Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

75%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
145 FPS
Ultra 1080p Measured
71 FPS

1440p (2K / QHD)

Low 1440p Measured
96 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
26 FPS
10.9ms Frame Time
16ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 44,573
Graphics Card
Required 27,716
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 33 42 53
1440p QHD 47 60 75 96
1080p Full HD 71 92 115 145

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 92
1920x1080 Low 145
1920x1080 Medium 115
1920x1080 Ultra 71
2560x1440 High 60
2560x1440 Low 96
2560x1440 Medium 75
2560x1440 Ultra 47
3840x2160 High 33
3840x2160 Low 53
3840x2160 Medium 42
3840x2160 Ultra 26

Performance Analysis: Fivem on Your System

Measured FPS Breakdown

The recorded data for this combination of AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 2060 in Fivem shows a clear progression of performance across the three tested resolutions. At 1920x1080, the system delivers its strongest results. The Low preset reaches an average of 145 FPS, which is the highest recorded figure for this combo. Medium follows at 115 FPS, with a minimum of 97 FPS and a maximum of 132 FPS. High settings produce 92 FPS on average. The most demanding preset at this resolution, Ultra, still holds an average of 71 FPS. These figures indicate that the combination has substantial headroom at 1080p, even with the heaviest visual load.

Moving to 2560x1440, the averages drop but remain playable across most presets. Low settings show 96 FPS, which is still well above the 60 FPS threshold. Medium delivers 75 FPS, with a recorded minimum of 64 FPS and a maximum of 87 FPS. High settings land exactly at 60 FPS on average. Ultra falls to 47 FPS, which is below the playable line. The data shows a consistent step down from 1080p to 1440p, roughly a 30% reduction in average FPS at Low settings (145 to 96), and a similar proportional decrease at Medium (115 to 75).

At 3840x2160, the picture changes considerably. The RTX 2060, with its 6 GB VRAM and 192-bit memory bus, struggles to keep up with the pixel count. Low settings produce an average of 53 FPS, just short of the 60 FPS target. Medium drops to 42 FPS, with a minimum of 36 and a maximum of 48. High settings manage only 33 FPS, while Ultra falls to 26 FPS. None of the 4K presets reach the playable threshold. The gap between Low and Ultra at 4K is substantial: 53 versus 26 FPS, a difference of 27 FPS or roughly 51% of the Low figure.

The min and max FPS data, where available, shows the frame pacing behavior. At 1920x1080 Medium, the spread from 97 to 132 FPS indicates a range of 35 FPS, which is modest compared to the average. At 2560x1440 Medium, the spread is 23 FPS (64 to 87). At 3840x2160 Medium, the spread narrows to 12 FPS (36 to 48), which suggests that the GPU is consistently near its limit at that resolution. The absence of min and max values for several presets means the database only records averages for those configurations, but the available ranges hint at stable performance when the GPU is not fully saturated.

Best Settings per Resolution

For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, with an average of 71 FPS. This is the highest quality setting tested, and it clears the playable threshold with a margin of 11 FPS. The data indicates that this combination can run Fivem at full visual quality on a 1080p display without dipping below the 60 FPS line.

At 2560x1440, the best settings are High, which produces an average of exactly 60 FPS. This is the maximum quality preset that remains playable at this resolution. Medium also qualifies at 75 FPS, but High offers a higher visual fidelity while still meeting the threshold. Ultra falls short at 47 FPS, so it is not recommended for 1440p.

For 3840x2160, no preset reaches 60 FPS. The closest is Low at 53 FPS, but this is still 7 FPS below the playable mark. The verdict data confirms that there are no playable settings at 4K for this combination. Users targeting 4K would need to consider a different GPU, as the RTX 2060 cannot maintain the required frame rate even with the lowest quality settings.

FAQ

Q: Can this system run Fivem at 60 FPS on a 1080p monitor?

A: Yes. The recorded data shows that all four presets at 1920x1080, Low (145 FPS), Medium (115 FPS), High (92 FPS), and Ultra (71 FPS), exceed the 60 FPS threshold. The Ultra preset is the most demanding option that still maintains playable performance.

Q: What is the highest quality setting available at 2560x1440 while staying at or above 60 FPS?

A: High settings, with an average of 60 FPS exactly. Medium is also playable at 75 FPS, but High provides better visual quality while meeting the 60 FPS requirement. Ultra at 47 FPS does not qualify.

Q: Is 4K gaming possible with the RTX 2060 in Fivem?

A: No. At 3840x2160, the best average FPS is 53 on Low settings, which is below the 60 FPS playable threshold. Medium (42 FPS), High (33 FPS), and Ultra (26 FPS) all fall further behind. The database lists no playable settings for this resolution.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The AMD Ryzen 5 7500X3D has an average benchmark score of 44573. Its closest rival, the Intel Core Ultra X9 388H, scores 44466, which is 0.2% lower. The Intel Core i9-13950HX is 0.5% behind at 44342, and the AMD Ryzen AI Max 385 is 0.6% behind at 44309. The Intel Core i5-14600 is 0.7% ahead at 44889.

Q: What does the GPU benchmark data indicate about the RTX 2060's standing?

A: The GPU has a Passmark G3D score of 14111 and an average benchmark score of 15290. Its nearest rival, the NVIDIA GeForce GTX 580, scores 15283, a delta of 0%. The AMD Radeon 680M is 0.1% ahead at 15270, and the RTX 3050 OEM is 0.6% ahead at 15199. The AMD Radeon RX 7600 leads by 0.8% at 15171.

