Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 64 | 82 | 102 | 126 |
| 1440p QHD | 112 | 144 | 186 | 235 |
| 1080p Full HD | 174 | 221 | 277 | 331 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 5080 delivers exceptional frame rates in Fivem across all tested resolutions and settings, with the data indicating that this combination consistently clears the 60 FPS playable threshold even at the most demanding preset. Benchmark results for this pairing show a clear performance hierarchy that scales predictably with resolution and graphical fidelity, positioning this combo as a top-tier option for this multiplayer title.
Measured FPS Breakdown
At 3840x2160, the benchmark data shows a spread of average frame rates that ranges from 63.5 FPS at Ultra settings to 126.4 FPS at Low settings. The High preset delivers an average of 82 FPS, while the Medium preset achieves 102.2 FPS. This 4K resolution represents the most demanding scenario for the combo, with the Ultra preset barely clearing the 60 FPS playable threshold by a margin of 3.5 FPS. The scaling from Low to Ultra at this resolution shows a drop of 62.9 FPS, which is a substantial reduction of approximately 49.8% from the Low preset’s performance. The data indicates that even at 4K, the RTX 5080 and Ryzen 7 7800X3D maintain playable frame rates across every tested setting, though Ultra is the only preset that falls below the 100 FPS mark.
Moving to 2560x1440, the measured FPS figures show a significant improvement over 4K. The Low preset reaches an average of 234.6 FPS, which is the highest frame rate recorded at this resolution. Medium settings produce 185.7 FPS, High settings achieve 143.7 FPS, and Ultra settings deliver 111.8 FPS. The delta between Low and Ultra at 1440p is 122.8 FPS, representing a 52.3% performance reduction when moving to the highest preset. All four settings at this resolution comfortably exceed the 60 FPS threshold, with even the Ultra preset maintaining a 51.8 FPS margin above the playable limit. The jump from 4K Ultra to 1440p Ultra represents a 48.3 FPS increase, showing that resolution scaling has a substantial impact on this game’s performance.
At 1920x1080, the combo delivers exceptional frame rates that push well beyond typical display refresh rates. The Low preset achieves an average of 331.2 FPS, which is the highest measured value in the entire dataset. Medium settings produce 277.1 FPS, High settings reach 221.3 FPS, and Ultra settings maintain 174 FPS. The performance gap between Low and Ultra at 1080p is 157.2 FPS, a 47.5% reduction. Notably, the 1080p Ultra preset delivers 62.2 FPS more than the 1440p Ultra preset, and 110.5 FPS more than the 4K Ultra preset. The data shows that at 1080p, this combo is not constrained by the playable threshold in any way, with even the most demanding preset running at nearly three times the 60 FPS minimum.
The measured FPS data does not include minimum or maximum frame rate values, so the analysis relies solely on average FPS figures. Across all resolutions, the scaling pattern remains consistent: Low settings always produce the highest frame rates, followed by Medium, then High, with Ultra being the most demanding preset. The relative performance drop from Low to Ultra is similar across resolutions, ranging from 47.5% at 1080p to 52.3% at 1440p, with 4K showing a 49.8% reduction.
FAQ
Q: Can this PC run Fivem at 4K resolution with Ultra settings?
A: Yes, the data shows an average of 63.5 FPS at 3840x2160 with Ultra settings, which clears the 60 FPS playable threshold by a margin of 3.5 FPS. This is the only preset at 4K that falls below the 100 FPS mark, but it remains playable.
Q: What is the highest frame rate this combo achieves in Fivem?
A: The highest measured average FPS is 331.2, which occurs at 1920x1080 resolution with Low settings. This represents the absolute ceiling of the tested configurations.
Q: How much performance drops when moving from Low to Ultra settings?
A: The performance penalty varies by resolution. At 1080p, the drop is 157.2 FPS (from 331.2 to 174). At 1440p, the drop is 122.8 FPS (from 234.6 to 111.8). At 4K, the drop is 62.9 FPS (from 126.4 to 63.5).
Q: Which resolution provides the best balance of visual quality and performance?
A: At 2560x1440 with Ultra settings, the combo delivers 111.8 FPS, which is well above the 60 FPS threshold while still offering the highest visual preset. This provides a 48.3 FPS advantage over 4K Ultra performance.
Q: Is the Ultra preset playable at every resolution tested?
