Fivem

The AMD Ryzen 9 7900X paired with the NVIDIA GeForce RTX 5060 delivers a wide spread of frame rates in Fivem, ranging from a demanding 36 FPS at 4K Ultra to a fluid 201 FPS at 1080p Low. The measured data shows that this combination is highly capable at standard resolutions, but requires careful settings management to maintain smooth gameplay at 4K. The following analysis breaks down the performance metrics across all tested resolutions and presets, using only the provided benchmark results.

Measured FPS Breakdown

At 1920x1080, the RTX 5060 demonstrates its strongest performance. With Low settings, the combo achieves an average of 201 FPS. Moving to Medium settings, the average drops to 159 FPS, with a minimum of 135 FPS and a maximum of 183 FPS. High settings produce an average of 127 FPS, while Ultra settings still deliver a robust 99 FPS average. These numbers indicate that at 1080p, every preset clears the 60 FPS playable threshold by a substantial margin, making this resolution the sweet spot for high refresh rate monitors.

Stepping up to 2560x1440, performance remains strong but shows a clear scaling pattern. The Low preset yields an average of 133 FPS. Medium settings average 105 FPS, with a recorded minimum of 89 FPS and maximum of 120 FPS. High settings deliver 84 FPS on average, and Ultra settings produce 65 FPS. All four presets remain above the 60 FPS threshold, though Ultra sits just 5 FPS above it, suggesting that this setting is the practical ceiling for consistent smoothness at 1440p.

At 3840x2160, the picture changes dramatically. The Low preset averages 74 FPS, which is the only setting at this resolution that clears the 60 FPS mark. Medium settings average 58 FPS, with a minimum of 49 FPS and a maximum of 67 FPS, showing noticeable frame dips below the playable threshold. High settings drop to 46 FPS, and Ultra falls to 36 FPS. The gap between Low and Ultra at 4K is 38 FPS, highlighting the significant cost of higher graphical fidelity at this resolution.

The data also reveals the impact of resolution scaling. Comparing Low presets, 1080p produces 201 FPS, 1440p produces 133 FPS, and 4K produces 74 FPS. This represents a 67 FPS drop from 1080p to 1440p and a further 59 FPS drop from 1440p to 4K. The trend is consistent across all presets, with the RTX 5060 showing a predictable performance curve as pixel count increases.

How This Combo Ranks

In the global database of tested combinations for Fivem, this CPU-GPU pairing ranks 1637 out of 3707 total combos. This places it in the 44th percentile of all tested systems, meaning roughly 44 percent of combinations perform better while 56 percent perform worse. The rank reflects a mid-to-upper tier position, indicating that while this setup is not at the top of the leaderboard, it holds its own against a majority of tested hardware.

The ranking context becomes clearer when examining the individual component benchmarks. The Ryzen 9 7900X sits in the 91st percentile against all CPUs, with an average benchmark score of 53288. The RTX 5060 places in the 72nd percentile against all GPUs, with an average score of 26331. This discrepancy suggests that the CPU is a stronger performer relative to its peers than the GPU, which may explain why the combo ranks lower than the CPU's percentile would suggest.

Within the game itself, the combo's rank of 1637 out of 3707 indicates that Fivem is a title where the GPU's limitations become more apparent. The CPU's high percentile ranking does not fully compensate for the GPU's mid-range position, particularly at higher resolutions where pixel throughput becomes the primary bottleneck.

Similar Performance Alternatives

The nearest rivals for the Ryzen 9 7900X, based on average benchmark scores, include the AMD EPYC 7313P with a score of 53206, which is 0.2 percent lower. The Intel Xeon Phi 7290 scores 53469, 0.3 percent higher. The Intel Xeon 634 scores 52974, 0.6 percent lower. The Intel Core i7-14700F scores 53620, 0.6 percent higher. These processors would deliver nearly identical CPU-bound performance in Fivem, making them viable alternatives if the platform were swapped.

For the RTX 5060, the nearest GPU rivals are the AMD Radeon 860M with a score of 26401, 0.3 percent lower. The NVIDIA GeForce MX550 scores 26421, also 0.3 percent lower. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, 0.8 percent higher. The AMD Radeon RX 6750 XT scores 26011, 1.2 percent lower. These GPUs would produce nearly identical frame rates in Fivem, meaning a system built with any of these alternatives would behave similarly.

When considering a full system swap, pairing the Ryzen 9 7900X with any of these rival GPUs would shift performance by less than one percent in either direction. Similarly, pairing the RTX 5060 with any rival CPU would yield comparable results. The tight clustering of scores, all within 1.2 percent, indicates that users would not notice a practical difference between these components in real-world Fivem gameplay.

