Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
168 FPS
Ultra 1080p Measured
82 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
61 FPS
Ultra 4K Measured
30 FPS
9.4ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 75,779
Graphics Card
Required 27,716
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 39 48 61
1440p QHD 54 70 87 110
1080p Full HD 82 106 132 168

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 106
1920x1080 Low 168
1920x1080 Medium 132
1920x1080 Ultra 82
2560x1440 High 70
2560x1440 Low 110
2560x1440 Medium 87
2560x1440 Ultra 54
3840x2160 High 39
3840x2160 Low 61
3840x2160 Medium 48
3840x2160 Ultra 30

Performance Analysis: Fivem on Your System

# Measured FPS Breakdown

The benchmark data for Fivem on the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5050 combination reveals a clear performance hierarchy across resolutions and presets. At 1920x1080, the system delivers its strongest results: Low settings produce an average of 168 FPS, Medium drops to 132 FPS (with a minimum of 112 FPS and a maximum of 152 FPS), High settles at 106 FPS, and Ultra still manages a solid 82 FPS. The gap between Low and Ultra at 1080p is 86 FPS, indicating that even the most demanding preset leaves substantial headroom.

Moving to 2560x1440, the averages scale down predictably. Low settings yield 110 FPS, Medium achieves 87 FPS (min 74, max 100), High reaches 70 FPS, and Ultra falls to 54 FPS. The step from Medium to High at 1440p is 17 FPS, while the jump from High to Ultra is 16 FPS, showing a fairly linear degradation as settings increase.

At 3840x2160, the RTX 5050 begins to strain. Low settings still hit 61 FPS on average, but Medium drops to 48 FPS (min 41, max 56), High falls to 39 FPS, and Ultra bottoms out at 30 FPS. The delta between Low and Ultra at 4K is 31 FPS, which is proportionally larger than at lower resolutions, highlighting the GPU's limited bandwidth and shading capacity at high pixel counts.

# Best Settings per Resolution

The playability threshold is set at 60 FPS average. At 3840x2160, only the Low preset clears this bar, with an average of 61 FPS. That is a razor-thin margin — just 1 FPS above the threshold — so the data indicates 4K gaming is possible but with no comfort zone. Medium at 48 FPS and High at 39 FPS fall well short, and Ultra at 30 FPS is not viable for smooth play.

At 2560x1440, three presets exceed 60 FPS: Low at 110 FPS, Medium at 87 FPS, and High at 70 FPS. The most demanding preset that stays at or above 60 FPS is High, with an average of 70 FPS. This gives a 10 FPS buffer over the threshold, which is workable but not generous. Ultra at 54 FPS misses the mark by 6 FPS.

At 1920x1080, all four presets clear 60 FPS. The best playable setting is Ultra, averaging 82 FPS. That provides a 22 FPS cushion, making 1080p Ultra the sweet spot for this combination. Low at 168 FPS, Medium at 132 FPS, and High at 106 FPS are all far above the threshold, but Ultra offers the best visual quality without sacrificing smoothness.

# CPU and GPU Roles

The data shows that the RTX 5050 is the primary bottleneck as resolution climbs. At 1920x1080, the Ryzen 9 9950X3D's 16 cores and 32 threads are more than sufficient to feed the GPU, evidenced by the high frame rates across all presets. The CPU's single-thread performance — a Geekbench single-core score of 3064 and a Passmark single-thread score of 4737 — keeps frame pacing stable even at 168 FPS on Low settings.

As resolution increases to 2560x1440, the GPU's workload grows, and the frame rate drops by roughly 35-40% compared to 1080p for each preset. This scaling is consistent with a GPU-bound scenario: the RTX 5050's 13.17 TFLOPS of FP32 throughput and 320.0 GB/s memory bandwidth are the limiting factors, not the CPU. The CPU's 128 MB of L3 cache and 89.6 GB/s memory bandwidth remain underutilized at this resolution.

At 3840x2160, the GPU's 8 GB of GDDR6 memory and 128-bit bus become critical constraints. The frame rate drop from 1440p to 4K is 45% for Low settings (110 to 61 FPS) and 44% for Ultra (54 to 30 FPS). This near-uniform scaling confirms the GPU is the sole performance limiter at 4K. The CPU's role is effectively negligible beyond ensuring minimum frame times stay consistent, which the 9950X3D's Passmark physics score of 5670 supports.

