Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
360 FPS
Ultra 1080p Measured
181 FPS

1440p (2K / QHD)

Low 1440p Measured
242 FPS
Ultra 1440p Measured
119 FPS

4K (Ultra HD)

Low 4K Measured
133 FPS
Ultra 4K Measured
64 FPS
4.3ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 40,081
Graphics Card
Required 27,716
Your GPU 60,347

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 64 84 107 133
1440p QHD 119 151 193 242
1080p Full HD 181 234 290 360

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 234
1920x1080 Low 360
1920x1080 Medium 290
1920x1080 Ultra 181
2560x1440 High 151
2560x1440 Low 242
2560x1440 Medium 193
2560x1440 Ultra 119
3840x2160 High 84
3840x2160 Low 133
3840x2160 Medium 107
3840x2160 Ultra 64

Performance Analysis: Fivem on Your System

The AMD Ryzen 7 7700 paired with the NVIDIA GeForce RTX 4090 delivers an exceptionally strong performance profile in Fivem, with measured data across three resolutions and four quality presets. The benchmark results, derived from a combination that ranks 114th out of 3,707 tested configurations, show that this system is capable of high frame rates even under maximum graphical load, though the gap between the lowest and highest presets widens significantly as resolution increases.

Measured FPS Breakdown

At 1920x1080, the system produces frame rates that push well beyond the capabilities of most displays. With Low settings, the average FPS reaches 360.2, which is the highest measured value across the entire dataset. Moving to Medium settings drops the average to 290.4, while High settings yield 233.8 FPS. The Ultra preset, which is the most demanding configuration tested, still maintains an average of 181.4 FPS. The scaling from Low to Ultra at this resolution represents a reduction of approximately 50% in average frame rate, yet even the lowest figure remains comfortably above any competitive threshold.

At 2560x1440, the pattern remains consistent but with a noticeable step down in absolute numbers. The Low preset averages 242.4 FPS, while Medium produces 192.8 FPS. High settings deliver 151.3 FPS, and Ultra drops to 119.2 FPS. The relative performance loss from Low to Ultra at this resolution is similar to 1080p, but the absolute margins narrow, indicating that the GPU is beginning to face a heavier workload as pixel count increases.

The 3840x2160 results show the most significant impact from resolution scaling. Low settings average 132.5 FPS, Medium drops to 106.8 FPS, and High falls to 84.2 FPS. The Ultra preset at 4K is the only configuration in the entire dataset that approaches the 60 FPS threshold, averaging 63.7 FPS. This represents a 50% reduction compared to the same preset at 1440p, underscoring how much headroom the RTX 4090 loses when driving four times the pixel count of 1080p.

Across all resolutions, the data shows a consistent hierarchy: Low is fastest, followed by Medium, then High, with Ultra being the slowest. The average FPS figures provided do not include minimum or maximum values, so the analysis relies solely on these averages to characterize performance consistency.

Best Settings per Resolution

For users targeting a stable 60 FPS experience, the most demanding preset that remains at or above that threshold varies by resolution. At 1920x1080, the Ultra preset is fully playable, with an average of 181.4 FPS. This is the highest quality setting available, and it clears the 60 FPS mark by a wide margin.

At 2560x1440, Ultra again qualifies as the best playable setting, averaging 119.2 FPS. This leaves substantial room above the playability threshold, suggesting that even more demanding scenarios or future updates would likely maintain smooth performance.

The 3840x2160 resolution presents the only borderline case. Ultra settings average 63.7 FPS, which is above the 60 FPS threshold but by a narrow margin of just 3.7 FPS. This is the most demanding configuration that can be recommended, but the data shows it is the least comfortable of the three resolutions in terms of headroom. Lower presets at 4K, such as High at 84.2 FPS, provide more breathing room if frame rate stability is prioritized over maximum visual fidelity.

How This Combo Ranks

The combination of the AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4090 holds a rank of 114 out of 3,707 tested combos in Fivem. This places the system in the top 3% of all configurations, a position that reflects the strength of both components in this specific game. The percentile data for the individual parts reinforces this: the CPU sits at the 87th percentile against all CPUs, while the GPU is at the 88th percentile against all GPUs.

The ranking indicates that while the RTX 4090 is one of the most powerful consumer GPUs available, the Ryzen 7 7700 is a mid-to-high-range processor rather than a flagship. In a game like Fivem, which is a multiplayer modification built on an older engine, the CPU can play a significant role in handling server-side and simulation tasks. The fact that this combo still ranks 114th suggests that there are 113 other configurations that outperform it, likely featuring even stronger CPUs or more specialized hardware.

The percentile scores for the CPU and GPU are close, but the GPU’s slightly higher percentile suggests that it is the more dominant component in this pairing. The measured FPS data supports this interpretation, as the frame rates scale predictably with resolution changes, a characteristic of GPU-bound workloads.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide insight into what other hardware would deliver comparable performance. For the AMD Ryzen 7 7700, the closest alternatives are the AMD Ryzen AI 9 365, the Intel Core 5 221E, the AMD Ryzen 9 270, and the Intel Core i9-13905H. The average benchmark scores for these processors are all within a narrow band: the Ryzen AI 9 365 scores 40,048, which is 0.1% lower than the Ryzen 7 7700’s 40,081. The Intel Core 5 221E scores 40,144, a 0.2% advantage, while the AMD Ryzen 9 270 scores 40,246, a 0.4% advantage. The Intel Core i9-13905H leads this group with 40,313, a 0.6% difference.

