Fivem

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 combination delivers a highly capable Fivem experience, with the data showing that playable performance is attainable at every tested resolution. At 1080p and 1440p, the system clears the 60 FPS threshold even at the most demanding Ultra preset, while 4K requires a reduction to Medium settings to maintain smooth gameplay. The measured FPS data, combined with the CPU and GPU benchmark scores, paints a clear picture of a balanced pairing where the GPU becomes the primary constraint at higher resolutions.

FAQ

Q: What is the best preset for 4K gaming with this system?

A: The best 4K preset that maintains at least 60 FPS is Medium, which delivers an average of 62 FPS with a minimum of 52 FPS and a maximum of 71 FPS.

Q: Can this PC run Fivem at 1440p on Ultra settings?

A: Yes, the data shows the system achieves an average of 69 FPS at 2560x1440 with Ultra settings, comfortably clearing the 60 FPS playable threshold.

Q: How does the CPU perform relative to its nearest rivals?

A: The Ryzen 5 7500F has an average benchmark score of 24964, which is 0.1% ahead of the Intel Core i7-11850H (24935) and 0.2% ahead of the Intel Core i7-13620H (24911), while sitting 0.2% behind the AMD Ryzen 5 8400F (25005).

Q: What is the FPS difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the system produces 214 FPS on Low settings and 105 FPS on Ultra settings, representing a 109 FPS drop when moving to the highest quality preset.

Q: Is the RTX 3070 significantly faster than its closest competitor?

A: The RTX 3070 has an average benchmark score of 17208, which is 0.7% higher than the AMD Radeon RX 7600 XT (17083) and 1.5% higher than the NVIDIA Tesla K40c (17468 is higher, meaning the 3070 is actually 1.5% behind that rival).

Q: Which resolutions are fully playable at all settings?

A: Both 1920x1080 and 2560x1440 are fully playable at every preset tested, with the lowest result being 69 FPS at 1440p Ultra and the lowest at 1080p being 105 FPS on Ultra.

CPU and GPU Roles

The benchmark data reveals a distinct shift in component responsibility as resolution increases. At 1920x1080, the system's performance scales dramatically with settings changes, moving from 214 FPS on Low to 105 FPS on Ultra. This wide spread indicates that the GPU is the primary limiting factor even at lower resolutions, as the Ryzen 5 7500F's strong single-thread performance — evidenced by its 3dmark_single_thread score of 974 and Cinebench R23 single-core score of 3218 — provides ample headroom for the graphics card to work.

Moving to 2560x1440, the same pattern holds but with a compressed range. The system produces 141 FPS on Low settings and 69 FPS on Ultra, a 72 FPS difference compared to the 109 FPS spread at 1080p. This compression suggests that the GPU is becoming more saturated as pixel count increases, though the CPU continues to keep pace without bottlenecking. The 1440p Medium preset shows a minimum of 94 FPS, indicating consistent frame delivery even during demanding scenes.

At 3840x2160, the GPU's dominance becomes unequivocal. The RTX 3070's 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are pushed to their limits, with the system dropping to 49 FPS on High and 38 FPS on Ultra. The fact that Low settings at 4K still produce 78 FPS — higher than High at the same resolution — demonstrates that graphical settings have a more pronounced impact on performance than resolution scaling alone. The CPU's role at 4K is largely relegated to feeding the GPU, and the Ryzen 5 7500F's 6 cores and 12 threads with a 5.00 GHz boost clock are more than sufficient for this task.

The percentile rankings reinforce this division of labor. The CPU sits at the 77th percentile among all processors, while the GPU ranks at the 61st percentile among all graphics cards. This gap suggests the processor has more relative headroom than the graphics card, making the RTX 3070 the component most likely to determine overall gaming performance in Fivem, particularly at higher resolutions and quality presets.

Measured FPS Breakdown

At 1920x1080, the system delivers exceptional performance across all settings. The Low preset produces an average of 214 FPS, while Medium achieves 169 FPS with a minimum of 144 FPS and a maximum of 194 FPS. High settings yield 135 FPS on average, and Ultra maintains 105 FPS. Every preset at this resolution provides a significant margin above the 60 FPS playable threshold, with even the most demanding setting delivering 75% more frames than required.

The 2560x1440 results show a step down in raw frame rates but still maintain excellent playability. Low settings produce 141 FPS, Medium delivers 111 FPS with a minimum of 94 FPS and maximum of 128 FPS, High achieves 89 FPS, and Ultra stays at 69 FPS. The Medium preset at 1440p is particularly noteworthy for its consistency, with the minimum frame rate staying well above the 60 FPS mark.

