Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 67 | 87 | 109 | 138 |
| 1440p QHD | 122 | 157 | 196 | 248 |
| 1080p Full HD | 185 | 238 | 266 | 289 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 pairing delivers a remarkably wide performance envelope for Fivem, with benchmark results showing the RTX 5090 dominating the GPU-side workload while the Ryzen 7 5700G’s 8-core, 16-thread Zen 3 architecture keeps pace. The data indicates this combination can push even the most demanding presets well past the 60 FPS threshold across all tested resolutions, though the gap between low and ultra settings narrows as resolution climbs.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 185 FPS. The measured data shows a clear scaling pattern: Low settings reach 289 FPS, Medium hits 266 FPS, and High produces 238 FPS. Since even the heaviest preset more than triples the playable threshold, there is no reason to compromise on visual fidelity at this resolution.
Moving to 2560x1440, Ultra again remains the best choice, averaging 122 FPS. The drop from 1080p is substantial but not problematic — the RTX 5090’s 32 GB GDDR7 memory and 1.79 TB/s bandwidth clearly absorb the extra pixel workload. High settings average 157 FPS, Medium 196 FPS, and Low 248 FPS, so every preset comfortably exceeds the 60 FPS floor.
At 3840x2160, the situation becomes more interesting. Ultra still stays above 60 FPS with an average of 67 FPS, making it the highest-fidelity option that clears the threshold. However, the margin is thinner than at lower resolutions — the 67 FPS average sits only 7 FPS above the playable limit. High settings average 87 FPS, Medium 109 FPS, and Low 138 FPS. For players who prioritize smoothness over maximum detail at 4K, dropping to High provides a 20 FPS buffer over Ultra while still delivering strong visual quality. The data suggests Ultra at 4K is viable but leaves less headroom for demanding multiplayer scenes.
CPU and GPU Roles
The benchmark results reveal a GPU-bound workload that becomes more pronounced at higher resolutions. Comparing the scaling from 1920x1080 to 2560x1440 at Ultra settings, the average FPS drops from 185 to 122 — a 34% reduction in frame rate for a 78% increase in pixel count. This disproportionate drop indicates the RTX 5090 is the primary performance driver, as the GPU must process significantly more fragments and texture data.
At 3840x2160, the Ultra preset averages 67 FPS, which is 55% lower than the 1440p result and 64% lower than the 1080p result. The pixel count quadruples from 1080p to 4K, yet the frame rate only drops by roughly two-thirds. This non-linear scaling suggests the Ryzen 7 5700G’s 16 threads provide sufficient CPU throughput to feed the GPU even at 4K, though the CPU’s influence becomes relatively smaller as resolution increases.
The Ryzen 7 5700G’s benchmark scores put it in the 79th percentile of all CPUs, with an average benchmark score of 27051. Its nearest rival, the Intel Core i9-9900K, scores 27097 (0.2% higher), indicating the CPU is competitive for mid-range desktop parts. However, the RTX 5090 sits in the 92nd percentile of GPUs with an average score of 79842, making it the clear bottleneck-reliever in this pairing. At 1080p, where CPU overhead matters more, the 5700G’s 16 threads help maintain high frame rates (289 FPS at Low), but even here the GPU’s raw power dominates the final output.
The measured FPS data shows that lowering settings from Ultra to Low at 1080p increases FPS from 185 to 289 — a 56% improvement. At 1440p, the same settings change yields a 103% improvement (122 to 248 FPS). At 4K, the improvement is 106% (67 to 138 FPS). This widening gap with resolution confirms that GPU load scales faster than CPU load, making the RTX 5090 the deciding factor as pixel count rises.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the AMD Ryzen 7 5700G performs nearly identically to several other processors. The Intel Core i9-9900K averages 27097 points, just 0.2% higher than the 5700G’s 27051. The AMD Ryzen AI 7 445 scores 26936 (0.4% lower), and the Intel Core i5-14400T scores 27166 (0.4% higher). The Intel Core i7-1370P rounds out the group at 26900 (0.6% lower). For Fivem, any of these CPUs would deliver similar CPU-bound performance, meaning the frame rate differences between them would be minimal and the RTX 5090 would remain the dominant factor.
On the GPU side, the RTX 5090’s nearest rivals are somewhat surprising given its flagship status. The NVIDIA Tesla P100 PCIe 16 GB scores 79605 (0.3% lower), the Tesla P100 PCIe 12 GB scores 79396 (0.6% lower), and the AMD Radeon RX 6850M XT scores 78940 (1.1% lower). The AMD Radeon Pro Vega 64X scores 80959 (1.4% higher). These are primarily workstation or mobile parts, but the benchmark data suggests that in Fivem’s workload, a system with one of these GPUs would produce similar frame rates — within roughly 1-2% of the RTX 5090’s performance. However, the RTX 5090’s 32 GB GDDR7 memory and 512-bit bus give it a substantial bandwidth advantage (1.79 TB/s) that could matter in texture-heavy multiplayer scenarios, even if the average benchmark scores are close.
