Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

86%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
289 FPS
Ultra 1080p Measured
180 FPS

1440p (2K / QHD)

Low 1440p Measured
242 FPS
Ultra 1440p Measured
119 FPS

4K (Ultra HD)

Low 4K Measured
135 FPS
Ultra 4K Measured
66 FPS
4.3ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 27,051
Graphics Card
Required 27,716
Your GPU 60,347

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 66 85 106 135
1440p QHD 119 153 191 242
1080p Full HD 180 232 266 289

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 232
1920x1080 Low 289
1920x1080 Medium 266
1920x1080 Ultra 180
2560x1440 High 153
2560x1440 Low 242
2560x1440 Medium 191
2560x1440 Ultra 119
3840x2160 High 85
3840x2160 Low 135
3840x2160 Medium 106
3840x2160 Ultra 66

Performance Analysis: Fivem on Your System

The benchmark data for the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4090 combination in Fivem shows a system with overwhelming performance headroom. Across every tested resolution, the most demanding preset (Ultra) not only clears the 60 FPS playability threshold but does so by a substantial margin. The pairing of a strong 8-core Zen 3 processor with the flagship Ada Lovelace GPU results in a setup where graphical settings are rarely a compromise, and the primary limiter becomes the game’s engine or the display’s refresh rate rather than hardware capability.

Best Settings per Resolution

At 3840x2160 (4K), the data shows that the Ultra preset is the highest playable setting, delivering an average of 66 FPS. This is a critical finding: even at 4K, the RTX 4090 has enough headroom to run the most demanding visual configuration above the 60 FPS target. The average of 66 FPS leaves minimal margin for fluctuation, but it is technically playable. Dropping to High increases the average to 85 FPS, providing a more comfortable buffer for demanding scenes, while Medium hits 106 FPS and Low reaches 135 FPS.

For 2560x1440, the Ultra preset remains the best setting, with the average jumping to 119 FPS. This is a significant improvement over 4K, indicating that the GPU is not the bottleneck at this resolution. The High preset runs at 153 FPS, Medium at 191 FPS, and Low at 242 FPS. The gap between Ultra and High here is 34 FPS, suggesting that the Ultra settings impose a substantial load, but the hardware still handles it effortlessly.

At 1920x1080, the Ultra preset produces an average of 180 FPS. This is far beyond the 60 FPS threshold and is likely limited by the CPU’s frame generation capability or the game’s engine thread management. The High preset reaches 232 FPS, Medium 266 FPS, and Low 289 FPS. Notably, the scaling from Low to Ultra at 1080p is only about 109 FPS, showing that the GPU has massive reserves even at the highest settings.

FAQ

Q: Can this PC run Fivem at 60 FPS on Ultra settings at 4K?

A: Yes, the measured data shows an average of 66 FPS at 3840x2160 with the Ultra preset, which is above the 60 FPS playable threshold.

Q: What is the best preset for 1440p gaming?

A: The Ultra preset is the best option, as it maintains an average of 119 FPS at 2560x1440, well above the playable threshold.

Q: Is the RTX 4090 overkill for 1080p in Fivem?

A: Benchmark results indicate an average of 180 FPS at 1080p on Ultra, and 289 FPS on Low, showing that the GPU is not fully utilized at this resolution.

Q: How does the Ryzen 7 5700G perform in multi-threaded scenarios relevant to Fivem?

A: The CPU scores 12,830.5 in Cinebench R23 multi-core and 24,419 in Passmark multithread, placing it in the 79th percentile of all CPUs.

Q: What is the minimum FPS recorded in any test?

A: The only min FPS values provided are for Medium settings: 90 at 4K, 163 at 1440p, and 226 at 1080p.

Q: Is the Ultra preset at 1080p significantly faster than 4K Ultra?

A: Yes, the average FPS at 1080p Ultra is 180, compared to 66 at 4K Ultra, a difference of 114 FPS.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings levels. At 3840x2160, the Low preset averages 135 FPS with no min/max data provided. Medium averages 106 FPS with a minimum of 90 and maximum of 122. High averages 85 FPS, and Ultra averages 66 FPS. The trend shows a consistent decline from Low to Ultra, with the step from Low to Medium being a 29 FPS drop, and from Medium to High a 21 FPS drop, followed by a 19 FPS drop from High to Ultra.

Moving to 2560x1440, the Low preset averages 242 FPS. Medium averages 191 FPS with a minimum of 163 and maximum of 220. High averages 153 FPS, and Ultra averages 119 FPS. The delta between Low and Ultra is 123 FPS, demonstrating that resolution scaling is more impactful at this tier than at 4K.

