Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 31 | 39 | 49 |
| 1440p QHD | 44 | 56 | 65 | 87 |
| 1080p Full HD | 66 | 85 | 104 | 133 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The Intel Core i5-10400F paired with the NVIDIA GeForce GTX 1070 is a well-matched duo for Fivem, but the data shows it is not a top-tier combination. In the database, this combo ranks 3043 out of 3707 tested combinations, placing it in the lower portion of the overall rankings. This ranking is heavily influenced by the GPU, which sits at the 47th percentile among all tested graphics cards, meaning more than half of the GPUs in the database outperform it. The CPU, by contrast, is a stronger performer, ranking at the 68th percentile among all CPUs, which suggests that the graphics card is the limiting factor in this pairing. For a multiplayer title like Fivem, which can be sensitive to both CPU and GPU loads, this imbalance means the system will deliver playable performance at standard resolutions, but it will struggle to maintain high frame rates at 4K.
How This Combo Ranks
The recorded measurements place this CPU and GPU combination at rank 3043 out of 3707 tested combos, which is a percentile position that reflects its mid-range hardware makeup. The GTX 1070, with an average benchmark score of 9780, is the weaker link in this pairing, and its 47th percentile standing among all GPUs confirms that it is an older, mid-range part by current standards. The Core i5-10400F, however, performs far better relative to its peers, with an average benchmark score of 14185 and a 68th percentile ranking, indicating that the processor has ample headroom for more demanding graphics cards.
This disparity is critical for understanding the combo's overall rank. The CPU is capable of feeding a faster GPU, but the GTX 1070 cannot fully utilize the processor's potential in graphically intense scenarios. The result is a system that ranks in the 82nd percentile from the bottom, or put differently, it is not among the top-performing combos in the database. In practical terms, this means the combination is sufficient for 1080p gaming and acceptable for 1440p, but it is not built for high-refresh-rate or high-resolution play. The data indicates that the GPU's age, with its 8 GB of GDDR5 memory and 256-bit bus, is the primary reason this combo does not climb higher in the rankings.
Best Settings per Resolution
The measured FPS data provides clear guidance on which settings to use at each resolution to stay at or above the 60 FPS playable threshold.
At 3840x2160, no preset achieves 60 FPS. The best recorded average is 48.9 FPS at Low settings, with Medium at 39.2 FPS, High at 30.6 FPS, and Ultra at 25.2 FPS. None of these reach the playable threshold, so the verdict for 4K is that this combo cannot run Fivem smoothly at any settings.
At 2560x1440, the situation improves. The database shows two presets that clear 60 FPS: Low at 86.6 FPS and Medium at 65.3 FPS. The most demanding preset that stays at or above 60 FPS is Medium, with an average of 65.3 FPS. High settings at this resolution drop to 55.9 FPS, which is below the threshold, and Ultra falls further to 44.4 FPS. For 1440p gaming, Medium is the recommended ceiling.
At 1920x1080, the combo has no such limitations. Every preset tested clears 60 FPS, including Ultra at 65.5 FPS. The best settings for 1080p are Ultra, which delivers an average of 65.5 FPS. High settings reach 85.1 FPS, Medium reaches 104.1 FPS, and Low reaches 132.8 FPS. The data shows that 1080p is the sweet spot for this hardware, allowing players to max out the settings while staying above the playable threshold.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component is doing the heavy lifting in Fivem. At 1920x1080, the GPU is the clear bottleneck. The frame rate drops significantly as settings increase, from 132.8 FPS at Low to 65.5 FPS at Ultra, a reduction of 67.3 FPS. This steep decline indicates that the GTX 1070 is being pushed harder by the higher graphical loads, while the CPU has enough headroom to keep up.
At 2560x1440, the same pattern holds. The frame rate falls from 86.6 FPS at Low to 44.4 FPS at Ultra, a drop of 42.2 FPS. The GPU remains the limiting factor, as the increased resolution and settings place more strain on the graphics card. The CPU's role becomes more apparent when comparing the Low preset across resolutions. At 1080p Low, the combo hits 132.8 FPS, but at 1440p Low, it drops to 86.6 FPS, and at 4K Low, it falls to 48.9 FPS. This 83.9 FPS difference between 1080p and 4K at the same settings is primarily due to the GPU's pixel-pushing capabilities, not the CPU.
