Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

57%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
190 FPS
Ultra 1080p Measured
90 FPS

1440p (2K / QHD)

Low 1440p Measured
124 FPS
Ultra 1440p Measured
60 FPS

4K (Ultra HD)

Low 4K Measured
69 FPS
Ultra 4K Measured
34 FPS
8.3ms Frame Time
12ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 20,733
Graphics Card
Required 27,716
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 41 57 69
1440p QHD 60 77 99 124
1080p Full HD 90 120 147 190

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 120
1920x1080 Low 190
1920x1080 Medium 147
1920x1080 Ultra 90
2560x1440 High 77
2560x1440 Low 124
2560x1440 Medium 99
2560x1440 Ultra 60
3840x2160 High 41
3840x2160 Low 69
3840x2160 Medium 57
3840x2160 Ultra 34

Performance Analysis: Fivem on Your System

The AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 4060 pairing delivers a solid Fivem experience, but the playable ceiling varies sharply by resolution. The data shows this combo is a clear 1080p and 1440p performer, while 4K requires a significant settings compromise to stay fluid. Below is a resolution-by-resolution breakdown of the most demanding preset that maintains at least 60 FPS, followed by an analysis of which component carries the load.

Best Settings per Resolution

1920x1080: The most demanding preset that stays at or above 60 FPS is Ultra, with an average of 89.7 FPS. This is the full visual experience with no compromises; the frame rate is well above the playable threshold, leaving headroom for multiplayer chaos. If you prefer maximum smoothness, Low settings reach 189.5 FPS, but Ultra is the sweet spot for image quality without sacrificing playability.

2560x1440: The best preset that clears 60 FPS is Ultra, averaging 60.1 FPS. This is a narrow margin — just 0.1 FPS above the threshold — so it is technically playable but leaves little buffer for drops in busy scenes. For a more comfortable margin, High settings deliver 77.4 FPS, which is a safer choice for consistent 60+ gameplay. Medium runs at 98.7 FPS and Low at 123.6 FPS if you prefer higher refresh rates over fidelity.

3840x2160: The only preset that stays above 60 FPS is Low, with an average of 68.9 FPS. Medium falls to 56.9 FPS, High drops to 41.4 FPS, and Ultra bottoms out at 33.7 FPS. This is a clear case where the GPU's 8 GB memory and 128-bit bus become limiting factors at 4K; you must accept Low settings for a playable experience.

CPU and GPU Roles

The data reveals a distinct shift in bottleneck behavior across resolutions. At 1920x1080, the CPU is the primary driver of performance. The jump from Low to Ultra costs 99.8 FPS (from 189.5 down to 89.7), indicating that the Ryzen 5 5600GT's six cores and 12 threads are fully utilized at lower resolutions, while the RTX 4060 has ample headroom. The 5600GT's single-thread score of 913 in 3DMark and multi-thread score of 5554 suggest it can feed the GPU efficiently, but the frame rate scaling shows the CPU is the limiting factor at 1080p.

At 2560x1440, the balance shifts toward the GPU. The performance delta between Low and Ultra is 63.5 FPS (123.6 to 60.1), which is smaller than at 1080p. This indicates the GPU is starting to take on more responsibility, but the CPU still keeps pace. The RTX 4060's 15.11 TFLOPS FP32 performance and 272.0 GB/s memory bandwidth are sufficient for this resolution, as evidenced by the Ultra preset barely clearing 60 FPS.

At 3840x2160, the GPU becomes the dominant bottleneck. The frame rate collapses from Low at 68.9 FPS to Medium at 56.9 FPS — a drop of 12 FPS for one settings tier. This steep decline points to the RTX 4060's 8 GB VRAM and 128-bit memory interface being overwhelmed by 4K textures and geometry. The CPU's role diminishes; even with the 5600GT's strong multi-threaded score of 17272 in Cinebench R23, it cannot compensate for the GPU's lack of memory bandwidth at 4K.

The scaling between resolutions confirms this. At Ultra settings, 1080p delivers 89.7 FPS, 1440p drops to 60.1 FPS (a 33% reduction), and 4K falls to 33.7 FPS (a 62% reduction from 1080p). This non-linear drop is characteristic of a GPU-bound scenario at higher resolutions. Conversely, at Low settings, 1080p hits 189.5 FPS, 1440p reaches 123.6 FPS, and 4K manages 68.9 FPS — a more linear scaling that suggests CPU limitations are less severe when the GPU workload is lighter.

FAQ

Q: Can this combo run Fivem at 60 FPS on a 4K monitor?

A: Yes, but only at Low settings, which average 68.9 FPS. Medium falls below the threshold at 56.9 FPS, so Low is the only playable preset at 3840x2160.

Q: What is the best resolution for this pairing?

A: 1920x1080 is the strongest choice. Ultra settings average 89.7 FPS, and even the most demanding preset stays well above the 60 FPS playable threshold. 2560x1440 is also viable, but Ultra barely clears at 60.1 FPS.

Q: How does the RTX 4060 compare to its nearest rival, the AMD Radeon 780M?