At 3840x2160, performance becomes more variable and demanding. Low settings yield 78 FPS, which is the only 4K preset with a substantial margin above 60 FPS. Medium delivers 62 FPS on average with a minimum of 52 FPS and maximum of 71 FPS, placing it marginally above the playable threshold on average but with occasional dips below. High settings drop to 49 FPS, and Ultra falls to 38 FPS, both of which are below the 60 FPS target.

The scaling between resolutions shows a predictable pattern. Moving from 1080p to 1440p on Ultra settings reduces performance from 105 FPS to 69 FPS, a 34% decrease. The jump from 1440p to 4K on the same settings is even more severe, dropping from 69 FPS to 38 FPS, a 45% reduction. This steep decline at 4K highlights the RTX 3070's limitations at ultra-high resolutions with demanding presets.

Similar Performance Alternatives

The Ryzen 5 7500F's nearest rivals in benchmark performance are all within a narrow band of 0.4% delta. The Intel Core i7-11850H scores 24935, just 0.1% behind the 7500F's 24964. The AMD Ryzen 5 8400F scores 25005, a 0.2% advantage over the 7500F. The Intel Core i7-13620H achieves 24911, 0.2% behind, and the Intel Core 5 210H scores 24872, 0.4% behind. In practical terms, any of these processors would deliver nearly identical Fivem performance, as the differences are well within measurement noise.

For the GPU, the RTX 3070's rivals show slightly larger but still modest gaps. The AMD Radeon RX 7600 XT scores 17083, which is 0.7% lower than the 3070's 17208. The NVIDIA GeForce GTX 690 scores 17037, 1.0% behind, and the AMD Radeon HD 7970M scores 17019, 1.1% behind. Interestingly, the NVIDIA Tesla K40c scores 17468, which is 1.5% higher than the RTX 3070, though this is a compute-oriented card unlikely to be used for gaming. For Fivem specifically, the RX 7600 XT would be the most relevant alternative, offering nearly identical performance characteristics.

When considering the full system, a configuration with any of these rival CPUs paired with the RTX 3070 would produce essentially the same FPS numbers at every resolution and preset. Similarly, keeping the Ryzen 5 7500F and swapping the GPU to an RX 7600 XT would result in a negligible performance difference, likely within 1-2 FPS at most settings.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the clear choice, delivering 105 FPS on average. This provides a 75% margin above the 60 FPS threshold while offering the highest visual quality. The system has so much headroom at this resolution that even the most demanding settings leave substantial performance in reserve.

For 2560x1440, Ultra remains the best option with an average of 69 FPS. While this is closer to the 60 FPS threshold than at 1080p, it still provides a 15% buffer. The data shows that High settings at 1440p deliver 89 FPS, so players prioritizing frame rate stability might choose High, but Ultra remains comfortably playable.

At 3840x2160, the best playable preset is Medium, which achieves 62 FPS on average. This is the only 4K preset that stays at or above 60 FPS, though the minimum frame rate of 52 FPS indicates some dips below the target. Players seeking a more consistent 4K experience should consider Low settings, which deliver 78 FPS and provide a healthier margin above the threshold.

The Verdict

This PC can absolutely run Fivem, and the data confirms it clears the 60 FPS playable threshold at multiple settings across all three tested resolutions. At 1920x1080, the system is fully playable at every preset, with the worst-case Ultra setting producing 105 FPS. The 2560x1440 resolution is similarly excellent, with all four presets — Low, Medium, High, and Ultra — maintaining 69 FPS or higher.

The 3840x2160 verdict is more nuanced. The system achieves playable performance on Low settings (78 FPS) and Medium settings (62 FPS), with Medium being the best playable preset. However, High (49 FPS) and Ultra (38 FPS) fall below the 60 FPS target and are not recommended for smooth gameplay. The verdict data confirms this assessment, listing Low and Medium as the playable settings at 4K, with Medium as the best setting delivering 62 FPS.

Overall, this combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3070 is well-suited for Fivem. The CPU's 77th percentile benchmark ranking and the GPU's 61st percentile ranking combine to create a system that excels at 1080p and 1440p with maximum settings, while remaining capable at 4K with adjusted quality settings. The system ranks 1575th out of 3707 tested combinations for this game, placing it in the upper half of configurations.