At 1920x1080, the Low preset averages 289 FPS. Medium averages 266 FPS with a minimum of 226 and maximum of 305. High averages 232 FPS, and Ultra averages 180 FPS. The min FPS of 226 for Medium is still 166 FPS above the playable threshold, indicating that even the lowest frame dips are far beyond playable. The data shows that the RTX 4090’s performance is so high that the game’s frame rate becomes dependent on the CPU’s ability to feed the GPU, especially at lower resolutions where the GPU is not the bottleneck.

Similar Performance Alternatives

For the CPU, the nearest rival is the Intel Core i9-9900K, which has an average benchmark score of 27,097 compared to the Ryzen 7 5700G’s 27,051 — a delta of -0.2%. This indicates virtually identical performance. The AMD Ryzen AI 7 445 scores 26,936 (delta 0.4%), the Intel Core i5-14400T scores 27,166 (delta -0.4%), and the Intel Core i7-1370P scores 26,900 (delta 0.6%). All four rivals are within 1% of the Ryzen 7 5700G’s average score, meaning any of these chips would deliver nearly the same CPU-bound performance in Fivem. The Ryzen 7 5700G’s 8 cores and 16 threads are well-matched to the game’s multi-threaded workload, but the near-identical scores suggest that upgrading to any of these alternatives would yield no discernible difference.

On the GPU side, the Intel Arc Pro A60 is the closest match with a score of 60,326 (delta 0%). The AMD Radeon Pro Vega 48 scores 60,140 (delta 0.3%), the AMD Radeon Pro W6600M scores 61,896 (delta -2.5%), and the AMD Radeon PRO V710 scores 58,657 (delta 2.9%). The RTX 4090’s average benchmark score is 60,347, placing it in the 88th percentile of all GPUs. The delta values show that the Arc Pro A60 and Pro Vega 48 are effectively equal to the 4090 in synthetic benchmarks, which is surprising given the 4090’s premium positioning. However, these alternatives are likely workstation or professional cards with different driver optimizations. In Fivem, the measured FPS would be similar with any of these GPUs, as the game does not appear to stress the GPU heavily at 1080p or 1440p.

The Verdict

The verdict is unambiguous: this PC can run Fivem at 60 FPS or above on every settings preset at every resolution tested. At 3840x2160, the Ultra preset runs at 66 FPS, which is the lowest average recorded but still clears the threshold. The High preset at 85 FPS and Medium at 106 FPS offer more stability for 4K if the user prefers higher frame rates over maximum visual fidelity. At 2560x1440, the Ultra preset runs at 119 FPS, which is more than double the playable threshold, and the Low preset reaches 242 FPS, making this resolution the sweet spot for high-refresh-rate monitors. At 1920x1080, the Ultra preset runs at 180 FPS, and the Low preset hits 289 FPS, which is likely near the engine’s frame rate ceiling.

The data indicates that the RTX 4090 is the dominant component in this pairing. The Ryzen 7 5700G, while a capable 8-core processor, is not a bottleneck at 4K where the GPU load is highest, but at lower resolutions the CPU’s limits become apparent. For example, the jump from 1440p Ultra (119 FPS) to 1080p Ultra (180 FPS) shows a 61 FPS improvement, but the jump from 1080p High (232 FPS) to 1080p Low (289 FPS) is only 57 FPS, suggesting that the CPU’s per-core performance is the limiting factor. Regardless, the system never falls below the playable threshold, and the only reason to lower settings would be to chase extremely high refresh rates or to reduce GPU load for lower temperatures.

How This Combo Ranks

Among 3,707 tested hardware combinations in Fivem, this pairing of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 4090 ranks 168th. This places it in the top 4.5% of all tested combos, which is a strong showing. The rank reflects the overall frame rate capability across all tested scenarios. The high rank is primarily driven by the RTX 4090’s exceptional rasterization performance, as the CPU is only in the 79th percentile of all CPUs. While the Ryzen 7 5700G is not a top-tier processor, it provides enough single-thread and multi-thread performance to avoid holding the GPU back in most situations. The 168th rank out of 3,707 combos indicates that there are 167 other configurations that deliver higher average frame rates in Fivem, likely those pairing newer CPUs with the same GPU or using higher-end CPUs that can push even more frames at 1080p. However, for a 4K Ultra target, this combo is effectively overkill, as the 66 FPS at 4K Ultra is a high bar that few other combinations would surpass by a significant margin. The data shows that the combo’s rank is a reflection of its extreme performance ceiling, not a sign of any weakness.