How This Combo Ranks

In the database of tested combinations for Fivem, this pairing of AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 2060 ranks 2911 out of 3707 combos. This places the system in the lower third of all recorded configurations, which is consistent with the GPU being the limiting factor. The CPU is a high-end part, as shown by its 89th percentile ranking among all CPUs and its strong Passmark multithread score of 25047. However, the RTX 2060 sits at the 58th percentile among all GPUs, which drags the overall combo position down.

The rank of 2911 means that roughly 78% of tested combinations outperform this one in Fivem. This is not surprising given the GPU's age and memory capacity. The 6 GB VRAM is a constraint for higher resolutions, and the 4K data confirms this limitation. The combination's position in the rankings reflects the balance between a very capable CPU and a mid-range GPU from a previous generation.

Similar Performance Alternatives

Looking at the CPU's nearest rivals, the AMD Ryzen 5 7500X3D performs nearly identically to several other processors. The Intel Core Ultra X9 388H scores 44466, which is 0.2% lower than the 7500X3D's 44573. The Intel Core i9-13950HX is 0.5% behind, and the AMD Ryzen AI Max 385 is 0.6% behind. The Intel Core i5-14600 is 0.7% ahead. Any of these CPUs would produce essentially the same frame rates in Fivem, as the game is unlikely to be CPU-bound with such a strong processor.

On the GPU side, the RTX 2060's nearest rivals are closely matched. The NVIDIA GeForce GTX 580 has an identical average score (15283 versus 15290, a 0% delta). The AMD Radeon 680M is 0.1% higher, the RTX 3050 OEM is 0.6% higher, and the AMD Radeon RX 7600 is 0.8% higher. All of these GPUs would deliver similar performance in Fivem. The RTX 3050 OEM and RX 7600 offer marginal improvements, but the differences are within a single percentage point. Users with any of these GPUs would see nearly the same FPS numbers across all resolutions and presets.

The practical implication is that this combo's performance profile is representative of a broad range of hardware. Swapping the CPU for any of its rivals would change results by less than 1%. Swapping the GPU for any of its rivals would likewise keep the system within the same performance envelope. The weakest link, the GPU, defines the ceiling in Fivem, and the recorded data shows that ceiling is around 145 FPS at 1080p Low and 53 FPS at 4K Low.

The Verdict

This PC can run Fivem, but the playable range depends heavily on the display resolution. At 1920x1080, the system clears the 60 FPS threshold with every preset, including Ultra at 71 FPS. This is the only resolution where the full quality range is available. At 2560x1440, the system remains playable on Low (96 FPS), Medium (75 FPS), and High (60 FPS), but Ultra drops to 47 FPS. The best setting at this resolution is High, which exactly meets the 60 FPS requirement.

At 3840x2160, the system cannot reach 60 FPS on any preset. The closest is Low at 53 FPS, which is below the playable mark. The verdict data lists no playable settings for 4K, so users with a 4K display would need to lower the resolution or upgrade the GPU. The overall conclusion is that this combination is a solid 1080p performer, an adequate 1440p performer with quality compromises, and not viable for 4K gaming in Fivem.

CPU and GPU Roles

The benchmark data shows a clear division of labor between the two components. The AMD Ryzen 5 7500X3D is a high-end desktop processor with 6 cores, 12 threads, and a 96 MB L3 cache. Its Passmark single-thread score of 3494 and multithread score of 25047 place it in the 89th percentile of all CPUs. For Fivem, which is a multiplayer game with significant CPU demands for world simulation and player interactions, this processor is more than sufficient.

The GPU, however, is the limiting factor. The RTX 2060 has 1920 shading units, 120 TMUs, and 48 ROPs, with a 192-bit memory bus and 6 GB of GDDR6. Its Passmark G3D score of 14111 is modest by modern standards, and the 58th percentile ranking reflects its mid-range status. As resolution increases, the GPU workload grows faster than the CPU workload. The data shows this scaling: at 1080p, the difference between Low and Ultra is 145 to 71 FPS (a 51% drop). At 1440p, the same comparison is 96 to 47 FPS (a 51% drop). At 4K, it is 53 to 26 FPS (a 51% drop). The consistent proportional decline across resolutions indicates that the GPU is the bottleneck in all cases.

The CPU's role becomes more apparent when comparing resolutions at the same preset. From 1080p to 1440p at High settings, the FPS drops from 92 to 60, a reduction of 35%. From 1440p to 4K at High, it drops from 60 to 33, a reduction of 45%. This larger drop at higher resolutions confirms that the GPU is increasingly stressed. The CPU, by contrast, has ample headroom. Its nearest rivals are within 0.7% in synthetic scores, and none of them would change the FPS outcomes in Fivem.

For users considering upgrades, the data points squarely at the GPU. The CPU is unlikely to be a constraint in this game, even at lower resolutions where CPU load is relatively higher. The RTX 2060, with its 6 GB frame buffer and Turing architecture, simply cannot sustain 60 FPS at 4K. At 1440p, it is borderline at High settings. At 1080p, it is fully capable. The verdict is straightforward: keep the CPU, consider a GPU upgrade if 1440p High or 4K is the target, and enjoy smooth 1080p performance as configured.