Notably, the CPU's 3DMark 16-thread score of 16374 and max-thread score of 17184 indicate robust multi-threaded capability, but Fivem's multiplayer workloads rarely scale beyond a few threads. The data suggests that for this game, the RTX 5050's 2560 shading units and 32 ROPs dictate the ceiling, while the CPU only matters for preventing dips below the average.

# FAQ

Q: Can this PC run Fivem at 60 FPS on Ultra settings at 1920x1080?

A: Yes. The average FPS at 1080p Ultra is 82, which is 22 FPS above the 60 FPS threshold.

Q: What is the highest resolution where Ultra settings remain playable?

A: Ultra is only playable at 1920x1080. At 2560x1440, Ultra averages 54 FPS, and at 3840x2160, it drops to 30 FPS.

Q: Is 4K gaming possible with this combination?

A: Only on Low settings, which average 61 FPS. Medium (48 FPS), High (39 FPS), and Ultra (30 FPS) all fall below 60 FPS.

Q: How does the RTX 5050 compare to its nearest rivals in raw benchmarks?

A: The GPU's average benchmark score is 21035. The AMD Radeon RX Vega M GL scores 21153 (0.6% higher), the AMD Radeon HD 8970M scores 21237 (1% higher), the AMD Radeon RX 5600 XT scores 20713 (1.6% lower), and the NVIDIA RTX A4000 Mobile scores 21379 (1.6% higher).

Q: What is the frame range at 2560x1440 on Medium settings?

A: The average is 87 FPS, with a minimum of 74 FPS and a maximum of 100 FPS. The 26 FPS spread indicates some scene complexity variance.

Q: Does the CPU limit performance at any resolution?

A: The data shows no evidence of CPU limitation. The Ryzen 9 9950X3D's 3DMark single-thread score of 1292 and Passmark single-thread score of 4737 are far above what Fivem requires, as frame rates scale consistently with GPU load across resolutions.

# The Verdict

This combination can run Fivem, but the playable envelope depends heavily on resolution. At 1920x1080, the system clears 60 FPS on every preset, with Ultra averaging 82 FPS — a fully playable experience with headroom. At 2560x1440, High settings average 70 FPS, which is playable, but Ultra falls short at 54 FPS. At 3840x2160, only Low settings average 61 FPS, a marginal pass that leaves no room for fluctuation.

The verdict by resolution is clear: 1080p is the ideal target, offering Ultra quality with a 22 FPS buffer. 1440p is viable on High settings with a 10 FPS margin, but users should avoid Ultra. 4K is technically playable only on Low, and the 1 FPS margin above 60 FPS means any demanding scene could push it below the threshold. For a stable experience, 1080p Ultra or 1440p High are the recommended configurations based on the measured data.

# How This Combo Ranks

Among all tested combinations for Fivem, this pairing ranks 2275 out of 3707. That places it in the lower 39th percentile of tested systems, which is consistent with the GPU's mid-range positioning. The RTX 5050's percentile versus all GPUs is 66, meaning it outperforms roughly two-thirds of all GPUs in the database, but its 8 GB memory and 320.0 GB/s bandwidth limit its high-resolution performance.

The CPU, by contrast, sits in the 95th percentile versus all CPUs, with an average benchmark score of 75779. Its nearest rivals — the AMD Ryzen 7 PRO 9755 (75738, 0.1% lower), AMD Ryzen 7 PRO 9755X3D (75716, 0.1% lower), AMD EPYC 8224P (75582, 0.3% lower), and Intel Core Ultra 9 285 (75488, 0.4% lower) — are all within a fraction of a percent, indicating the 9950X3D is at the top of its class.

The mismatch is stark: a top-tier CPU paired with a mid-range GPU. For Fivem, the rank of 2275 reflects that the GPU holds the combo back. The data indicates that upgrading the GPU would yield significantly better frame rates, while the CPU is unlikely to be a limiting factor in any scenario. The combo's overall standing in the database is driven by the GPU's 66th percentile, not the CPU's 95th percentile.