Fivem

The AMD Ryzen 9 9950X3D paired with the NVIDIA GeForce RTX 4060 delivers a highly resolution-dependent experience in Fivem, with the data showing that 1080p and 1440p gaming are largely comfortable while 4K requires significant settings compromises. This combination pairs a top-tier 16-core processor with a mid-range 8 GB graphics card, resulting in a system where the GPU is consistently the primary bottleneck across all tested configurations.

Measured FPS Breakdown

The measured frame rate data for this combo in Fivem reveals clear performance tiers across the three tested resolutions. At 1920x1080, the system produces excellent results across the board. The Low preset delivers an average of 191.2 FPS, which is the highest score recorded for this configuration. Medium settings yield 150.2 FPS, while High settings produce 121.6 FPS. The most demanding Ultra preset still clears the 60 FPS threshold comfortably, with an average of 91.9 FPS. These numbers indicate that at 1080p, the RTX 4060 has ample headroom, and the Ryzen 9 9950X3D’s processing power is more than sufficient to feed the graphics card.

Moving to 2560x1440, the system maintains strong performance but with tighter margins. Low settings produce 124.4 FPS, Medium settings drop to 95.8 FPS, and High settings yield 77.9 FPS. Ultra settings just barely clear the playable threshold with an average of 60.6 FPS. This represents a significant step down from 1080p, with the Ultra preset losing roughly 31.3 FPS compared to its 1080p counterpart. The scaling from 1080p to 1440p shows an average reduction of approximately 35-38% across all presets, which is consistent with the increased pixel count.

The picture changes substantially at 3840x2160. Here, only the Low preset achieves playable frame rates, with an average of 71.3 FPS. Medium settings drop to 56 FPS, which falls below the 60 FPS playability threshold. High settings struggle at 43.8 FPS, and Ultra settings are effectively unplayable at 31.1 FPS. The gap between Low and Ultra at 4K is 40.2 FPS, representing a 56.4% performance drop, which highlights how severely the Ultra preset taxes the RTX 4060’s 8 GB memory buffer and 128-bit bus at this resolution. The data shows no min or max FPS values recorded, only averages, but the trend is unmistakable: 4K is only viable with reduced settings.

CPU and GPU Roles

The benchmark data indicates that the GPU is the dominant factor in this pairing for Fivem, particularly at higher resolutions. The Ryzen 9 9950X3D is a flagship processor with a 95th percentile ranking among all CPUs and an average benchmark score of 75779, while the RTX 4060 sits at only the 61st percentile among GPUs with an average score of 17639. This massive disparity in relative performance tiers suggests the CPU rarely limits frame rates in this configuration.

Evidence for GPU-bound behavior appears in the resolution scaling. At 1080p, the system achieves 191.2 FPS on Low settings, but when resolution increases to 1440p, the same preset drops to 124.4 FPS, a 34.9% reduction. At 4K, Low settings fall to 71.3 FPS, another 42.7% drop from 1440p. These steep declines with increasing resolution are classic symptoms of a GPU-limited scenario, as the CPU’s workload remains largely constant while the GPU must process progressively more pixels.

The CPU’s role becomes more apparent at lower resolutions and settings, where frame rates exceed 150 FPS. At 1080p Medium and Low, the system produces 150.2 FPS and 191.2 FPS respectively, which approaches the practical limits of many display technologies. Even here, the Ryzen 9 9950X3D’s single-thread performance, evidenced by its 1292 score in 3dmark single-thread and 3064 in geekbench singlecore, ensures that Fivem’s multiplayer logic and game simulation do not become a bottleneck. However, the fact that the GPU’s percentile ranking is 34 points lower than the CPU’s suggests that any frame rate ceiling in this system will be imposed by the RTX 4060 first.

FAQ

Q: Can this PC run Fivem at 1920x1080 with Ultra settings?

A: Yes. The measured average FPS at 1080p Ultra is 91.9 FPS, which comfortably exceeds the 60 FPS playability threshold. All four presets at 1080p are marked as playable in the verdict data.

Q: What is the best playable setting at 3840x2160?

A: Low is the only playable preset at 4K, producing an average of 71.3 FPS. Medium settings fall to 56 FPS, which is below the 60 FPS threshold, and High and Ultra are significantly lower at 43.8 FPS and 31.1 FPS respectively.

Q: How does the Ultra preset at 2560x1440 compare to 1080p Ultra?

A: At 1440p Ultra, the system averages 60.6 FPS, which is just above the playability threshold. This represents a 31.3 FPS drop compared to 1080p Ultra’s 91.9 FPS, a reduction of approximately 34%.

Q: Is the CPU or GPU more likely to limit performance in Fivem?

A: The GPU is the limiting factor. The RTX 4060 ranks in the 61st percentile among all GPUs, while the Ryzen 9 9950X3D ranks in the 95th percentile among CPUs. The steep frame rate drops when moving from 1080p to 1440p to 4K further confirm GPU-bound behavior.