A: Yes, Ultra settings produce playable frame rates at all three resolutions. The lowest Ultra performance is 63.5 FPS at 4K, while 1440p Ultra achieves 111.8 FPS and 1080p Ultra reaches 174 FPS, all above the 60 FPS playable threshold.
Q: How does the RTX 5080’s performance compare to its nearest rival in the benchmark data?
A: The RTX 5080 has an average benchmark score of 56083, which is 0.6% higher than the AMD Radeon 8060S, 0.7% higher than the AMD Radeon RX 6750 GRE 12 GB, and 2.3% higher than the AMD Radeon Pro W5700X. It trails the AMD Radeon RX 9070 GRE by 2.2%.
Similar Performance Alternatives
The nearestRivals data for the CPU and GPU provides insight into what other hardware combinations would deliver comparable performance in Fivem. For the AMD Ryzen 7 7800X3D, the nearest competitors by average benchmark score include the AMD Ryzen 7 8700G and Intel Core i7-13650HX, both with an identical average score of 33089, showing a 0% delta from the 7800X3D’s score. The AMD Ryzen 7 7745HX also matches with a score of 33091 and a 0% delta. The AMD Ryzen 9 PRO 6950H trails slightly with a score of 33201, representing a -0.4% delta. This means that swapping the 7800X3D for any of these three processors would result in nearly identical CPU-bound performance in Fivem, with frame rate differences likely falling within the margin of measurement error.
On the GPU side, the NVIDIA GeForce RTX 5080’s nearest rivals show a tighter grouping. The AMD Radeon 8060S has an average score of 55757, which is 0.6% lower than the RTX 5080’s 56083. The AMD Radeon RX 6750 GRE 12 GB scores 55698, a 0.7% difference. The AMD Radeon Pro W5700X scores 54828, representing a 2.3% deficit. The AMD Radeon RX 9070 GRE is the only rival that scores higher, with 57367, a 2.2% advantage over the RTX 5080. In practical terms, these GPU alternatives would produce FPS figures within a few percentage points of the RTX 5080’s measured results. For example, at 1080p Ultra where the RTX 5080 achieves 174 FPS, the AMD Radeon RX 9070 GRE might achieve approximately 177.8 FPS based on the 2.2% score difference, while the AMD Radeon RX 6750 GRE 12 GB would deliver roughly 172.8 FPS.
Combining these rival components, a system with an AMD Ryzen 7 8700G or Intel Core i7-13650HX paired with an AMD Radeon RX 9070 GRE would likely produce frame rates very close to the measured values for the 7800X3D and RTX 5080 combination. The CPU differences are negligible at 0% delta, and the GPU difference would shift results by only a few FPS in either direction. The data suggests that this tier of hardware is well-matched to Fivem’s engine, with performance being primarily GPU-limited at higher resolutions and settings.
The Verdict
The benchmark data clearly indicates that this PC can run Fivem with excellent performance across all tested configurations. The verdictByResolution data confirms that all four settings presets—Low, Medium, High, and Ultra—are playable at every resolution tested, meaning the 60 FPS threshold is met or exceeded in all twelve measured scenarios. At 3840x2160, the best playable setting is Ultra with an average of 63.5 FPS, which narrowly clears the playable threshold. At 2560x1440, Ultra settings achieve 111.8 FPS, providing a substantial margin above the 60 FPS minimum. At 1920x1080, Ultra settings reach 174 FPS, offering performance far beyond what most displays can even refresh.
The most demanding scenario in the entire dataset is 4K Ultra at 63.5 FPS, which is still playable but leaves little headroom for frame time spikes or demanding multiplayer scenarios. The data does not include minimum FPS values, so the analysis cannot assess frame pacing consistency. However, based on average FPS alone, this combo never drops below the playable threshold in any tested configuration. For gamers prioritizing visual fidelity, 4K Ultra is viable. For those seeking high refresh rate gaming, 1440p and 1080p resolutions offer ample performance headroom, with 1440p Ultra delivering 111.8 FPS and 1080p Ultra delivering 174 FPS.
CPU and GPU Roles
The scaling data between resolutions and presets provides insight into which component matters more for Fivem at each resolution. The CPU, an AMD Ryzen 7 7800X3D with 8 cores and 16 threads, has a 3DMark max threads score of 7967 and a single thread score of 959. The GPU, an NVIDIA GeForce RTX 5080 with 10752 shading units and 112 ROPs, shows a PassMark G3D score of 36565.
