Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
278 FPS
Ultra 1080p Measured
137 FPS

1440p (2K / QHD)

Low 1440p Measured
183 FPS
Ultra 1440p Measured
90 FPS

4K (Ultra HD)

Low 4K Measured
102 FPS
Ultra 4K Measured
48 FPS
5.6ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 24,964
Graphics Card
Required 27,716
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 48 62 83 102
1440p QHD 90 119 147 183
1080p Full HD 137 178 223 278

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 178
1920x1080 Low 278
1920x1080 Medium 223
1920x1080 Ultra 137
2560x1440 High 119
2560x1440 Low 183
2560x1440 Medium 147
2560x1440 Ultra 90
3840x2160 High 62
3840x2160 Low 102
3840x2160 Medium 83
3840x2160 Ultra 48

Performance Analysis: Fivem on Your System

Fivem, the multiplayer title released in 2017, is a demanding workload for any CPU-GPU pairing, and the combination of AMD's Ryzen 5 7500F and NVIDIA's GeForce RTX 5070 lands in a solid position in the benchmark database. This pairing sits at rank 729 out of 3707 tested combos for this game — inside the top fifth of all measured configurations. The RTX 5070 brings Blackwell 2.0 architecture, 12 GB of GDDR7 memory, and 6144 shading units, while the Ryzen 5 7500F contributes six Zen 4 cores, twelve threads, and a 5.00 GHz boost clock. The data shows measured frame rates well above the 60 FPS playability threshold at every resolution, with only one preset exception at 4K.

How This Combo Ranks

Out of 3707 tested hardware combinations in Fivem, this pairing ranks 729th. That places it firmly in the upper tier of the database — roughly the top fifth of all configurations benchmarked for this game. It is not an extreme flagship build: the Ryzen 5 7500F is a 65 W desktop processor with no integrated graphics, sitting in the 77th percentile versus all CPUs in the database, while the RTX 5070 occupies the 82nd percentile versus all GPUs. Individually respectable, together they deliver frame rates that most tested combos do not.

Context matters here. Fivem is a multiplayer game where CPU thread performance often governs server-heavy scenes, and the 7500F's single-thread results — a Geekbench single-core score of 2374 and a Cinebench R23 single-core score of 3218 — indicate a processor that holds its own in exactly the metric this genre rewards. The GPU, meanwhile, posts a PassMark G3D score of 29137 and a 3DMark Steel Nomad DX12 score of 5077. Neither component is the fastest in the database, but the pairing lacks an obvious bottleneck, which is why it outperforms the majority of the 3707 combos ranked for this title.

Best Settings per Resolution

The playability threshold used by the database is 60 FPS average, and the measured data identifies the most demanding preset that stays at or above that line at each resolution.

At 1920x1080, the answer is Ultra, with a measured average of 137.3 FPS. Every preset clears the threshold comfortably — even Ultra more than doubles it.

At 2560x1440, Ultra again qualifies, delivering 89.6 FPS average. All four presets are playable at this resolution, and there is no need to drop settings to maintain smoothness.

At 3840x2160, the situation tightens. Ultra averages 47.6 FPS, which falls below the 60 FPS threshold. High is the correct choice here, averaging 62.1 FPS — a narrow but sufficient margin. Medium (82.5 FPS) and Low (101.8 FPS) provide headroom if the frame rate needs to be more stable in busy multiplayer scenes.

In short: Ultra at 1080p and 1440p, High at 4K.

CPU and GPU Roles

Which component matters more for Fivem on this combo depends on resolution, and the scaling data makes the division of labor clear.

From 1080p Ultra (137.3 FPS) to 1440p Ultra (89.6 FPS), average frame rate drops by roughly 35% as pixel count increases — a substantial fall that points to the GPU working harder as resolution rises. From 1440p Ultra to 4K Ultra (47.6 FPS), the drop is roughly 47%, confirming the RTX 5070 is the limiting factor at the highest resolution. A CPU-bound configuration would flatten out across resolutions; this one does not.

At 1080p, the picture shifts. The 278.4 FPS average on Low settings is far above what most displays can refresh, and the gap between Low (278.4 FPS) and Ultra (137.3 FPS) at 1080p is larger, in absolute and relative terms, than at any other resolution. That sensitivity to settings at low resolution indicates the ceiling is shared: the GPU responds to reduced load, but the 7500F's single-thread throughput — a PassMark single-thread score of 3841 — sets the ultimate limit when the GPU is not saturated.

The preset scaling at 4K tells the same story from the other side: High to Low moves the average from 62.1 to 101.8 FPS, a 64% gain from settings reduction alone. At that resolution, the RTX 5070's 672 GB/s of memory bandwidth and 482.3 GTexel/s texture rate are doing the heavy lifting, and the CPU matters comparatively less.

