Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 34 | 44 | 54 | 69 |
| 1440p QHD | 61 | 78 | 98 | 124 |
| 1080p Full HD | 92 | 119 | 149 | 189 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
This analysis examines the measured performance of the AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4060 combination in Fivem, based exclusively on the provided benchmark data. The following sections detail the component synergy, frame rates across settings and resolutions, and the overall viability of this build for the game.
FAQ
Q: What is the highest average frame rate this combo achieves at 1920x1080?
A: At 1920x1080 with Low settings, the combination reaches an average of 189 FPS. The Ultra preset still delivers a robust 92 FPS average at this resolution.
Q: Is the RTX 4060's performance in this game close to any integrated graphics solution?
A: Yes, benchmark data shows the RTX 4060's average score is 17639, which is only 0.3% different from the AMD Radeon 780M's average score of 17588. This indicates the discrete GPU's advantage is marginal in synthetic tests, though the measured FPS in Fivem may tell a different story.
Q: How does the Ryzen 5 7500X3D compare to its nearest CPU rival in terms of average benchmark score?
A: The Ryzen 5 7500X3D has an average benchmark score of 44573. Its closest rival, the Intel Core Ultra X9 388H, scores 44466, which is a delta of 0.2%. The Intel Core i5-14600 scores 44889, putting it 0.7% ahead of the 7500X3D.
Q: Can this system run Fivem at 3840x2160 with Medium settings while maintaining 60 FPS?
A: No. At 3840x2160 with Medium settings, the measured average FPS is 54, with a minimum of 46 and a maximum of 63. This falls short of the 60 FPS playable threshold. Only the Low preset at this resolution clears the threshold, with an average of 69 FPS.
Q: What is the combo's overall rank among tested systems for Fivem?
A: This CPU and GPU pairing ranks 1993 out of 3707 tested combos for Fivem. This places it in the lower-middle portion of the performance distribution.
Q: Does the CPU's single-thread performance indicate a bottleneck risk for this game?
A: The Ryzen 5 7500X3D's PassMark single-thread score is 3494, which is identical to its singlethread score. This is a high value, suggesting strong per-core capability, which is often relevant for multiplayer game logic.
How This Combo Ranks
The Ryzen 5 7500X3D and RTX 4060 combination achieves a rank of 1993 out of 3707 tested combos in Fivem. This means the pairing sits in the 46th percentile of all tested systems, meaning more than half of the tested configurations deliver higher average frame rates in this specific title. The data indicates this is a mid-pack performer, not a top-tier configuration for Fivem, but it is far from the bottom of the field.
The rank reflects a balance between the CPU's strong position and the GPU's more modest standing. The Ryzen 5 7500X3D sits in the 89th percentile among all CPUs, with an average benchmark score of 44573. In contrast, the RTX 4060's percentile is 61 among all GPUs, with an average score of 17639. The GPU's lower percentile drags the overall combo rank down relative to what the CPU alone might suggest. For a game like Fivem, which can be sensitive to both CPU and GPU load depending on the scene, this combination produces a playable but not exceptional experience at higher resolutions.
Similar Performance Alternatives
For the CPU, the nearest rivals by average benchmark score are the Intel Core Ultra X9 388H (44466, 0.2% faster), Intel Core i9-13950HX (44342, 0.5% faster), and AMD Ryzen AI Max 385 (44309, 0.6% faster). The Intel Core i5-14600 is 0.7% slower than the 7500X3D with a score of 44889. These processors would deliver nearly identical CPU-bound performance in Fivem, meaning any differences in frame rates would likely come from the GPU.
For the GPU, the RTX 4060's nearest rivals are the AMD Radeon HD 7790 (17666, 0.2% faster), AMD Radeon 780M (17588, 0.3% slower), AMD Radeon Pro 560 (17551, 0.5% slower), and AMD Radeon Pro 460 (17509, 0.7% slower). The Radeon 780M is an integrated GPU, so pairing a similar CPU with that iGPU would likely produce lower absolute FPS than the discrete RTX 4060, but the synthetic scores suggest the gap is not huge. Any of these GPU alternatives would place the system in a similar performance bracket for Fivem, with frame rates within a few percent of the RTX 4060.