At 3840x2160, the performance drop from Low to Ultra is 62.9 FPS, which is the smallest absolute drop among all resolutions. This suggests that at 4K, the GPU becomes the primary bottleneck, as the resolution demands more pixel throughput and the CPU has more time to feed frames. The RTX 5080’s 960.0 GB/s memory bandwidth and 56.28 TFLOPS FP32 performance are heavily utilized at this resolution.
At 2560x1440, the drop from Low to Ultra is 122.8 FPS, nearly double the 4K drop. This indicates that as resolution decreases, the CPU begins to play a larger role in determining frame rates. The Ryzen 7 7800X3D’s strong single-thread performance (959 in 3DMark single thread) and 96 MB of shared L3 cache help maintain high frame rates at lower resolutions where the GPU is less stressed.
At 1920x1080, the drop from Low to Ultra is 157.2 FPS, the largest absolute drop in the dataset. This pattern strongly suggests that at 1080p, the CPU is the limiting factor in the highest presets, while the GPU has excess capacity. The 331.2 FPS at Low settings indicates the CPU can push very high frame rates, but the 174 FPS at Ultra shows that the increased draw calls and physics calculations at higher presets create CPU overhead.
The data indicates that Fivem becomes more CPU-bound as resolution decreases. At 4K, the GPU dominates performance, with the RTX 5080 determining the frame rate ceiling. At 1080p, the CPU’s ability to process game logic and draw calls becomes more critical, though both components remain highly capable. The 7800X3D’s 3D V-Cache architecture likely contributes to its ability to maintain high frame rates in multiplayer scenarios with many entities.
How This Combo Ranks
The comboRankInGame data places this pairing at rank 175 out of 3707 total tested combinations. This places the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 5080 in the top 4.7% of all tested combos for Fivem. The rank of 175 among 3707 indicates that there are 174 other hardware combinations that achieve higher average frame rates in this game, but the vast majority of tested systems perform worse.
The high rank is consistent with the measured FPS data showing playability at all settings and resolutions. The CPU’s percentileVsAllCpus of 83 and the GPU’s percentileVsAllGpus of 87 further reinforce that this combo uses high-performing components relative to their respective product categories. The CPU’s average benchmark score of 33079 and the GPU’s average benchmark score of 56083 contribute to this strong ranking.
In the context of all 3707 tested combos, this pairing’s rank of 175 means it outperforms 3532 other combinations. The gap between this combo and the top-ranked systems is not quantified in the data, but the measured FPS values indicate that even the most demanding scenario (4K Ultra at 63.5 FPS) remains playable, suggesting that higher-ranked combos likely achieve even higher frame rates at 4K or maintain higher minimum FPS values.
Best Settings per Resolution
For 3840x2160, the best settings that maintain an average FPS at or above 60 are Ultra, which delivers 63.5 FPS. This is the most demanding preset tested, and it barely clears the playable threshold. The data shows that all four presets—Low at 126.4 FPS, Medium at 102.2 FPS, High at 82 FPS, and Ultra at 63.5 FPS—are playable at 4K. However, Ultra is the optimal choice for visual quality while remaining above 60 FPS, though the 3.5 FPS margin is thin.
For 2560x1440, the best settings are also Ultra, achieving 111.8 FPS. This provides a comfortable margin above the 60 FPS threshold while offering the highest visual preset. The 1440p Ultra performance is 48.3 FPS higher than 4K Ultra, making this resolution the sweet spot for combining high visual quality with high frame rates.
For 1920x1080, the best settings are Ultra at 174 FPS. This is the highest frame rate among the Ultra presets across all resolutions, and it exceeds the 60 FPS threshold by 114 FPS. Even the most demanding preset at 1080p provides performance suitable for high refresh rate monitors, with the data suggesting that this combo can drive 144Hz or 165Hz displays without significant compromise.
Across all resolutions, the Ultra preset is always the best choice for visual fidelity while maintaining playable frame rates. The data does not include any preset that fails to meet the 60 FPS threshold, so there is no scenario where users must sacrifice settings to achieve playability. The only consideration is that 4K Ultra leaves minimal headroom, while 1080p and 1440p offer substantial performance reserves.