A: The RTX 4060 has an average benchmark score of 17639, while the Radeon 780M scores 17588, a delta of 0.3%. This means the two GPUs perform nearly identically in synthetic benchmarks, though the RTX 4060's dedicated memory and drivers may offer different real-world behavior in Fivem.

Q: Is the Ryzen 5 5600GT a bottleneck at 1080p?

A: The data suggests the CPU is the primary limiter at 1080p. The frame rate drops from 189.5 FPS at Low to 89.7 FPS at Ultra, which is a 53% reduction. This scaling indicates the CPU's six cores are working hard, but the 5600GT's single-thread score of 913 in 3DMark is sufficient to keep the GPU fed at lower settings.

Q: What settings should I use for a competitive edge with high refresh rates?

A: At 1920x1080, Low settings deliver 189.5 FPS, which is ideal for high-refresh monitors. Medium reaches 146.6 FPS, and High hits 119.7 FPS. At 2560x1440, Low provides 123.6 FPS for a similar advantage.

Q: How does this combo rank against all tested combinations?

A: It ranks 2040 out of 3707 combos for Fivem. This places it in the middle of the pack, meaning there is significant headroom above it but also many weaker setups.

The Verdict

This PC can run Fivem, but the experience depends heavily on your target resolution and quality expectations. At 1920x1080, the verdict is a definitive yes: Ultra settings average 89.7 FPS, which is comfortably above the 60 FPS threshold. You can enjoy the game with all visual features enabled and still have performance to spare for multiplayer sessions. At 2560x1440, it is playable at Ultra with 60.1 FPS, but the margin is razor-thin. The data indicates you should stick to High settings at 77.4 FPS for a stable experience, or accept the risk of dips below 60 in dense areas. At 3840x2160, the verdict is a conditional yes: only Low settings at 68.9 FPS maintain playability. Medium at 56.9 FPS and above fail the 60 FPS requirement, so 4K users must make a significant visual compromise.

The overall pattern is clear: this combo is built for 1080p and 1440p gaming, with 4K as a secondary consideration. The RTX 4060's 8 GB VRAM and 128-bit bus are adequate for lower resolutions, but they limit 4K headroom. The Ryzen 5 5600GT, with its 6 cores and 12 threads, provides enough single-thread performance to avoid being the bottleneck at higher resolutions, as evidenced by the steep FPS drops at 4K being tied to GPU settings rather than CPU load.

Similar Performance Alternatives

For the CPU, the Ryzen 5 5600GT's nearest rival is the Intel Core i5-12490F, which has a nearly identical average score of 20802 versus the 5600GT's 20733, a delta of -0.3%. This means swapping to the i5-12490F would yield virtually indistinguishable performance in Fivem. Other close matches include the Intel Xeon 6325P (score 20821, delta -0.4%) and the Intel Core Ultra 5 125U (score 20826, delta -0.4%), all within a fraction of a percent. The AMD EPYC 7J13 (score 20845, delta -0.5%) is also a statistical tie, though its server-oriented design makes it an unlikely gaming choice.

For the GPU, the RTX 4060's nearest rival is the AMD Radeon HD 7790, which scores 17666 versus the 4060's 17639, a delta of -0.2%. This is surprising given the generational gap, but the benchmark data places them nearly equal. The AMD Radeon 780M (score 17588, delta 0.3%) is an integrated graphics solution that matches the 4060's average score, though it would likely perform differently under sustained gaming load. The AMD Radeon Pro 560 (score 17551, delta 0.5%) and AMD Radeon Pro 460 (score 17509, delta 0.7%) are also close, but these are professional workstation cards not optimized for gaming.

In practical terms, these rivals mean that if you already own an i5-12490F or a Radeon 780M system, you should see similar Fivem performance to this combo. The differences are within noise margins, so upgrading from any of these parts would not yield a meaningful FPS improvement.

How This Combo Ranks

The Ryzen 5 5600GT + RTX 4060 combination ranks 2040 out of 3707 tested combos for Fivem. This places it in the 55th percentile of all tested systems, meaning roughly 45% of configurations are faster. This is a middle-of-the-road result, which aligns with the measured performance: it is a capable 1080p machine and a decent 1440p option, but it does not excel at 4K or at high-refresh ultra settings.

The ranking reflects the hardware's position in the market. The CPU sits in the 74th percentile of all CPUs, while the GPU is in the 61st percentile of all GPUs. The combo rank is lower than both individual percentiles, suggesting that the pairing has some inefficiency — likely due to the GPU's 8 GB memory limit or the CPU's PCIe Gen 3 interface (which limits bandwidth to the GPU's PCIe 4.0 x8 interface). In Fivem, which is a multiplayer game with heavy CPU load from other players, the 5600GT's 6 cores and 12 threads are adequate, but not exceptional.

For context, the top-ranked combos likely feature higher-end CPUs and GPUs with more VRAM and wider memory buses. The RTX 4060's 128-bit bus and 8 GB VRAM are the primary handicaps, as seen in the 4K performance drop. If you are building a new system, this rank suggests you are getting a solid mid-range experience, but there is clear headroom above you. If you already own this combo, the data confirms it is a good match for 1080p and acceptable for 1440p, with 4K requiring a settings sacrifice.