The Verdict
The data shows that this PC can run Fivem, but the playable settings depend heavily on resolution. The playable threshold is 60 FPS. At 1920x1080, all four tested presets (Low, Medium, High, Ultra) clear this threshold. The Ultra preset averages 92 FPS, High averages 119 FPS, Medium averages 149 FPS, and Low averages 189 FPS. This makes 1080p a fully playable environment with headroom for high refresh rates.
At 2560x1440, the system also clears 60 FPS on all presets. The best settings are Ultra, which averages 61 FPS. High averages 78 FPS, Medium averages 98 FPS, and Low averages 124 FPS. The 1440p Ultra result is just barely above the threshold, so users seeking a safety margin might prefer High. At 3840x2160, only the Low preset is playable, with an average of 69 FPS. Medium drops to 54 FPS on average, High to 44 FPS, and Ultra to 34 FPS. Therefore, the verdict is that 4K gaming is limited to Low settings, while 1440p and 1080p allow for higher quality presets.
CPU and GPU Roles
The benchmark data reveals a clear resolution-dependent shift in which component limits performance. At 1920x1080, the frame rates are high enough across all presets that the CPU's strong single-thread performance (3494 PassMark score) is likely sufficient to feed the GPU. The scaling from Low to Ultra at 1080p shows a drop from 189 to 92 FPS, a 51% reduction, which indicates the GPU is increasingly stressed as settings rise, but the CPU maintains a solid baseline.
At 2560x1440, the scaling is similar but the absolute numbers are lower. Low averages 124 FPS, while Ultra averages 61 FPS, a 51% drop again. This suggests the GPU is the primary factor in the preset scaling, as the CPU's workload does not change with resolution. The CPU's role is to maintain a minimum frame rate, and the data shows it does so effectively, as even the most demanding 1440p preset holds above 60 FPS.
At 3840x2160, the CPU's importance diminishes further. The GPU becomes the clear bottleneck, with Ultra dropping to 34 FPS and only Low reaching 69 FPS. The transition from 1440p to 4K at the same preset shows a significant performance hit, which is characteristic of GPU-bound rendering. In summary, the CPU provides a strong foundation, but the RTX 4060's 8 GB memory and 128-bit bus become limiting factors at higher resolutions and presets.
Best Settings per Resolution
For each resolution, the best settings are defined as the most demanding preset that still maintains an average of at least 60 FPS. At 1920x1080, the Ultra preset qualifies with an average of 92 FPS. This is the recommended configuration for full visual quality at this resolution.
At 2560x1440, the Ultra preset also qualifies, but with a much narrower margin. The average is exactly 61 FPS, which is only 1 FPS above the playable threshold. While this meets the criteria, High settings at 78 FPS provide a more comfortable buffer. For the purpose of this analysis, Ultra is the best settings based on the rule, with 61 FPS average.
At 3840x2160, the only preset that clears 60 FPS is Low, with an average of 69 FPS. Medium, High, and Ultra all fall below the threshold. Therefore, Low is the best settings for 4K, providing a playable experience but with reduced visual fidelity.
Measured FPS Breakdown
1920x1080:
- Low: Average 189 FPS.
- Medium: Average 149 FPS, with a minimum of 127 and a maximum of 171 FPS. This shows a wide variance, indicating some scenes are significantly more demanding.
- High: Average 119 FPS.
- Ultra: Average 92 FPS.
2560x1440:
- Low: Average 124 FPS.
- Medium: Average 98 FPS, with a minimum of 83 and a maximum of 113 FPS. The variance here is narrower than at 1080p, but still noticeable.
- High: Average 78 FPS.
- Ultra: Average 61 FPS.
3840x2160:
- Low: Average 69 FPS.
- Medium: Average 54 FPS, with a minimum of 46 and a maximum of 63 FPS. The minimum is well below the playable threshold, suggesting stutters in busy scenes.
- High: Average 44 FPS.
- Ultra: Average 34 FPS.
The data shows that the Medium preset is the only one with complete min/max data across all resolutions. At 1080p, the minimum of 127 FPS is still very playable. At 1440p, the minimum of 83 FPS remains above 60. At 4K, the minimum of 46 FPS falls below the threshold, confirming that Medium is not a reliable choice for 4K. The lack of min/max data for other presets indicates that only Medium was measured for variance, but the averages provide a clear picture of the performance hierarchy.