Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 46 | 58 | 74 |
| 1440p QHD | 65 | 84 | 105 | 133 |
| 1080p Full HD | 99 | 127 | 159 | 201 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5060 combination delivers a robust experience in Fivem, with the data indicating that the CPU’s large L3 cache and the GPU’s Blackwell architecture work well together. The benchmark results show this pairing is capable of high refresh-rate gameplay at 1080p and smooth 60+ FPS performance at 1440p, while 4K remains a challenge for the most demanding presets. The following analysis breaks down the measured performance, component roles, and optimal settings based strictly on the provided data.
Similar Performance Alternatives
Looking at the benchmark database, the AMD Ryzen 5 7500X3D sits in the 89th percentile among all CPUs tested, with an average benchmark score of 44,573. Its nearest rivals in the synthetic tests are remarkably close, which suggests that users would see nearly identical CPU-bound behavior in Fivem from these alternatives. The Intel Core Ultra X9 388H scores 44,466, a margin of only 0.2% behind the Ryzen chip. Similarly, the Intel Core i9-13950HX trails by 0.5% with a score of 44,342, and the AMD Ryzen AI Max 385 is 0.6% behind at 44,309. On the other side, the Intel Core i5-14600 posts a score of 44,889, which is 0.7% ahead of the 7500X3D. For Fivem, where the data shows a strong reliance on single-threaded performance, any of these CPUs would likely produce frame rates within a couple of percent of each other, meaning the choice between them is more about platform features than raw gaming throughput.
On the GPU side, the NVIDIA GeForce RTX 5060 achieves a 72nd percentile ranking among all graphics cards, with an average benchmark score of 26,331. Its nearest rivals in the database are a mixed bag. The AMD Radeon 860M scores 26,401, which is 0.3% higher than the RTX 5060, while the NVIDIA GeForce MX550 matches that same 0.3% delta with a score of 26,421. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% ahead at 26,553, and the AMD Radeon RX 6750 XT is 1.2% behind at 26,011. In the context of Fivem, these synthetic deltas are small enough that the RTX 5060 and its closest rivals would likely produce indistinguishable average frame rates at the same settings. The practical takeaway is that if a builder already owns one of these alternative GPUs, upgrading to the RTX 5060 would not yield a measurable jump in Fivem performance based on the benchmark data.
CPU and GPU Roles
The measured FPS data reveals a clear pattern about which component dominates in Fivem. The game appears heavily CPU-limited, particularly at lower resolutions and higher frame rates. At 1920x1080 with Low settings, the combo produces an average of 201 FPS, while at 3840x2160 with Low settings, that figure drops to 74 FPS. This 127 FPS swing from 4K to 1080p at the same preset indicates that the GPU is the limiting factor when resolution scales up, but the extremely high 1080p numbers suggest the CPU is capable of feeding the GPU far more frames than it can render at higher resolutions.
Scaling between presets reinforces this interpretation. At 2560x1440, moving from Low (133 FPS average) to Ultra (65 FPS average) cuts performance by roughly half, which is a typical GPU-bound workload. However, the gap between Medium (105 FPS) and High (84 FPS) is 21 FPS, while the gap between High and Ultra is 19 FPS. This non-linear scaling hints that the CPU’s 96 MB of shared L3 cache helps maintain frame pacing in Fivem’s multiplayer environments, where many entities and scripts can spike CPU load. The RTX 5060’s role becomes more apparent at 4K, where the GPU’s 8 GB GDDR7 memory and 128-bit bus are taxed heavily; the drop from High (46 FPS average) to Ultra (36 FPS average) at 3840x2160 shows that the graphics card is the primary bottleneck at that resolution.
For a game like Fivem, which is built on a modified GTA V engine, the data strongly suggests that the Ryzen 5 7500X3D’s single-thread performance (Passmark single-thread score of 3,494) is the key asset. The CPU’s 6 cores and 12 threads are sufficient, and the large L3 cache likely mitigates the stutter that can occur in densely populated multiplayer servers. The GPU, while not the star at 1080p, becomes essential for maintaining 60 FPS at 1440p Ultra and for achieving playable frame rates at 4K Low.
How This Combo Ranks
In the database of tested combinations for Fivem, this specific pairing of the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 5060 holds the 1,637th rank out of 3,707 total combos. That places it in the 44th percentile of all tested systems, meaning roughly 56% of the tested configurations perform better in this game. This ranking is somewhat middling, which is surprising given the strong individual benchmark scores of both components. The explanation lies in Fivem’s peculiar performance profile: the game is known to be sensitive to CPU memory latency and cache behavior, and while the 7500X3D has a large L3 cache, its 4.00 GHz base and 4.50 GHz boost clocks are not extreme. The RTX 5060, while a modern GPU, is positioned against faster cards in the database, and the 8 GB memory capacity may limit its 4K performance in this title.
