Fivem

AMD Ryzen 5 5600F and NVIDIA GeForce RTX 4090 is an extreme pairing for Fivem, where the CPU’s 85th percentile standing among all processors meets a GPU at the 88th percentile among all graphics cards. Benchmark results indicate that this combination does not merely run the game; it overwhelms it at every tested resolution and preset. The data shows that the RTX 4090’s raw compute—82.58 TFLOPS FP32 and a 1.01 TB/s memory bandwidth—creates a bottleneck situation where the Ryzen 5 5600F’s six Zen 3 cores become the limiting factor, yet even that limitation leaves headroom far beyond the 60 FPS playable threshold. Across all twelve measured configurations, the lowest average frame rate recorded is 66 FPS at 4K Ultra, meaning every single setting and resolution combo tested clears the playability bar with a minimum margin of 10%. The only point of caution is the absence of minimum frame data for several presets, but the available min/max figures—such as 90 FPS minimum at 4K Medium and 163 FPS minimum at 1440p Medium—suggest consistent frame delivery rather than erratic spikes.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Ultra, which delivers an average of 66 FPS. This is the ceiling of the tested configurations: pushing beyond Ultra is not possible within the dataset, and the 66 FPS average is only 10% above the playable threshold. For players who prioritize frame rate over visual fidelity at 4K, dropping to High yields 85 FPS, Medium produces 106 FPS, and Low reaches 135 FPS. The Ultra preset at 4K is technically playable but leaves little margin for demanding multiplayer scenarios; the data suggests that High at 85 FPS is the safer choice for consistent performance in Fivem’s crowded servers.

At 2560x1440, the best settings are also Ultra, with an average of 119 FPS—nearly double the 60 FPS threshold. The gap between presets is substantial: High runs at 153 FPS, Medium at 191 FPS, and Low at 215 FPS. The 1440p Ultra result is particularly strong because it nearly doubles the 4K Ultra figure, indicating that the RTX 4090 scales efficiently when pixel count drops. The minimum frame rate at 1440p Medium is 163 FPS, which means even the most demanding moments stay well above the playable floor.

At 1920x1080, Ultra is again the best setting, producing an average of 180 FPS. This is the highest Ultra result across all resolutions and represents a 173% improvement over the 4K Ultra score. The 1080p preset ladder is compressed: Low hits 247 FPS, Medium 227 FPS, and High 209 FPS. Notably, the 1080p Medium configuration has the most complete frame data in the entire dataset, with a minimum of 193 FPS and a maximum of 261 FPS, showing that the hardware sustains high frame rates even in the most variable conditions.

Similar Performance Alternatives

The nearestRivals data places the AMD Ryzen 5 5600F in a tight cluster of processors with nearly identical average benchmark scores. The Intel Core Ultra 5 225 is the closest match with a delta of 0%, followed by the AMD Ryzen 5 5500X3D at -0.2%, the AMD Ryzen AI 7 PRO 450 at -0.4%, and the Intel Core i9-12900T at -0.5%. These four CPUs all score within a 174-point range of the 5600F’s average, meaning any of them would produce statistically indistinguishable performance in Fivem. The 5600F’s 12 threads and 32 MB of shared L3 cache are the key specifications driving this parity, and the data indicates that players upgrading from any of these chips would see no measurable change in frame rates.

The NVIDIA GeForce RTX 4090’s nearest rivals are more surprising, given its 88th percentile ranking. The Intel Arc Pro A60 matches the 4090’s average benchmark score with a 0% delta, while the AMD Radeon Pro Vega 48 is 0.3% faster and the AMD Radeon Pro W6600M is 2.5% slower. The AMD Radeon PRO V710 is 2.9% faster. These professional-grade GPUs occupy a similar performance tier in synthetic benchmarks, but the RTX 4090’s 24 GB of GDDR6X memory and 450 W TDP indicate it is designed for different workloads. In Fivem specifically, the RTX 4090’s nearest rivals would likely produce similar average frame rates, though the 4090’s higher memory bandwidth (1.01 TB/s) gives it an edge in texture-heavy scenes.

Measured FPS Breakdown

The measured FPS data reveals a clear pattern of diminishing returns as resolution increases. At 1920x1080, the average frame rates range from 180 FPS at Ultra to 247 FPS at Low. The Medium preset at 1080p is the only configuration in the entire dataset with complete min/avg/max data: 193 FPS minimum, 227 FPS average, and 261 FPS maximum. This 68 FPS spread between minimum and maximum indicates some frame variability, but the minimum remains 222% above the playable threshold.

