Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

62%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
191 FPS
Ultra 1080p Measured
92 FPS

1440p (2K / QHD)

Low 1440p Measured
123 FPS
Ultra 1440p Measured
61 FPS

4K (Ultra HD)

Low 4K Measured
69 FPS
Ultra 4K Measured
32 FPS
8.2ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 24,709
Graphics Card
Required 27,716
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 46 51 69
1440p QHD 61 80 97 123
1080p Full HD 92 122 151 191

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 122
1920x1080 Low 191
1920x1080 Medium 151
1920x1080 Ultra 92
2560x1440 High 80
2560x1440 Low 123
2560x1440 Medium 97
2560x1440 Ultra 61
3840x2160 High 46
3840x2160 Low 69
3840x2160 Medium 51
3840x2160 Ultra 32

Performance Analysis: Fivem on Your System

The AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 4060 pairing delivers a wide range of frame rates in Fivem, scaling from a demanding 32 FPS at 4K Ultra to a fluid 191.4 FPS at 1080p Low. The data shows that this combination is highly capable at mainstream resolutions, but requires settings adjustments to maintain smooth gameplay at higher pixel counts. The measured results reveal a clear performance hierarchy tied directly to both resolution and graphical preset.

Measured FPS Breakdown

At 3840x2160 (4K), the data shows the RTX 4060 struggling with the highest settings. The Ultra preset produces an average of 32 FPS, which falls well below the 60 FPS playability threshold. Dropping to High raises the average to 45.7 FPS, while the Medium preset achieves 51.4 FPS. Only the Low preset at 4K breaks past the target, delivering a playable 69.2 FPS average. This represents a dramatic swing of 37.2 FPS between Ultra and Low at 4K, indicating that the GPU's 8 GB memory and 128-bit bus face significant pressure at this resolution.

Moving to 2560x1440 (1440p), the performance picture improves substantially. The Ultra preset averages 61 FPS, just clearing the 60 FPS bar. High settings reach 80.4 FPS, Medium hits 96.6 FPS, and Low produces 122.7 FPS. The scaling from 4K Ultra to 1440p Ultra shows a 29 FPS improvement, highlighting how pixel count directly impacts this GPU. The spread between presets at 1440p is 61.7 FPS, from 61 at Ultra to 122.7 at Low.

At 1920x1080 (1080p), the combo excels across all settings. The Ultra preset delivers 91.6 FPS, which is more than 50% above the playability threshold. High settings reach 121.6 FPS, Medium hits 150.5 FPS, and the Low preset peaks at 191.4 FPS. The performance gap between 1080p Low and 1440p Low is 68.7 FPS, demonstrating that even at lower presets, resolution scaling remains significant. The difference between 1080p Ultra and 4K Ultra is 59.6 FPS, showing the steep cost of 4K rendering on this hardware.

CPU and GPU Roles

The benchmark data suggests that the GPU becomes the primary bottleneck at higher resolutions, while the CPU's strong multi-threaded performance supports high frame rates at lower settings. The Ryzen 7 5700X3D, with its 8 cores and 16 threads, posts a Cinebench R23 multi-core score of 22366 and a single-core score of 3157. This processing power likely prevents CPU limitations from capping frame rates, especially at 1080p where the RTX 4060 is less stressed.

Evidence for GPU-bound behavior comes from the resolution scaling. At Low settings, the average FPS drops from 191.4 at 1080p to 122.7 at 1440p, then to 69.2 at 4K. This consistent decline aligns with the GPU's rendering load increasing with pixel count. The RTX 4060's FP32 throughput of 15.11 TFLOPS and memory bandwidth of 272.0 GB/s appear sufficient for 1080p and 1440p gaming, but the 4K Ultra result of 32 FPS indicates a hard ceiling.

The CPU's role becomes more apparent when examining preset scaling at a fixed resolution. At 1080p, moving from Low to Ultra costs 99.8 FPS on average, but the CPU's single-thread performance likely keeps minimum frame rates stable. The Ryzen 7 5700X3D's PassMark single-thread score of 2970 and 3DMark single-thread score of 804 suggest adequate headroom for Fivem's multiplayer workloads. The L3 cache of 96 MB shared across 8 cores may help with the game's open-world data streaming, though the data does not isolate this effect.