The rank of 1,637 out of 3,707 combos suggests that there are many systems with higher-end GPUs or CPUs that push past this configuration. However, in absolute terms, the measured FPS shows that this combo is far from weak. It clears the 60 FPS playable threshold at 1080p and 1440p across all presets, and only fails at 4K High and Ultra. The rank is a reflection of the competitive field, not a condemnation of the hardware. For a builder targeting high refresh rate 1080p or smooth 1440p gameplay in Fivem, this combo sits comfortably above the median in real-world performance, even if the synthetic ranking places it in the lower half.
The Verdict
The verdict by resolution is clear: this PC can run Fivem well at 1080p and 1440p, but 4K is only playable at the lowest preset. At 1920x1080, all four tested presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold. The best settings at this resolution are Ultra, which delivers an average of 99 FPS. At 2560x1440, the same story holds: Low, Medium, High, and Ultra are all playable, with Ultra averaging 65 FPS. This means a user can run the game at maximum quality at 1440p and still stay above the 60 FPS playable threshold. At 3840x2160, only the Low preset is playable, averaging 74 FPS. Medium at 4K drops to 58 FPS average, which is below the playable threshold, and High (46 FPS) and Ultra (36 FPS) are not viable for smooth gameplay.
For practical purposes, this combo is a 1080p and 1440p champion. The data shows that the playable threshold of 60 FPS is exceeded by a wide margin at those resolutions, giving headroom for multiplayer server overhead, which Fivem often incurs. At 4K, the recommendation is to stick with Low settings for a playable experience, or to consider dropping to a lower resolution for higher visual fidelity. The verdict is positive: this system is more than capable of running Fivem for the vast majority of players who use 1080p or 1440p monitors.
Measured FPS Breakdown
The measured FPS data provides a complete picture of performance across the three primary resolutions and four quality presets. At 1920x1080, the combo delivers an average of 201 FPS on Low, which is the highest frame rate recorded in the entire dataset. Medium settings produce an average of 159 FPS, with a minimum of 135 FPS and a maximum of 183 FPS. High settings average 127 FPS, and Ultra averages 99 FPS. Notably, the minimum FPS figures are only provided for Medium settings at each resolution, allowing a glimpse into frame pacing. At 1080p Medium, the 135 FPS minimum indicates that even in demanding scenes, the frame rate stays far above the playable threshold.
Moving to 2560x1440, the performance scales down predictably. Low settings average 133 FPS, which is still exceptionally high for a 1440p resolution. Medium averages 105 FPS, with a minimum of 89 FPS and a maximum of 120 FPS. High settings average 84 FPS, and Ultra averages 65 FPS. The Ultra figure is just 5 FPS above the playable threshold, so players who want to run 1440p at maximum quality should be aware that server-side lag or heavy script loads could occasionally push the frame rate below 60. At 3840x2160, the data shows a steep decline. Low settings average 74 FPS, which is playable but not as smooth as the lower resolutions. Medium averages 58 FPS, with a minimum of 49 FPS and a maximum of 67 FPS. This minimum of 49 FPS is concerning for a game like Fivem, where multiplayer interactions can cause sudden frame drops. High settings average 46 FPS, and Ultra averages 36 FPS, both of which are well below the playable threshold.
The pattern in the data is consistent: the RTX 5060’s 8 GB memory and 128-bit bus create a hard ceiling at 4K, while the Ryzen 5 7500X3D’s strong single-thread performance keeps frame rates high at 1080p and 1440p. The minimum FPS figures, where available, show that the system does not suffer from severe stuttering in the Medium preset, which is a positive sign for multiplayer stability.
Best Settings per Resolution
For each resolution, the best settings are the most demanding preset that maintains an average FPS at or above the 60 FPS playable threshold. At 1920x1080, the answer is Ultra, with an average of 99 FPS. This is the highest quality preset available, and the system has 39 FPS of headroom above the threshold. Players can run Fivem at maximum settings at 1080p without worrying about frame rate drops in most scenarios. At 2560x1440, the best settings are also Ultra, which averages 65 FPS. This is a tighter margin, with only 5 FPS of headroom, but it still clears the threshold. For players with 1440p monitors who want the best visual experience, Ultra is the recommended choice, though they may want to consider High (84 FPS average) if they prefer a larger safety margin for multiplayer chaos.
At 3840x2160, the best settings are Low, with an average of 74 FPS. This is the only preset that maintains 60 FPS or above at 4K. Medium, with an average of 58 FPS, is not playable by the defined threshold, and the minimum of 49 FPS makes it a risky choice for a smooth experience. The recommendation for 4K is clear: use Low settings to stay playable, or reduce the resolution to 1440p to enjoy higher quality presets. The data does not support any other conclusion for 4K gamers. In summary, this combo is a 1080p and 1440p powerhouse, with 4K limited to the lowest settings for playability.