Fivem

The AMD Ryzen 5 5600 paired with the NVIDIA GeForce RTX 4080 is a combination that produces a wide spread of performance across Fivem’s settings and resolutions. The data shows this combo ranks 321st out of 3707 tested configurations in this game, placing it in the top tier of tested systems. At 1080p, the pairing is overwhelmingly fast, while at 4K it remains comfortably playable even at maximum settings. The following analysis breaks down the measured FPS figures, compares the combo against similar hardware, and identifies which component carries the workload at each resolution.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the combo delivers frame rates that far exceed the 60 FPS playable threshold. With Low settings, the average FPS reaches 287, which is the highest recorded figure in the entire dataset. Medium settings produce an average of 263 FPS, with a minimum of 223 FPS and a maximum of 302 FPS. High settings average 210 FPS, while Ultra settings still maintain a strong 163 FPS average. None of the 1080p results dip below the 60 FPS threshold, and even the most demanding preset leaves substantial headroom.

Moving to 2560x1440, performance remains exceptionally high. Low settings average 219 FPS, while Medium settings average 173 FPS with a minimum of 147 FPS and a maximum of 199 FPS. High settings deliver an average of 138 FPS, and Ultra settings hold at 107 FPS average. The scaling from 1080p to 1440p shows a predictable drop in frame rates, but every preset at this resolution stays well above the playable threshold. The minimum FPS recorded at 1440p Medium is 147, which is still more than double the 60 FPS target.

At 3840x2160, performance compresses significantly but remains playable across all presets. Low settings average 122 FPS, Medium settings average 96 FPS with a minimum of 82 FPS and a maximum of 110 FPS. High settings drop to a 77 FPS average, and Ultra settings land exactly at 60 FPS average. This 4K Ultra result is the only measurement in the dataset that sits precisely at the playable threshold, meaning there is no margin for error in demanding scenes. The 4K Medium minimum of 82 FPS shows that even under load, the combo maintains a comfortable buffer above 60 FPS.

How This Combo Ranks

The combo rank of 321 out of 3707 tested combinations places this system in the 91st percentile of all tested configurations for Fivem. This is a strong result, but it is importantly the ranking reflects the entire system rather than individual components. The Ryzen 5 5600 has a percentile rank of 74 against all CPUs in the database, while the RTX 4080 has a percentile rank of 86 against all GPUs. The combination of a mid-range CPU with a high-end GPU produces a system that performs better in Fivem than either component’s individual percentile might suggest, indicating that the game benefits from the GPU’s raw throughput.

The ranking also shows that this combo outperforms the vast majority of systems tested for this game. With 3707 total combos, a rank of 321 means only about 8.7 percent of tested systems achieve higher frame rates. For a multiplayer title like Fivem, where frame consistency matters during large player gatherings, this ranking indicates the system can handle the game’s demands without requiring aggressive settings compromises. The data shows that at 1080p Ultra, the combo still produces 163 FPS average, which is far above what most systems would achieve at the same settings.

Similar Performance Alternatives

The nearest rivals for the CPU and GPU provide context for what other hardware would behave similarly. For the AMD Ryzen 5 5600, the closest alternatives in average benchmark score are the Intel Core Ultra 7 258V with a delta of 0.1 percent, the AMD Ryzen 5 8500G with a delta of 0.2 percent, the AMD EPYC 9454P with a delta of 0.2 percent, and the AMD EPYC 7713 with a delta of 0.5 percent. These CPUs all produce average benchmark scores within half a percent of the Ryzen 5 5600, meaning they would likely deliver nearly identical CPU-bound performance in Fivem. The inclusion of two EPYC server chips in this list is notable, as their high thread counts do not translate into a meaningful advantage for gaming workloads.

For the NVIDIA GeForce RTX 4080, the nearest rivals are the NVIDIA GeForce RTX 4080 SUPER with a delta of 0.1 percent, the AMD Radeon Pro W5700X with a delta of -1.1 percent, the AMD Radeon RX 6750 GRE 12 GB with a delta of -2.6 percent, and the AMD Radeon 8060S with a delta of -2.7 percent. The RTX 4080 SUPER is essentially a identical performer, with a score difference of just 0.1 percent. The other three alternatives score slightly lower on average, but the deltas are small enough that they would produce very similar frame rates in Fivem. A system built with the RTX 4080 SUPER instead of the RTX 4080 would behave almost identically, while the AMD options would be marginally slower but still in the same performance class.

The Verdict

The data clearly shows that this PC can run Fivem at every resolution and preset combination tested. At 1920x1080, the combo clears the 60 FPS threshold with enormous margin, reaching 163 FPS average at Ultra settings and 287 FPS at Low settings. At 2560x1440, all presets remain above 60 FPS, with Ultra settings producing 107 FPS average and Low settings reaching 219 FPS average. At 3840x2160, the combo still clears 60 FPS at every preset, but the Ultra settings result lands exactly at 60 FPS average, leaving no headroom.