Similar Performance Alternatives

The CPU's nearest rivals show that the Ryzen 7 5700X3D sits in a tightly contested performance band. The AMD Ryzen 5 7600X3D scores 24728, which is 0.1% lower than the 5700X3D's 24709 average benchmark score. This indicates that users could expect nearly identical CPU-bound behavior from these two parts. The AMD Ryzen 9 5900HX, a mobile chip, scores 24822, outperforming the 5700X3D by 0.5%. The Intel Core i5-12450HX scores 24576, trailing by 0.5%, while the Intel Core i5-11600 scores 24563, a 0.6% deficit.

For the GPU, the nearest rivals present an interesting contrast. The AMD Radeon HD 7790 scores 17666, just 0.2% above the RTX 4060's 17639 average. However, this comparison is misleading given the generational gap and architectural differences. The AMD Radeon 780M integrated graphics score 17588, which is 0.3% lower, suggesting that the RTX 4060's discrete performance is only marginally ahead of a modern integrated solution in synthetic benchmarks. The AMD Radeon Pro 560 scores 17551 (0.5% lower) and the Radeon Pro 460 scores 17509 (0.7% lower). These GPU rivals indicate that the RTX 4060's raw compute performance has close competitors, though Fivem-specific results would likely favor the NVIDIA card due to driver optimizations.

How This Combo Ranks

The combination ranks 1987 out of 3707 tested combos in Fivem, placing it in the 46th percentile of all tested systems. This mid-pack ranking reflects the RTX 4060's position as a 61st percentile GPU overall, while the CPU sits at the 77th percentile against all CPUs. The discrepancy between CPU and GPU percentiles suggests that the graphics card limits this combo's overall standing in Fivem. The CPU's average benchmark score of 24709 is strong, but the GPU's 17639 average score drags the pair down in game-specific rankings. This rank of 1987 indicates that many combinations with higher-end GPUs outperform this setup, despite the capable CPU.

The Verdict

The data clearly shows that this PC can run Fivem above 60 FPS at 1080p and 1440p across all tested presets. At 1920x1080, all four presets—Low, Medium, High, and Ultra—exceed the 60 FPS threshold, with Ultra achieving 91.6 FPS. At 2560x1440, the same is true: Low hits 122.7 FPS, Medium reaches 96.6 FPS, High delivers 80.4 FPS, and Ultra just clears the bar at 61 FPS. The verdict is less favorable at 3840x2160, where only the Low preset is playable at 69.2 FPS. The Medium preset at 51.4 FPS and High at 45.7 FPS fall short, while Ultra at 32 FPS is far from smooth. Therefore, this combo is fully capable of 60+ FPS gaming at 1080p and 1440p with maximum settings, but 4K users must compromise with Low settings.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains 60+ FPS is Ultra, which achieves 91.6 FPS. This provides a comfortable margin above the threshold, leaving headroom for multiplayer fluctuations. At 2560x1440, Ultra again is the best playable setting, but it barely reaches 61 FPS. This slim margin means that any demanding scene could dip below 60 FPS, though the average data supports this choice. For 3840x2160, the only playable preset is Low, which delivers 69.2 FPS. Users seeking higher visual fidelity at 4K would need to accept sub-60 FPS performance, as the next step up (Medium) only reaches 51.4 FPS.

FAQ

Q: Can this PC run Fivem at 1080p with maximum settings?

A: Yes, the Ultra preset at 1920x1080 achieves an average of 91.6 FPS, well above the 60 FPS playability threshold.

Q: What is the highest playable preset at 1440p?

A: Ultra at 2560x1440 averages 61 FPS, which just clears the 60 FPS threshold, making it technically playable.

Q: Is 4K gaming viable with this hardware?

A: Only at Low settings, which produces 69.2 FPS. The Medium preset drops to 51.4 FPS, and Ultra falls to 32 FPS, both below the 60 FPS target.

Q: How does the Ryzen 7 5700X3D compare to its closest CPU rival?

A: The AMD Ryzen 5 7600X3D scores 24728, which is only 0.1% higher than the 5700X3D's 24709 average, indicating near-identical CPU performance.

Q: What GPU is closest in performance to the RTX 4060?

A: The AMD Radeon HD 7790 scores 17666, just 0.2% above the RTX 4060's 17639 average benchmark score, though real-world gaming results may differ.

Q: What rank does this combo hold among tested systems?

A: It ranks 1987 out of 3707 total combos tested in Fivem, placing it in the middle of the distribution.