Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

84%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
168 FPS
Ultra 1080p Measured
82 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
61 FPS
Ultra 4K Measured
30 FPS
9.4ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 54,762
Graphics Card
Required 27,716
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 39 48 61
1440p QHD 54 70 87 110
1080p Full HD 82 106 132 168

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 106
1920x1080 Low 168
1920x1080 Medium 132
1920x1080 Ultra 82
2560x1440 High 70
2560x1440 Low 110
2560x1440 Medium 87
2560x1440 Ultra 54
3840x2160 High 39
3840x2160 Low 61
3840x2160 Medium 48
3840x2160 Ultra 30

Performance Analysis: Fivem on Your System

Measured FPS Breakdown

The measured performance data for Fivem with the AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 5050 was collected across three resolutions and four quality presets. The 60 FPS playability threshold is met or exceeded in several configurations, but 4K remains constrained.

At 1920x1080, the combination delivers strong frame rates across all settings. The Low preset produces an average of 168 FPS, which is the highest recorded figure for this pairing. Medium follows at 132 FPS average, with the minimum observed at 112 FPS and maximum at 152 FPS. High settings yield 106 FPS average, while Ultra drops to 82 FPS average. All four presets at 1080p clear the 60 FPS threshold by a substantial margin, with even the most demanding Ultra preset maintaining a comfortable 22 FPS headroom above the playability cutoff.

Moving to 2560x1440, the performance scaling reflects the increased pixel workload. Low settings achieve 110 FPS average, a 34.5% reduction compared to the 1080p Low result. Medium delivers 87 FPS average, with minimum and maximum readings of 74 FPS and 100 FPS respectively. High settings produce 70 FPS average, which barely clears the 60 FPS threshold with a 10 FPS margin. Ultra at 1440p falls below the playability line at 54 FPS average, making it the only non-playable preset at this resolution.

At 3840x2160, the RTX 5050's 8 GB memory buffer and 128-bit bus become limiting factors. Low settings achieve 61 FPS average, clearing the threshold by just 1 FPS — the tightest margin in the entire dataset. Medium averages 48 FPS, with a minimum of 41 FPS and maximum of 56 FPS, placing it firmly below playable. High settings drop to 39 FPS average, and Ultra bottoms out at 30 FPS average. The gap between Low and Medium at 4K is 13 FPS, while the gap between Medium and High is 9 FPS, indicating a steep performance cliff as texture and shading complexity increases at this resolution.

The data indicates that the scaling from 1080p to 1440p at Medium settings costs 45 FPS (132 to 87), while the scaling from 1440p to 4K at Medium costs another 39 FPS (87 to 48). This progressive degradation underscores the GPU's bandwidth and capacity constraints at higher resolutions.

Similar Performance Alternatives

The CPU and GPU each have nearby rivals in the benchmark database that would produce broadly comparable frame rates in Fivem.

For the AMD Ryzen 9 9900X3D, the nearest rivals are led by the Intel Core Ultra 5 245KF, which posts an average benchmark score of 55093 — a 0.6% deficit relative to this processor. The Intel Core Ultra 5 245K scores 54053, representing a 1.3% advantage for the Ryzen chip. The Intel Xeon 6505P trails by 2.0% with a score of 53701, while the Intel Core i7-14700F is 2.1% behind at 53620. These deltas are small enough that in a game like Fivem, which does not heavily stress multi-threaded compute, the practical FPS differences would be minimal. The 9900X3D's 12 cores and 24 threads provide ample headroom, but the nearest rivals would not meaningfully change the measured FPS at any resolution.

For the NVIDIA GeForce RTX 5050, the nearest rivals cluster tightly around its average benchmark score of 21035. The AMD Radeon RX Vega M GL scores 21153, a 0.6% edge over the RTX 5050. The AMD Radeon HD 8970M posts 21237, which is 1.0% higher. The AMD Radeon RX 5600 XT scores 20713, representing a 1.6% deficit for the RTX 5050. The NVIDIA RTX A4000 Mobile leads by 1.6% at 21379. These four rivals are all within a 3.2% spread of each other, suggesting that swapping the RTX 5050 for any of these GPUs would produce nearly identical FPS in Fivem. The RX 5600 XT, in particular, would be the closest AMD alternative in terms of raw benchmark performance.

The practical implication is that this combo sits in a performance tier where the GPU is the binding constraint at 4K, while the CPU's nearest rivals would not alter the playability verdict at any resolution.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU divide responsibility across resolutions in Fivem.

At 1920x1080, the frame rates are high enough that both components are likely contributing, but the scaling between presets is relatively modest. The drop from Low to Ultra at 1080p is 86 FPS (168 to 82), which indicates the GPU is being progressively loaded. The Ryzen 9 9900X3D's single-thread score of 1269 in 3DMark and Cinebench R23 single-core score of 6739 suggest it has ample headroom for Fivem's typical server-side and client-side processing at this resolution.