The verdict by resolution confirms that all four settings presets are playable at each resolution. The best settings for 4K is Ultra at 60 FPS average, for 1440p it is Ultra at 107 FPS average, and for 1080p it is Ultra at 163 FPS average. Players who want a guaranteed frame rate buffer at 4K should consider High settings at 77 FPS average or Medium settings at 96 FPS average, as these provide more margin above the 60 FPS threshold. At 1440p and 1080p, Ultra settings are entirely safe with no risk of dropping below the playable threshold.

CPU and GPU Roles

The scaling between resolutions and presets reveals which component dominates performance in Fivem. The RTX 4080 has an average benchmark score of 54247, while the Ryzen 5 5600 has an average benchmark score of 20468. This disparity suggests the GPU is the primary driver of frame rates in most scenarios. However, the CPU’s role becomes more apparent at lower resolutions where the GPU has less work to do.

The data shows that at 1080p, the difference between Low and Ultra settings is 124 FPS (287 versus 163), while at 4K, the same settings span only 62 FPS (122 versus 60). This compression at higher resolutions indicates that the GPU becomes the limiting factor as pixel count increases. At 1080p, the CPU has more ability to influence frame rates, but the Ryzen 5 5600’s 6-core, 12-thread design with a boost clock of 4.40 GHz provides enough single-thread performance to avoid becoming a bottleneck. The CPU’s single-thread benchmark scores, including 3dmark_single_thread at 882 and cinebench_r23_singlecore at 2584, support its capability in gaming workloads.

At 4K, the RTX 4080’s 16 GB of GDDR6X memory and 716.8 GB/s bandwidth become the dominant factors. The transition from 1440p to 4K at Ultra settings drops the average FPS from 107 to 60, a 44 percent reduction that aligns with the increased pixel workload. The GPU’s FP32 performance of 48.74 TFLOPS and its 76 RT cores are the resources being taxed at this resolution. The CPU’s role diminishes at 4K, as the frame rate is primarily determined by the GPU’s ability to rasterize the higher pixel count.

FAQ

Q: Can this system run Fivem at 4K Ultra settings?

A: Yes, the measured data shows 60 FPS average at 3840x2160 with Ultra settings. This is exactly at the playable threshold, so there is no additional headroom for highly demanding scenes.

Q: What is the highest frame rate this combo achieves at 1080p?

A: The highest average FPS at 1920x1080 is 287 with Low settings. Medium settings produce 263 FPS average, and Ultra settings still deliver 163 FPS average.

Q: How does the Ryzen 5 5600 compare to its nearest CPU rivals?

A: The Intel Core Ultra 7 258V is 0.1 percent faster, the AMD Ryzen 5 8500G is 0.2 percent faster, and the AMD EPYC 9454P is 0.2 percent faster. The AMD EPYC 7713 is 0.5 percent faster.

Q: Is the RTX 4080 significantly faster than its nearest GPU rival?

A: The RTX 4080 SUPER scores 0.1 percent higher on average. The AMD Radeon Pro W5700X scores 1.1 percent lower, the AMD Radeon RX 6750 GRE 12 GB scores 2.6 percent lower, and the AMD Radeon 8060S scores 2.7 percent lower.

Q: Does the CPU or GPU matter more at 1440p?

A: The GPU becomes the primary factor at 1440p, as the frame rate drop from 1080p to 1440p is significant. The RTX 4080’s memory bandwidth and shader throughput determine performance more than the Ryzen 5 5600’s core count.

Q: What minimum FPS is recorded in the dataset?

A: The lowest minimum FPS recorded is 82 at 3840x2160 with Medium settings. The 1440p Medium minimum is 147 FPS, and the 1080p Medium minimum is 223 FPS.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which produces exactly 60 FPS average. This is the only result in the dataset that sits precisely at the playable threshold, so users who prefer a safety margin should choose High at 77 FPS average or Medium at 96 FPS average.

At 2560x1440, Ultra settings deliver 107 FPS average, which is the most demanding preset that clears 60 FPS. The margin above the threshold is substantial, allowing for consistent frame rates even in complex multiplayer scenarios. High settings at 138 FPS average provide additional headroom for users with high refresh rate displays.

At 1920x1080, Ultra settings produce 163 FPS average, which is the most demanding preset that stays above 60 FPS. This result offers massive headroom over the playable threshold, making it the recommended choice for competitive play. Users with high refresh rate monitors can also consider Medium settings at 263 FPS average to maximize frame rates, though this sacrifices some visual quality.