Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 46 | 58 | 74 |
| 1440p QHD | 65 | 84 | 105 | 133 |
| 1080p Full HD | 99 | 127 | 159 | 201 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
The AMD Ryzen 5 5600F paired with the NVIDIA GeForce RTX 5060 delivers a solid, but not elite, experience in Fivem. Benchmark data shows the combination ranks 1637th out of 3707 tested combos, placing it above the median for this multiplayer title. At 1080p and 1440p, every preset—Low, Medium, High, and Ultra—clears the 60 FPS playable threshold, while 4K only manages to stay playable on Low settings. The RTX 5060's launch MSRP is 299 USD.
Similar Performance Alternatives
The Ryzen 5 5600F's average benchmark score of 36945 places it in the 85th percentile of all CPUs. Its nearest rivals are all within a half percent of that score: the Intel Core Ultra 5 225 (36938, delta 0%), the AMD Ryzen 5 5500X3D (37018, -0.2%), the AMD Ryzen AI 7 PRO 450 (37093, -0.4%), and the Intel Core i9-12900T (37112, -0.5%). In practical terms, any of these processors would deliver nearly identical frame rates in CPU-bound scenarios. The negative deltaPct values indicate the rivals are marginally faster—between 0.2% and 0.5%—but the differences are negligible for gaming.
On the GPU side, the RTX 5060's average score of 26331 lands in the 72nd percentile of all graphics cards. Its closest alternatives are the AMD Radeon 860M (26401, -0.3%), the NVIDIA GeForce MX550 (26421, -0.3%), and the AMD Radeon RX 5700 XT 50th Anniversary (26553, -0.8%)—all slightly faster by less than a percent. Conversely, the AMD Radeon RX 6750 XT (26011, +1.2%) trails the RTX 5060 by 1.2%. For Fivem, swapping to any of these rivals would yield frame rates within a few FPS of what this combo produces at every resolution and preset. The data shows the RTX 5060 sits in a tight performance band where the differences among these cards are unlikely to change playability outcomes.
How This Combo Ranks
Among 3707 tested CPU-GPU combinations, this pairing ranks 1637th. That means 1636 combos deliver higher average performance, while 2070 combos perform worse—placing it above roughly 56% of all tested systems. This is a mid-pack result, not a top-tier configuration. The rank reflects the combined capabilities of the Ryzen 5 5600F and RTX 5060 in Fivem specifically, not synthetic benchmarks. Given that the CPU and GPU each sit in the 85th and 72nd percentiles respectively, the combo's overall rank is lower than either component's individual standing, suggesting Fivem's workload does not scale perfectly with raw hardware power. The measured FPS data reinforces this: even at 1080p Ultra, the average frame rate is 99 FPS, which is strong but not exceptional for a mid-range pairing.
Measured FPS Breakdown
The benchmark data records average FPS for every resolution and preset combination, with min and max values only for Medium settings. At 1920x1080, the RTX 5060 and Ryzen 5 5600F produce 201 FPS on Low, 159 FPS on Medium (min 135, max 183), 127 FPS on High, and 99 FPS on Ultra. At 2560x1440, the averages drop to 133 FPS on Low, 105 FPS on Medium (min 89, max 120), 84 FPS on High, and 65 FPS on Ultra. At 3840x2160, the numbers fall further: 74 FPS on Low, 58 FPS on Medium (min 49, max 67), 46 FPS on High, and 36 FPS on Ultra. The only preset with recorded min/max values is Medium, which shows a 18 FPS spread at 1080p, 31 FPS at 1440p, and 18 FPS at 4K—indicating moderate frame time variance. Across all resolutions, the gap between Low and Ultra is consistent: roughly 102 FPS at 1080p, 68 FPS at 1440p, and 38 FPS at 4K. This scaling shows that the GPU is the primary driver of performance differences, as raising resolution and settings both reduce average FPS substantially.
The Verdict
This PC can run Fivem at 1080p and 1440p with every preset exceeding the 60 FPS playable threshold. At 1920x1080, the best settings are Ultra, delivering an average of 99 FPS. At 2560x1440, Ultra also remains playable at 65 FPS, making it the best setting for that resolution. At 3840x2160, only Low achieves playable performance, averaging 74 FPS; Medium falls to 58 FPS, High to 46 FPS, and Ultra to 36 FPS—all below the 60 FPS line. Therefore, the verdict is clear: for 4K gaming, users must sacrifice visual quality to Low, while 1440p and 1080p allow maximum settings without dropping below playable frame rates. The data does not include any settings between Low and Medium, so it is possible that a custom preset could achieve 60 FPS at 4K, but the measured presets show only Low is viable.
CPU and GPU Roles
The performance scaling between resolutions reveals which component dominates. At 1080p Low, the combo hits 201 FPS—a very high frame rate that suggests the CPU is capable of feeding the GPU with enough data to avoid a CPU bottleneck at lower resolutions. As resolution increases to 1440p and 4K, the same Low preset drops to 133 FPS and 74 FPS respectively. This 127 FPS drop from 1080p to 4K (a 63% reduction) is far larger than any CPU-side limitation, indicating the GPU becomes the limiting factor as pixel count rises. Similarly, within each resolution, moving from Low to Ultra reduces average FPS by roughly 50% at 1080p (201 to 99), 51% at 1440p (133 to 65), and 51% at 4K (74 to 36). This consistent halving of performance when settings go from Low to Ultra points to the GPU's shading and memory bandwidth being the primary constraint. The CPU's strong single-thread benchmark score (2872 in Passmark) supports its ability to maintain high frame rates at lower resolutions, but the data shows that the RTX 5060's 8 GB GDDR7 memory and 128-bit bus are not sufficient for demanding 4K presets. At 1080p, the CPU's role is more prominent—the 201 FPS Low result is close to what many high-end CPUs achieve—but at 4K, the GPU's limits dominate, as evidenced by the sub-60 FPS results on Medium and above.
FAQ
Q: What is the playable threshold for Fivem in this benchmark?
A: The playable threshold is set at 60 FPS. Any preset that averages 60 FPS or higher is considered playable.
Q: Can this combo run Fivem at 4K with Ultra settings?
A: No. At 3840x2160 Ultra, the average frame rate is 36 FPS, well below the 60 FPS threshold. Only Low settings at 4K achieve playable performance with an average of 74 FPS.
Q: Which resolution allows the highest visual quality while maintaining 60 FPS?
A: At both 1920x1080 and 2560x1440, Ultra settings are playable, with averages of 99 FPS and 65 FPS respectively. The 1080p Ultra preset offers the highest frame rate among Ultra settings.
Q: How does the RTX 5060 compare to its nearest GPU rival in terms of benchmark score?
A: The RTX 5060 has an average score of 26331. The AMD Radeon RX 6750 XT is 1.2% slower, while the AMD Radeon 860M, NVIDIA GeForce MX550, and AMD Radeon RX 5700 XT 50th Anniversary are 0.3% to 0.8% faster.
Q: What is the rank of this CPU-GPU combination among all tested combos?
A: The combo ranks 1637th out of 3707 tested combinations, meaning it performs better than 2070 other combos (roughly 56% of the field).
Q: Does the CPU or GPU have a greater impact on Fivem performance at 1080p?
A: At 1080p Low, the combo reaches 201 FPS, which is near the upper range for many CPUs, suggesting the CPU is capable of high frame rates. However, the GPU still limits performance when settings are raised—Ultra drops to 99 FPS—so the GPU becomes the bottleneck as graphical load increases. At 1080p, the CPU is sufficient, but the GPU determines the ceiling for higher presets.