At 2560x1440, the GPU's role becomes more pronounced. The delta between Low and Ultra expands to 56 FPS (110 to 54), and the Ultra preset falls below 60 FPS. This is consistent with the RTX 5050's 13.17 TFLOPS FP32 throughput and 320.0 GB/s memory bandwidth being insufficient for the highest quality settings at this resolution. The CPU's multi-threaded capabilities, evidenced by its Cinebench R23 multi-core score of 47737, are not the limiting factor here.

At 3840x2160, the GPU is decisively the bottleneck. The entire resolution averages between 30 and 61 FPS across presets, with even Low settings barely clearing 60 FPS. The RTX 5050's 8 GB GDDR6 memory and 128-bit bus width are the structural constraints. The CPU's benchmark scores — including a PassMark multi-thread score of 56154 and Geekbench multi-core score of 22884 — would not change the outcome at 4K. The data shows that resolution scaling affects the GPU disproportionately, and the CPU's role diminishes as resolution increases.

The Verdict

This PC can run Fivem, but the playable envelope is resolution-dependent.

At 1920x1080, the system clears 60 FPS at every preset. The Ultra setting averages 82 FPS, which is the most demanding configuration tested and still provides a 22 FPS buffer above the threshold. This is the fully playable resolution.

At 2560x1440, the system remains playable at High settings with 70 FPS average, as well as Medium at 87 FPS and Low at 110 FPS. The Ultra preset falls short at 54 FPS average. Users targeting 1440p should select High for the best visual quality while maintaining playability.

At 3840x2160, only the Low preset clears 60 FPS, achieving 61 FPS average. Medium, High, and Ultra all fall below the threshold at 48, 39, and 30 FPS respectively. The verdict for 4K is that the system can run the game only at the lowest quality settings.

The RTX 5050's 8 GB memory capacity and the CPU's 128 MB L3 cache both contribute to the observed behavior, but the former is the primary constraint at high resolutions.

FAQ

Q: Can this PC run Fivem at 4K with High settings?

A: No. At 3840x2160 with High settings, the average FPS is 39, which is below the 60 FPS playability threshold. Only the Low preset at 4K achieves playable performance, with an average of 61 FPS.

Q: What is the best quality preset at 2560x1440 that stays above 60 FPS?

A: The High preset at 1440p delivers an average of 70 FPS, which is the highest quality setting that clears the 60 FPS threshold. The Medium preset averages 87 FPS, and Low averages 110 FPS.

Q: How does the RTX 5050 compare to its nearest GPU rivals in benchmark scores?

A: The RTX 5050 has an average benchmark score of 21035. The AMD Radeon RX Vega M GL scores 21153 (0.6% higher), the AMD Radeon HD 8970M scores 21237 (1.0% higher), the AMD Radeon RX 5600 XT scores 20713 (1.6% lower), and the NVIDIA RTX A4000 Mobile scores 21379 (1.6% higher).

Q: Does the Ryzen 9 9900X3D bottleneck the RTX 5050 in Fivem?

A: The data does not indicate a CPU bottleneck at any resolution. The frame rate scaling between presets and resolutions is consistent with the GPU being the limiting factor, particularly at 1440p Ultra and all 4K settings. The CPU's benchmark scores, including a Cinebench R23 multi-core score of 47737, suggest substantial headroom.

Q: What FPS does the system achieve at 1080p with Ultra settings?

A: At 1920x1080 with Ultra settings, the average FPS is 82, which is above the 60 FPS threshold. This is the most demanding configuration at 1080p and remains playable.

Q: Is 4K playable at any setting with this combination?

A: Yes, but only at the Low preset. The 3840x2160 Low setting averages 61 FPS, which is exactly 1 FPS above the playability threshold. All other 4K presets fall below 60 FPS.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the most demanding configuration that stays at or above 60 FPS, with an average of 82 FPS. This provides the highest visual quality available at this resolution while maintaining a comfortable margin above the threshold.

At 2560x1440, the High preset is the best choice, averaging 70 FPS. Ultra at this resolution drops to 54 FPS average, which is below the playability line. High offers the best balance of visual fidelity and playability.

At 3840x2160, only the Low preset achieves playable performance, averaging 61 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 48, 39, and 30 FPS respectively. Users at 4K must accept the lowest quality settings to maintain playability.

How This Combo Ranks

The AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 5050 combination ranks 2275 out of 3707 tested combos in Fivem. This places the pairing in the lower portion of the overall distribution, reflecting the RTX 5050's mid-tier position in the GPU hierarchy.

The CPU's percentile rank of 91 among all CPUs indicates strong processing capability, while the GPU's percentile rank of 66 among all GPUs is more modest. The combination's overall ranking is dragged down by the GPU's performance ceiling, particularly at higher resolutions. The CPU's nearest rivals — all within 2.1% of its average benchmark score — would not shift the combo's rank meaningfully. The GPU's nearest rivals, which are all within a 3.2% spread, similarly would not alter the outcome.

The 2275th position out of 3707 combos suggests that many alternative pairings, particularly those with higher-tier GPUs, would deliver better Fivem performance. However, the data also shows that this combo is sufficient for 1080p gaming at all presets and 1440p gaming at up to High settings. The rank reflects the GPU's limitation at 4K rather than any CPU deficiency.