The Verdict
Can this PC run Fivem? The data unequivocally says yes — at every resolution and preset tested, the average FPS stays above 60. At 1920x1080, the best playable setting is Ultra with 185 FPS, providing an enormous margin over the 60 FPS threshold. At 2560x1440, Ultra averages 122 FPS, still more than double the playable requirement. At 3840x2160, Ultra averages 67 FPS, which clears the bar but with less headroom — 7 FPS above the threshold.
The verdict by resolution confirms all three resolutions have all four settings (Low, Medium, High, Ultra) listed as playable. The best settings are Ultra at every resolution, with average FPS of 185 at 1080p, 122 at 1440p, and 67 at 4K. The RTX 5090’s 92nd percentile GPU ranking and the Ryzen 7 5700G’s 79th percentile CPU ranking combine to create a system that not only runs Fivem but runs it at maximum settings across the board.
There is a caveat worth noting: the 4K Ultra result (67 FPS) leaves little room for frame rate dips during intense multiplayer events. The measured data only includes min/max values for Medium settings (92 FPS min and 125 FPS max at 4K), so Ultra’s minimum frame rate is unknown. Players who experience stutter-sensitive gameplay might prefer High settings at 4K (87 FPS) for a safer buffer. At lower resolutions, the margins are so large that even worst-case dips would likely stay above 60 FPS.
FAQ
Q: Can this system run Fivem at 4K Ultra settings?
A: Yes. The measured average FPS at 3840x2160 with Ultra settings is 67 FPS, which exceeds the 60 FPS playable threshold. However, the margin is only 7 FPS, so high-detail multiplayer scenes could potentially cause dips below 60.
Q: What is the highest FPS achievable with this combination?
A: The highest measured average FPS is 289 at 1920x1080 with Low settings. Medium at 1080p averages 266 FPS, and High averages 238 FPS.
Q: How much faster is this system at 1080p compared to 4K?
A: At Ultra settings, 1920x1080 averages 185 FPS, while 3840x2160 averages 67 FPS. The 1080p result is roughly 2.8 times higher than the 4K result.
Q: Does the CPU or GPU matter more for Fivem performance?
A: The GPU matters more, especially at higher resolutions. The RTX 5090 sits in the 92nd percentile of GPUs, while the Ryzen 7 5700G is in the 79th percentile of CPUs. Frame rate drops by 64% from 1080p to 4K at Ultra settings, indicating GPU scaling dominates.
Q: What CPU would perform similarly to the Ryzen 7 5700G in this game?
A: The Intel Core i9-9900K (0.2% higher average score), Intel Core i5-14400T (0.4% higher), AMD Ryzen AI 7 445 (0.4% lower), and Intel Core i7-1370P (0.6% lower) all have near-identical benchmark scores.
Q: Is there any resolution where this system fails to reach 60 FPS?
A: No. All four settings (Low, Medium, High, Ultra) at all three resolutions (1080p, 1440p, 4K) maintain average FPS above 60. The lowest recorded average is 67 FPS at 4K Ultra.
How This Combo Ranks
Among the 3707 tested CPU-GPU combinations in the database, this pairing of AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5090 ranks 139th for Fivem. That places it in the top 3.7% of all tested systems, which aligns with the strong measured performance — every preset at every resolution clears the playable threshold. The ranking reflects the GPU’s dominant contribution; the RTX 5090’s 92nd percentile score (79842 average) propels the combo upward despite the CPU’s more modest 79th percentile standing.
The rank of 139 out of 3707 means there are 138 faster combinations, likely featuring higher-end CPUs paired with similarly powerful GPUs. However, the practical difference in Fivem is minimal at 1080p and 1440p, where the GPU is the limiting factor. At 4K Ultra, the 67 FPS result is still playable, so the ranking gap to the top systems would primarily manifest as smoother 4K high-refresh gameplay rather than basic playability.
Measured FPS Breakdown
1920x1080:
- Low: 289 FPS average
- Medium: 266 FPS average, 226 FPS minimum, 305 FPS maximum
- High: 238 FPS average
- Ultra: 185 FPS average
2560x1440:
- Low: 248 FPS average
- Medium: 196 FPS average, 166 FPS minimum, 225 FPS maximum
- High: 157 FPS average
- Ultra: 122 FPS average
3840x2160:
- Low: 138 FPS average
- Medium: 109 FPS average, 92 FPS minimum, 125 FPS maximum
- High: 87 FPS average
- Ultra: 67 FPS average
The data shows consistent behavior across resolutions — each step from Low to Ultra reduces FPS by roughly 15-25%, with the largest relative drop occurring between High and Ultra at 4K (87 to 67 FPS, a 23% decrease). The min/max values for Medium settings provide insight into frame pacing: at 1080p, the range spans 226 to 305 FPS (a 79 FPS spread), while at 4K it spans 92 to 125 FPS (a 33 FPS spread). This tighter range at higher resolutions suggests the GPU’s workload becomes more consistent as the CPU’s role diminishes.