Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

72%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
168 FPS
Ultra 1080p Measured
82 FPS

1440p (2K / QHD)

Low 1440p Measured
110 FPS
Ultra 1440p Measured
54 FPS

4K (Ultra HD)

Low 4K Measured
61 FPS
Ultra 4K Measured
30 FPS
9.4ms Frame Time
14ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 27,896
Graphics Card
Required 27,716
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 30 39 48 61
1440p QHD 54 70 87 110
1080p Full HD 82 106 132 168

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 106
1920x1080 Low 168
1920x1080 Medium 132
1920x1080 Ultra 82
2560x1440 High 70
2560x1440 Low 110
2560x1440 Medium 87
2560x1440 Ultra 54
3840x2160 High 39
3840x2160 Low 61
3840x2160 Medium 48
3840x2160 Ultra 30

Performance Analysis: Fivem on Your System

This analysis covers the AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce RTX 5050 for running Fivem. Measured performance data shows the system can handle the game at 1920x1080 and 2560x1440 with high settings, but at 3840x2160 only the Low preset reaches the 60 FPS playable threshold. The combination ranks 2275th out of 3707 tested combos, placing it in the lower half of the database. The CPU sits in the 80th percentile of all processors, while the GPU is in the 66th percentile, suggesting the graphics card is the weaker link in this pairing.

FAQ

Q: What is the highest preset that stays above 60 FPS at 2560x1440?

A: The High preset achieves an average of 70 FPS at 2560x1440, which is the most demanding setting that clears the 60 FPS threshold at that resolution. Medium runs at 87 FPS and Low at 110 FPS, but Ultra drops to 54 FPS.

Q: Does the RTX 5050 have enough memory for Fivem?

A: The GPU has 8 GB of GDDR6 memory with a 128-bit bus and 320.0 GB/s bandwidth. The measured FPS data does not include memory usage, so no direct conclusion about VRAM capacity is possible from this dataset.

Q: What is the CPU's L3 cache size?

A: The AMD Ryzen 7 5800X3D has 96 MB of shared L3 cache, which is a key feature of the 3D V-Cache design. The CPU also has 64 KB L1 per core and 512 KB L2 per core.

Q: What is the CPU's single-thread performance?

A: The CPU scores 884 in the 3dMark single-thread test and 3234 in Passmark single-thread. Its Cinebench R23 single-core score is 1452.

Q: What is the GPU's percentile ranking?

A: The NVIDIA GeForce RTX 5050 ranks in the 66th percentile of all GPUs, based on its average benchmark score of 21035.

Q: What were the launch MSRPs of these components?

A: The CPU had a launch MSRP of $449, and the GPU had a launch MSRP of 249 USD.

Similar Performance Alternatives

The Ryzen 7 5800X3D's average benchmark score is 27896. Its nearest rivals, all within 0.3% of that score, are the AMD Ryzen 7 6800U (27887, deltaPct 0), the Intel Core i9-10900K (27872, deltaPct 0.1), the AMD Ryzen AI 5 PRO 340 (27932, deltaPct -0.1), and the Intel Core i5-12600KF (27799, deltaPct 0.3). These CPUs should deliver nearly identical compute performance in synthetic workloads, though game-specific behavior can vary due to cache layout and architecture differences.

On the GPU side, the RTX 5050's average score is 21035. Its nearest rivals are the AMD Radeon RX Vega M GL (21153, deltaPct -0.6), the AMD Radeon HD 8970M (21237, deltaPct -1), the AMD Radeon RX 5600 XT (20713, deltaPct 1.6), and the NVIDIA RTX A4000 Mobile (21379, deltaPct -1.6). All are within 1.6% of the RTX 5050's average score, so they would behave similarly in pure GPU compute benchmarks. In practice, the RTX 5050's 8 GB GDDR6 memory and Blackwell 2.0 architecture may give it an edge in titles that leverage newer features, but the raw scores are close.