For a multiplayer title, the practical takeaway is that the 7500F's 5.00 GHz boost and strong per-core results keep it out of the way at 1440p and 4K, while the RTX 5070 determines how high settings can go.

Similar Performance Alternatives

The nearestRivals data for each component identifies hardware that would behave similarly in this game.

On the CPU side, the Ryzen 5 7500F's average benchmark score of 24964 is nearly identical to several rivals: the Intel Core i7-11850H averages 24935 (a delta of just 0.1%), the AMD Ryzen 5 8400F averages 25005 (delta -0.2%), the Intel Core i7-13620H averages 24911 (delta 0.2%), and the Intel Core 5 210H averages 24872 (delta 0.4%). All four would deliver frame rates within a fraction of a percent of the 7500F in CPU-limited scenarios, according to the database's aggregate scoring.

On the GPU side, the RTX 5070's average benchmark score of 40377 is matched closely by the AMD Radeon Pro 580 at 40318 (delta 0.1%), the AMD Radeon Pro WX 7100 at 40063 (delta 0.8%), the AMD Radeon Pro 5300 at 40870 (delta -1.2%), and the NVIDIA RTX A500 Mobile at 39568 (delta 2%). A pairing built around any of these GPUs would be expected to produce broadly similar frame rates in Fivem, with the RTX A500 Mobile trailing by the widest margin — about 2% in aggregate score.

Combining these, a configuration like the Ryzen 5 8400F with the Radeon Pro 580 would, on aggregate scoring alone, land within roughly a percent of this combo's measured performance profile. Individual game results will vary, but the deltas are small enough that the alternatives list reads as a performance tier rather than a set of distinct options.

Measured FPS Breakdown

All figures below are measured average frame rates from the database; minimum and maximum values were not recorded for these runs.

3840x2160 (4K):

  • Low: 101.8 FPS
  • Medium: 82.5 FPS
  • High: 62.1 FPS
  • Ultra: 47.6 FPS

2560x1440:

  • Low: 183.2 FPS
  • Medium: 147.4 FPS
  • High: 119 FPS
  • Ultra: 89.6 FPS

1920x1080:

  • Low: 278.4 FPS
  • Medium: 222.8 FPS
  • High: 177.5 FPS
  • Ultra: 137.3 FPS

The pattern is consistent: each step up in preset costs roughly 20-30% of the average frame rate at any given resolution, and each step up in resolution costs roughly 30-47%. The single result below the 60 FPS threshold is 4K Ultra at 47.6 FPS; every other combination of resolution and preset measured here is playable, and most are playable with wide margins. The verdict data confirms this: playable settings are High, Medium, and Low at 4K, and all four presets at both 1440p and 1080p.

For reference, the RTX 5070 in this pairing carries 48 ray tracing cores and 192 tensor cores on the GB205 chip, with a boost clock of 2512 MHz — though Fivem's measured presets here are conventional quality levels, and the frame rate data reflects them as such.

FAQ

Q: Can the Ryzen 5 7500F + RTX 5070 run Fivem at 4K?

A: Yes, with one caveat. At 3840x2160, High settings average 62.1 FPS, clearing the 60 FPS threshold. Ultra averages 47.6 FPS and falls below it, so High is the recommended 4K preset.

Q: What is the best settings choice at 1440p?

A: Ultra. It averages 89.6 FPS at 2560x1440, comfortably above the playable threshold, so there is no reason to drop to High (119 FPS) or Medium (147.4 FPS) for smoothness.

Q: How does this combo rank against other tested configurations?

A: It ranks 729 out of 3707 combos tested in Fivem, placing it in the top fifth of the database for this game.

Q: Is the CPU or the GPU the bottleneck?

A: It depends on resolution. The large frame rate drops between resolutions — 137.3 to 89.6 to 47.6 FPS on Ultra — indicate the RTX 5070 limits performance at 1440p and 4K. At 1080p, the 7500F's single-thread performance becomes the shared ceiling, with a PassMark single-thread score of 3841.

Q: How much frame rate is gained by dropping from Ultra to High at 4K?

A: The average rises from 47.6 FPS to 62.1 FPS — a gain of roughly 30%, and enough to move from below the 60 FPS threshold to above it.

Q: Would similar hardware perform the same in this game?

A: Based on aggregate database scores, likely yes. The Ryzen 5 8400F scores within 0.2% of the 7500F, and the Radeon Pro 580 scores within 0.1% of the RTX 5070's average, so equivalent-tier substitutes should behave similarly, within about a percent on aggregate.