Q: What average frame rate can I expect at 2560x1440 with High settings?

A: The measured average FPS at 1440p High is 77.9 FPS. This preset is listed as playable, and the system maintains a healthy margin above the 60 FPS threshold.

Q: Does the RTX 4060’s 8 GB memory capacity affect 4K performance?

A: The data strongly suggests memory pressure at 4K. The Ultra preset at 3840x2160 averages only 31.1 FPS, while dropping to Low recovers to 71.3 FPS, indicating that the reduced memory footprint of lower presets is necessary to maintain playability at this resolution.

Similar Performance Alternatives

For the CPU, the Ryzen 9 9950X3D’s nearest rivals show nearly identical average benchmark scores. The AMD Ryzen 7 PRO 9755 scores 75738, just 0.1% lower. The AMD Ryzen 7 PRO 9755X3D scores 75716, also 0.1% lower. The AMD EPYC 8224P scores 75582, a 0.3% difference, and the Intel Core Ultra 9 285 scores 75488, 0.4% lower. In practical terms, any of these processors would deliver indistinguishable frame rates in Fivem, as they all sit within a fraction of a percent of the 9950X3D’s average score of 75779.

On the GPU side, the RTX 4060’s nearest rivals present a more varied picture. The AMD Radeon HD 7790 scores 17666, which is 0.2% higher than the RTX 4060’s 17639. The AMD Radeon 780M scores 17588, 0.3% lower. The AMD Radeon Pro 560 scores 17551, 0.5% lower, and the AMD Radeon Pro 460 scores 17509, 0.7% lower. Despite these close average scores, the HD 7790 is an older architecture and would likely exhibit different real-world behavior in a modern multiplayer title like Fivem. The integrated Radeon 780M is a particularly interesting comparison, as it demonstrates that the RTX 4060’s discrete performance level is now approachable by some integrated solutions, though the 4060 still holds a slight edge.

For users considering alternatives, the data suggests that swapping the 9950X3D for any of its nearest rivals would produce negligible changes in Fivem performance. Conversely, GPU swaps within the listed rivals would also yield similar average scores, though the 0.2% advantage of the HD 7790 is within the margin of measurement noise and not a meaningful performance lead.

How This Combo Ranks

The combination of the AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 4060 ranks 1983rd out of 3707 tested combos in Fivem. This places the system in the middle of the pack, at approximately the 53rd percentile of all tested configurations. This ranking is notable given the CPU’s top-tier status; the 95th percentile CPU ranking is dragged down significantly by the GPU’s 61st percentile standing.

The rank indicates that while this combo is fully capable of running Fivem at 1080p and 1440p, there are 1724 other combinations that produce better average frame rates in this specific game. The mid-pack positioning makes sense given the measured FPS data: the system clears 60 FPS at all presets in 1080p and 1440p, but it cannot maintain playable performance at 4K Ultra. Many combos with stronger GPUs would achieve higher 4K scores, while combos with weaker CPUs but similar GPUs would likely produce nearly identical results, since the GPU is the primary constraint.

The 3707 total combos in the database underscore the breadth of possible pairings. A rank of 1983 means that roughly 54% of tested systems outperform this configuration in Fivem, while 46% perform worse. This positioning is entirely consistent with the hardware profile: a flagship CPU paired with a mainstream GPU creates a system that excels in CPU-bound scenarios but falls behind in GPU-heavy workloads like high-resolution gaming.

The Verdict

This PC can definitively run Fivem, with the verdict data showing playable performance at multiple resolutions and settings. At 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the Ultra preset averaging 91.9 FPS and Low reaching 191.2 FPS. This resolution offers the best experience, with every setting clearing the 60 FPS threshold by a substantial margin.

At 2560x1440, the system also delivers playable performance across all presets. The Ultra settings achieve 60.6 FPS, which narrowly clears the threshold, while High produces 77.9 FPS and Medium reaches 95.8 FPS. For users with 1440p displays, the data indicates that even maximum settings are viable, though the margin at Ultra is slim.

At 3840x2160, only the Low preset is playable, averaging 71.3 FPS. Medium settings drop to 56 FPS, which fails the 60 FPS playability test. High and Ultra settings are not recommended for 4K gaming, as they produce 43.8 FPS and 31.1 FPS respectively. Users with 4K monitors should plan to run Fivem at reduced settings or accept lower frame rates.

Overall, the verdict is clear: this combination is well-suited for 1080p and 1440p gaming at any preset, while 4K gaming requires the Low preset to maintain playability. The system’s 1983rd rank out of 3707 combos reflects its balanced but GPU-limited nature, and the data confirms that the RTX 4060, not the Ryzen 9 9950X3D, determines the ceiling for this build in Fivem.