At 3840x2160, the GPU is overwhelmingly the dominant factor. Even at Low settings, the frame rate drops below 60 FPS, and at Ultra, it falls to 25.2 FPS. The GTX 1070, with its 256.3 GB/s memory bandwidth and 6.463 TFLOPS of FP32 performance, is simply not equipped for 4K gaming in this title. The CPU, which performs well in synthetic benchmarks like Cinebench R23 with a multicore score of 10283 and a single-core score of 1451, is not the issue here. The data shows that the GPU is the limiting factor at every resolution, but its impact grows disproportionately as resolution increases.
Similar Performance Alternatives
The database's nearest rival data provides context for what other hardware would perform similarly to this CPU and GPU. For the Intel Core i5-10400F, the closest matches are the Intel Xeon 6756E, which scores 14163 and is 0.2% slower, and the AMD EPYC 7552, which scores 14115 and is 0.5% slower. On the faster side, the Intel Core 7 160UL scores 14232 and is 0.3% faster, while the AMD Ryzen 3 7320C scores 14277 and is 0.6% faster. These deltas are all within 1%, meaning a user upgrading from or to any of these CPUs would see virtually no difference in Fivem performance.
For the NVIDIA GeForce GTX 1070, the nearest rivals are equally close. The AMD FirePro W5000 scores 9803, which is 0.2% faster, and the NVIDIA Quadro M2000M scores 9832, which is 0.5% faster. On the slower side, the NVIDIA Tesla M10 scores 9724, which is 0.6% slower, and the NVIDIA Tesla C2070 scores 9716, which is 0.7% slower. These GPUs are professional or workstation parts, but the deltas are small enough that they would produce similar frame rates in Fivem. The data indicates that swapping the GTX 1070 for any of these rivals would not meaningfully alter the performance profile of this combo.
Measured FPS Breakdown
The recorded FPS data for this combo shows a clear hierarchy across resolutions and settings. At 1920x1080, the averages are 132.8 FPS at Low, 104.1 FPS at Medium, 85.1 FPS at High, and 65.5 FPS at Ultra. Every setting at this resolution is comfortably above the 60 FPS playable threshold, with the gap between Low and Ultra being 67.3 FPS. The min and max FPS values were not recorded in the database, so the analysis relies on the average figures.
At 2560x1440, the averages are 86.6 FPS at Low, 65.3 FPS at Medium, 55.9 FPS at High, and 44.4 FPS at Ultra. The drop from Medium to High is 9.4 FPS, which pushes the system below the playable threshold. The difference between Low and Ultra at this resolution is 42.2 FPS, showing that the GPU is increasingly strained as settings rise.
At 3840x2160, the averages are 48.9 FPS at Low, 39.2 FPS at Medium, 30.6 FPS at High, and 25.2 FPS at Ultra. None of these reach the 60 FPS threshold, and the gap between Low and Ultra is 23.7 FPS. The data shows a consistent decline in frame rates as resolution increases, with the biggest single-step drop occurring from Low to Medium at 4K, a 9.7 FPS reduction.
The pattern across all resolutions is consistent: the GPU is the limiting factor, and the frame rate scales inversely with both resolution and settings. The data does not include min or max FPS values, so the averages are the sole basis for the verdict.
The Verdict
Based on the measured data, this PC can run Fivem, but only at certain resolutions and settings. At 1920x1080, the verdict is a clear yes. The database lists all four tested presets as playable, with Ultra being the best setting at 65.5 FPS and High at 85.1 FPS. Players with a 1080p monitor can max out the game's settings and still stay above the 60 FPS threshold.
At 2560x1440, the verdict is yes, with limitations. The playable settings are Low and Medium, and the best setting is Medium at 65.3 FPS. High settings fall to 55.9 FPS, which is below the playable threshold, so users at this resolution should stick to Medium or lower. At 3840x2160, the verdict is no. There are no playable settings at this resolution, and the best possible average is 48.9 FPS at Low, which is below the playable threshold.
The data indicates that the GTX 1070 is the reason for the 4K failure, as the CPU has the processing power to handle the game, but the GPU cannot keep up with the pixel load at 4K. For 1080p and 1440p gaming, this combo is a solid choice for Fivem, but for 4K, it falls short. The GPU's 8 GB of GDDR5 memory and 256-bit bus, with a launch MSRP of 379 USD, are sufficient for the lower resolutions, but the data is clear that 4K is not viable.