At 2560x1440, the averages drop by roughly 30-35% compared to 1080p. The Ultra preset averages 119 FPS, High averages 153 FPS, Medium averages 191 FPS, and Low averages 215 FPS. The Medium preset again provides the only complete frame data at this resolution: 163 FPS minimum, 191 FPS average, and 220 FPS maximum. The 57 FPS spread between minimum and maximum is slightly tighter than at 1080p, suggesting that the GPU’s 24 GB memory buffer becomes more effective at higher resolutions.

At 3840x2160, the averages fall by another 45-50%. The Ultra preset drops to 66 FPS, High to 85 FPS, Medium to 106 FPS, and Low to 135 FPS. Only the Medium preset includes minimum and maximum data: 90 FPS minimum and 122 FPS maximum. This 32 FPS spread is the narrowest of any resolution, indicating that 4K rendering is more consistent because the GPU is fully saturated. The 4K Ultra result of 66 FPS is the only configuration that approaches the 60 FPS threshold, and its lack of minimum frame data means players cannot verify worst-case performance from this dataset.

The Verdict

The verdictByResolution data confirms that this PC can run Fivem at every tested resolution and preset with a playable frame rate. At 3840x2160, all four presets—Low, Medium, High, and Ultra—are listed as playable, with Ultra achieving 66 FPS as the best settings. This means even the most visually demanding configuration clears the 60 FPS threshold, though the margin is slim. At 2560x1440, Ultra runs at 119 FPS, more than double the playable threshold, and all four presets are playable. At 1920x1080, Ultra runs at 180 FPS, triple the threshold, and again all presets are playable.

The data indicates that this combination is overkill for Fivem at 1080p and 1440p, where the GPU is never challenged. The 4K Ultra result is the only configuration where the hardware approaches its limits, and even then it maintains a 10% cushion above the playable threshold. The absence of minimum frame data for Ultra presets at all resolutions is a notable gap, but the available Medium preset data—with minimums of 90 FPS at 4K, 163 FPS at 1440p, and 193 FPS at 1080p—suggests that frame dips are unlikely to cause stuttering. The verdict is unambiguous: this PC runs Fivem exceptionally well at any resolution, with the 4K Ultra preset being the only configuration that requires any consideration for competitive play.

FAQ

Q: What is the highest preset that maintains 60 FPS at 4K resolution?

A: Ultra settings at 3840x2160 produce an average of 66 FPS, which is the most demanding playable preset. High settings deliver 85 FPS, Medium 106 FPS, and Low 135 FPS.

Q: How does the Ryzen 5 5600F compare to its closest rival in benchmark scores?

A: The Intel Core Ultra 5 225 has a 0% delta from the 5600F’s average score. The AMD Ryzen 5 5500X3D is 0.2% slower, the AMD Ryzen AI 7 PRO 450 is 0.4% slower, and the Intel Core i9-12900T is 0.5% slower.

Q: What frame rates can this PC achieve at 1440p with Ultra settings?

A: At 2560x1440, Ultra settings average 119 FPS. The Medium preset has the most complete data: 163 FPS minimum, 191 FPS average, and 220 FPS maximum.

Q: Is there any tested configuration that falls below 60 FPS?

A: No. The lowest average frame rate across all twelve measured configurations is 66 FPS at 4K Ultra. All other presets range from 85 FPS to 247 FPS.

Q: How does the RTX 4090’s benchmark score compare to its nearest rival?

A: The Intel Arc Pro A60 matches the RTX 4090’s average score with a 0% delta. The AMD Radeon Pro Vega 48 is 0.3% faster, the AMD Radeon Pro W6600M is 2.5% slower, and the AMD Radeon PRO V710 is 2.9% faster.

Q: What is the best 1080p preset for maximum frame rate?

A: Low settings at 1920x1080 deliver 247 FPS average, which is the highest frame rate in the dataset. Ultra settings still achieve 180 FPS.

How This Combo Ranks

The comboRankInGame data places this AMD Ryzen 5 5600F + NVIDIA GeForce RTX 4090 pairing at rank 300 out of 3707 tested combinations, placing it in the top 8.1% of all configurations. This ranking is driven primarily by the RTX 4090’s 88th percentile performance among all GPUs, while the CPU’s 85th percentile standing provides adequate support without becoming a liability. The rank of 300 means that 299 other combinations outperform this setup in Fivem, which is a remarkably small number given the hardware’s age—the RTX 4090 was released in 2022 and the Ryzen 5 5600F in 2025. The data suggests that this combination is near the practical ceiling for Fivem, as the 4K Ultra result of 66 FPS is only 10% above the playable threshold, leaving limited headroom for future game updates or more demanding multiplayer scenarios. For players seeking the absolute best Fivem experience, the 300th rank indicates that only a handful of more expensive or newer configurations would deliver measurably higher frame rates, and most of those would require a CPU with a higher multithreaded score than the 5600F’s 19,236 in Passmark.