These deltas are minimal, meaning that swapping the Ryzen 7 7700 for any of these processors would result in nearly identical frame rates in Fivem, assuming the same GPU. The differences are well within the margin of error for real-world testing.

For the NVIDIA GeForce RTX 4090, the nearest rivals are more varied. The Intel Arc Pro A60 scores 60,326, which is essentially identical to the RTX 4090’s 60,347, a 0% difference. The AMD Radeon Pro Vega 48 scores 60,140, a 0.3% deficit, while the AMD Radeon Pro W6600M scores 61,896, a 2.5% advantage. The AMD Radeon PRO V710 scores 58,657, a 2.9% deficit. These alternatives are workstation-oriented GPUs, which is notable given that the RTX 4090 is a consumer gaming card. The similarity in scores suggests that, in synthetic benchmarks, these professional cards can match or slightly exceed the RTX 4090, but their real-world gaming performance may differ due to driver optimizations and feature sets.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU in Fivem. The scaling between resolutions provides the strongest evidence: at 1080p, the Ultra preset averages 181.4 FPS, which drops to 119.2 FPS at 1440p and then to 63.7 FPS at 4K. This represents a 34% reduction from 1080p to 1440p and a further 47% reduction from 1440p to 4K. Such steep declines with increasing resolution are the hallmark of a GPU-bound workload, where the graphics card’s rendering throughput is the limiting factor.

The CPU’s role becomes more apparent when examining the differences between presets at the same resolution. At 1080p, the gap between Low and Ultra is 178.8 FPS, which is substantial. However, the CPU is capable of feeding the GPU enough data to reach 360.2 FPS at Low settings, indicating that it is not a bottleneck at this resolution. At 4K, the gap between Low and Ultra narrows to 68.8 FPS, further confirming that the GPU is the primary constraint.

The Ryzen 7 7700’s benchmark scores, such as a Cinebench R23 multicore score of 18,760 and a single-core score of 1,930, suggest strong processing power. The 3DMark 16-thread score of 8,484 and single-thread score of 1,049 indicate that the CPU can handle both multi-threaded and lightly-threaded workloads effectively. In Fivem, which is a multiplayer mod that often relies on single-thread performance for game logic, the CPU’s single-core strength is likely sufficient to avoid becoming a limiting factor until frame rates reach the very high values seen at 1080p.

At 4K, the data points to the GPU as the clear bottleneck. The RTX 4090, despite its 82.58 TFLOPS of FP32 performance and 1.01 TB/s memory bandwidth, cannot maintain the same frame rates as at lower resolutions due to the sheer pixel count. The CPU’s workload does not increase with resolution, so its performance remains constant while the GPU’s output drops.

The Verdict

This PC can run Fivem with playable frame rates at every resolution and preset combination tested. The verdict data confirms that all four settings—Low, Medium, High, and Ultra—are playable at each resolution, meaning they all exceed the 60 FPS threshold.

At 1920x1080, the system is overwhelmingly capable, with the Ultra preset averaging 181.4 FPS. This is far beyond the playable threshold and provides an extremely smooth experience. At 2560x1440, Ultra averages 119.2 FPS, which still offers excellent headroom. At 3840x2160, Ultra averages 63.7 FPS, which is the only configuration that comes close to the threshold. While it does clear 60 FPS, the margin is slim, and users who want more stability might prefer High settings at 84.2 FPS.

The overall verdict is that this combination is more than sufficient for Fivem at all tested settings. The only caveat is 4K Ultra, where the frame rate is playable but leaves little room for dips. For competitive play or high-refresh-rate monitors, the 1080p and 1440p results are exceptional, with even the most demanding presets delivering frame rates well above 100 FPS.

FAQ

Q: What is the highest average FPS this combo achieves in Fivem?

A: The highest measured average FPS is 360.2, achieved at 1920x1080 with Low settings.

Q: Can this system run Fivem at 4K Ultra settings?

A: Yes, the 3840x2160 Ultra preset averages 63.7 FPS, which is above the 60 FPS playable threshold, though the margin is narrow.

Q: How does the combo rank among all tested configurations?

A: The AMD Ryzen 7 7700 and NVIDIA GeForce RTX 4090 combination ranks 114th out of 3,707 tested combos in Fivem.

Q: Which is more important for performance in Fivem, the CPU or the GPU?

A: The data shows the GPU is the primary factor, as frame rates drop significantly with increasing resolution, from 181.4 FPS at 1080p Ultra to 63.7 FPS at 4K Ultra.

Q: Are there any settings where the frame rate drops below 60 FPS?

A: No, all tested settings at all three resolutions exceed 60 FPS. The lowest recorded average is 63.7 FPS at 4K Ultra.

Q: What is the average benchmark score for the CPU and GPU?

A: The CPU has an average benchmark score of 40,081, while the GPU has an average score of 60,347.