The Verdict

The verdict by resolution is clear. At 1920x1080, this PC can run Fivem at all four tested presets above 60 FPS. The Ultra preset averages 99 FPS, providing a comfortable margin above the playable threshold. At 2560x1440, the system also runs all presets above 60 FPS, with Ultra averaging 65 FPS. This leaves little headroom, so users should expect occasional dips near the threshold during heavy scenes.

At 3840x2160, the system can run Fivem only on the Low preset, which averages 74 FPS. Medium settings fall below 60 FPS at 58 FPS, and High and Ultra are not playable at 46 and 36 FPS respectively. The data indicates that 4K gaming is possible but restricted to the lowest graphical settings. For users prioritizing visual quality, 1440p Ultra is the highest preset that maintains smooth performance across all tested resolutions.

The playable threshold is defined as 60 FPS. At 1080p and 1440p, all presets meet or exceed this threshold. At 4K, only Low meets it. This makes the system a solid choice for 1080p and 1440p gaming, with limited 4K capability.

CPU and GPU Roles

The scaling between resolutions reveals which component dominates in Fivem. At 1080p, the CPU's high percentile ranking likely contributes to the strong 201 FPS Low result, as lower resolutions reduce GPU load and allow the processor to drive higher frame rates. The Ryzen 9 7900X, with its 12 cores and 24 threads, provides ample headroom for the game's multiplayer logic.

As resolution increases to 1440p and then 4K, the GPU becomes the limiting factor. The average FPS drops by roughly 34 percent from 1080p to 1440p and by another 44 percent from 1440p to 4K on Low settings. This steep decline indicates that the RTX 5060's pixel throughput, rather than CPU capability, constrains performance at higher resolutions.

The preset scaling further confirms this. At 1080p, the gap between Low and Ultra is 102 FPS, showing the GPU's ability to handle increased graphical load at lower pixel counts. At 4K, the same gap is 38 FPS, a smaller absolute difference but a larger percentage drop from 74 FPS to 36 FPS. This suggests that at 4K, both GPU and memory bandwidth are saturated, making the GPU the clear bottleneck.

The CPU's role is more pronounced at 1080p, where the 201 FPS Low result approaches what many CPUs would struggle to deliver. The 91st percentile CPU ranking supports this, indicating that the Ryzen 9 7900X provides exceptional single-thread and multi-thread performance for Fivem's simulation and networking tasks.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 99 FPS. This provides the best visual quality while maintaining a 39 FPS margin above the playable threshold. Users could also choose High at 127 FPS or Medium at 159 FPS for higher refresh rates, but Ultra offers the best balance of fidelity and performance.

At 2560x1440, the best preset is Ultra, averaging 65 FPS. This clears the 60 FPS threshold but with a slim 5 FPS margin. For users who prefer more headroom, High at 84 FPS or Medium at 105 FPS are safer choices, though Ultra remains technically playable according to the data.

At 3840x2160, the best preset is Low, averaging 74 FPS. This is the only setting that maintains 60 FPS or higher. Medium falls short at 58 FPS, so users at 4K must accept reduced visual fidelity to achieve smooth gameplay. The 74 FPS result provides a 14 FPS buffer, but it is the only viable option at this resolution.

FAQ

Q: Can this system run Fivem at 4K with Ultra settings?

A: No. The measured average FPS at 3840x2160 Ultra is 36 FPS, which is well below the 60 FPS playable threshold. Only the Low preset at 4K clears 60 FPS.

Q: What is the highest playable preset at 1440p?

A: Ultra settings are playable at 2560x1440, with an average of 65 FPS. This is above the 60 FPS threshold, though the margin is only 5 FPS.

Q: How does the CPU's performance compare to its nearest rivals?

A: The Ryzen 9 7900X scores 53288 on average. The AMD EPYC 7313P is 0.2 percent lower, the Intel Xeon Phi 7290 is 0.3 percent higher, the Intel Xeon 634 is 0.6 percent lower, and the Intel Core i7-14700F is 0.6 percent higher.

Q: What GPU alternatives would perform similarly?

A: The AMD Radeon 860M, NVIDIA GeForce MX550, AMD Radeon RX 5700 XT 50th Anniversary, and AMD Radeon RX 6750 XT all have average scores within 1.2 percent of the RTX 5060, making them comparable in Fivem.

Q: Is 1080p performance sufficient for high refresh rate monitors?

A: Yes. At 1920x1080, Low settings average 201 FPS, Medium averages 159 FPS, High averages 127 FPS, and Ultra averages 99 FPS. All presets exceed 60 FPS by a wide margin.

Q: What is the frame rate drop from 1080p to 4K on Low settings?

A: The average FPS drops from 201 at 1080p to 133 at 1440p, then to 74 at 4K. This represents a 127 FPS total decrease from the lowest to highest tested resolution.