4K Low preset averages 82 FPS, which is above the 60 FPS threshold. However, the Medium preset at 65 FPS is the highest settings level that maintains an average above 60 FPS at 4K.

Best Settings per Resolution

At 1920x1080, the best settings are Ultra, which delivers an average of 110 FPS. This is the most demanding preset and it stays well above the 60 FPS threshold, so there is no reason to lower settings at this resolution.

At 2560x1440, the best settings are also Ultra, with an average of 73 FPS. This is above the 60 FPS threshold, and the recorded data shows no min/max values that would suggest problematic dips.

At 3840x2160, the best settings are Medium, with an average of 65 FPS. The recorded minimum for Medium at 4K is 55 FPS, so while the average is above 60 FPS, there is some variance. The Low preset averages 82 FPS and is a safer choice if frame consistency is a priority, but Medium offers the highest average that remains above the threshold.

The Verdict

The data shows that this PC can run Fivem at all three tested resolutions, but not at every preset. At 1920x1080, all four presets clear 60 FPS, with Ultra at 110 FPS being the most demanding playable option. At 2560x1440, all four presets also clear 60 FPS, with Ultra at 73 FPS as the top playable setting. At 3840x2160, only Low and Medium are playable according to the verdict data, with Medium at 65 FPS being the best setting. The High preset at 52 FPS and Ultra at 40 FPS fall short of the 60 FPS playable threshold.

The i5-10400F is not the limiting factor in this configuration. The CPU’s 6 cores and 12 threads, with a boost clock of 4.30 GHz, provide enough performance for Fivem’s multiplayer workloads. The RTX 3070 Ti is the component that determines the playable envelope, and its 8 GB of memory and 608.3 GB/s bandwidth are sufficient for 1080p and 1440p at maximum settings, but 4K requires a reduction to Medium or lower.

Similar Performance Alternatives

For the CPU, the Intel Core i5-10400F’s nearest rivals in the database are the Intel Xeon 6756E, Intel Core 7 160UL, AMD EPYC 7552, and AMD Ryzen 3 7320C. All four have average benchmark scores within 0.6 percent of the i5-10400F’s 14185. In practice, swapping the i5-10400F for any of these would produce nearly identical CPU-bound behavior in Fivem, though the database does not record per-component game FPS, only the aggregate combo results.

For the GPU, the RTX 3070 Ti’s nearest rivals are the NVIDIA GeForce RTX 5070 Mobile, AMD Radeon RX 6800, NVIDIA GeForce RTX 2080 Ti, and AMD Radeon RX 6700. The RTX 5070 Mobile is 0.1 percent slower, the RX 6800 is 0.5 percent faster, the RTX 2080 Ti is 0.5 percent slower, and the RX 6700 is 1.6 percent faster. Choosing any of these GPUs alongside the i5-10400F would yield FPS numbers in Fivem that are very close to the ones recorded for the RTX 3070 Ti, with the RX 6700 being the slightly faster option and the RTX 5070 Mobile being the slightly slower one. The overall combo ranking would shift only marginally, since the GPU scores are all within a 2.2 percent band.

The practical takeaway is that this pairing is a balanced mid-to-high-end system for Fivem. It excels at 1080p and 1440p, handles 4K only at reduced settings, and sits comfortably in the upper half of all tested combos. The CPU has enough thread capacity for the game’s multiplayer server load, and the GPU provides the raw throughput needed for higher resolutions. Players targeting 60 FPS should stick to 1080p or 1440p for maximum visual fidelity, or accept Medium settings at 4K.