CPU and GPU Roles

The measured FPS data reveals how the balance shifts across resolutions. At 1920x1080, the system delivers 168 FPS on Low, 132 on Medium, 106 on High, and 82 on Ultra. The drop from Low to Ultra is 86 FPS, a 51% reduction. At 3840x2160, the same settings produce 61, 48, 39, and 30 FPS respectively—a drop of 31 FPS, also about 51%. The proportional scaling is similar, but the absolute numbers at 4K are far lower, indicating that the GPU is the primary constraint as pixel count increases.

The CPU's strong multi-threaded scores (14317 in Cinebench R23, 28309 in Passmark multi-thread) and its 80th percentile ranking suggest it has ample headroom to feed the GPU at lower resolutions. At 1080p, the GPU is likely the limiting factor even on Low, since the CPU can push 168 FPS without breaking a sweat. At 4K, the GPU is clearly the bottleneck—even the Low preset only reaches 61 FPS, and Ultra falls to 30 FPS. The 1440p results sit in between: High holds 70 FPS, but Ultra drops to 54, just under the playable threshold.

This pattern points to a system where the CPU is more than adequate for Fivem at any resolution, while the GPU determines the achievable settings. The 8-core, 16-thread CPU with a 96 MB L3 cache is well-suited for multiplayer titles that rely on many concurrent threads, but the RTX 5050's 8 GB memory and 128-bit bus limit its ability to handle high presets at 4K.

The Verdict

Can this PC run Fivem? Yes, but with clear limitations. According to the verdict data, the system clears 60 FPS at the following resolutions and presets:

  • 3840x2160: Only the Low preset is playable, with an average of 61 FPS. Medium (48), High (39), and Ultra (30) all fall below 60.
  • 2560x1440: High (70 FPS), Medium (87 FPS), and Low (110 FPS) are playable. Ultra drops to 54 FPS, just missing the threshold.
  • 1920x1080: All presets are playable, including Ultra at 82 FPS, High at 106 FPS, Medium at 132 FPS, and Low at 168 FPS.

The best playable setting at each resolution is the most demanding preset that still maintains at least 60 FPS: Low at 4K, High at 1440p, and Ultra at 1080p.

Measured FPS Breakdown

The table below lists every measured configuration from the dataset. Note that only the Medium preset includes min and max FPS values; other presets have no recorded min/max.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 39 | — | — |

| 3840x2160 | Low | 61 | — | — |

| 3840x2160 | Medium | 48 | 41 | 56 |

| 3840x2160 | Ultra | 30 | — | — |

| 2560x1440 | High | 70 | — | — |

| 2560x1440 | Low | 110 | — | — |

| 2560x1440 | Medium | 87 | 74 | 100 |

| 2560x1440 | Ultra | 54 | — | — |

| 1920x1080 | High | 106 | — | — |

| 1920x1080 | Low | 168 | — | — |

| 1920x1080 | Medium | 132 | 112 | 152 |

| 1920x1080 | Ultra | 82 | — | — |

The Medium preset at each resolution shows a consistent spread: at 4K the range is 41–56 FPS, at 1440p it is 74–100 FPS, and at 1080p it is 112–152 FPS. This suggests that even within a single preset, frame pacing can vary noticeably, particularly at lower resolutions where the CPU has more influence.

Best Settings per Resolution

For each resolution, the optimal configuration balances visual quality with the 60 FPS playable threshold.

  • 3840x2160: The best settings are Low, with an average of 61 FPS. This is the only preset that reaches the threshold. Medium, High, and Ultra all fall short, so users targeting 4K must accept the lowest visual quality to maintain playable frame rates.
  • 2560x1440: The best settings are High, with an average of 70 FPS. This preset offers a good balance of quality and performance. Medium and Low also clear 60 FPS, but High provides the most detail without dipping below the threshold. Ultra fails at 54 FPS.
  • 1920x1080: The best settings are Ultra, with an average of 82 FPS. All presets exceed 60 FPS, so there is no need to compromise on quality. Ultra delivers the highest fidelity while still leaving headroom for occasional drops, as the minimum FPS is not recorded but the average is well above the threshold.

These recommendations are based solely on the measured data. The system is capable of running Fivem smoothly at 1080p and 1440p with high settings, and at 4K only on the lowest preset. For players who prioritize frame rate over visuals, the 1440p Medium or 1080p Ultra settings offer the best combination of smoothness and detail.