Instant compatibility check with FPS benchmarks and optimization tips
Fivem
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 45 | 58 | 72 | 91 |
| 1440p QHD | 80 | 104 | 130 | 164 |
| 1080p Full HD | 122 | 157 | 197 | 250 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Fivem on Your System
# How This Combo Ranks
The AMD Ryzen 5 5500X3D and NVIDIA GeForce RTX 3080 combination sits at rank 1048 out of 3707 tested combos for Fivem, placing it in the 72nd percentile. This is a solidly above-median pairing that demonstrates clear headroom for the game’s multiplayer workloads. The processor, with its 6 cores and 12 threads based on Zen 3 Vermeer architecture, runs at a 3.00 GHz base clock and 4.00 GHz boost, while the GPU uses the GA102 Ampere chip with 8704 shading units and 10 GB of GDDR6X memory on a 320-bit bus.
The CPU’s PassMark multithread score of 20363 and single-thread score of 2941 put it in the 85th percentile among all CPUs. The RTX 3080’s PassMark G3D score of 25086 and average benchmark score of 23172 place it in the 68th percentile among all GPUs. When combined, the data indicates this system is built for high-refresh multiplayer sessions rather than extreme 4K fidelity. The 96 MB shared L3 cache on the CPU is particularly relevant for Fivem’s server-heavy scenarios, where repeated data access patterns benefit from large cache capacity.
Benchmark results show the combo’s rank is driven more by GPU headroom than CPU limitation. At 1080p, the system pushes well past 120 FPS even at Ultra settings, which suggests the CPU is feeding frames efficiently. At 4K, the GPU becomes the limiting factor, with Ultra settings dipping below the 60 FPS threshold. The overall picture is a balanced pairing where neither component bottlenecks the other catastrophically at standard gaming resolutions.
Best Settings per Resolution
The data identifies the most demanding preset that stays at or above 60 FPS for each resolution. At 3840x2160, the best playable setting is Medium, delivering an average of 72 FPS with a minimum of 61 and maximum of 83. This is the only resolution where the system cannot run Ultra while maintaining 60 FPS. The High preset at 4K averages 58 FPS, which falls just below the playable threshold, while Ultra averages 45 FPS.
At 2560x1440, all four presets clear 60 FPS. The best setting is Ultra, which averages 80 FPS. The High preset averages 104 FPS, Medium averages 130 FPS with a minimum of 110 and maximum of 149, and Low averages 164 FPS. This resolution represents the sweet spot for the combo, offering Ultra-level visuals while keeping average frame rates comfortably above the 60 FPS floor.
At 1920x1080, the system is thoroughly playable at every preset, with Ultra averaging 122 FPS and Low reaching 250 FPS. The best setting is Ultra at 122 FPS average. Medium averages 197 FPS with a minimum of 167 and maximum of 226, while High averages 157 FPS. The 1080p results show strong scaling from Low to Ultra, with only a 51% performance drop from 250 FPS to 122 FPS, indicating the GPU has ample bandwidth and processing power for this resolution.
FAQ
Q: Can this PC run Fivem at 4K Ultra settings?
A: No. At 3840x2160 with Ultra settings, the average frame rate is 45 FPS, which falls below the 60 FPS playable threshold. The best playable 4K preset is Medium, averaging 72 FPS.
Q: What is the highest playable setting at 1440p?
A: Ultra settings at 2560x1440 average 80 FPS, making it the best playable preset at that resolution. All four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 5 5500X3D has an average benchmark score of 37018. It is 0.2% faster than the AMD Ryzen 5 5600F (score 36945) and the Intel Core Ultra 5 225 (score 36938), and 0.2% slower than the AMD Ryzen AI 7 PRO 450 (score 37093) and 0.3% slower than the Intel Core i9-12900T (score 37112). These deltas are effectively negligible in real-world gaming.
Q: Is the RTX 3080's performance close to any other GPUs?
A: The RTX 3080 has an average benchmark score of 23172. The NVIDIA P106-100 (score 23249) is 0.3% faster, the AMD Radeon Pro Vega 16 (score 23250) is 0.3% faster, the AMD Radeon RX 6600M (score 23273) is 0.4% faster, and the AMD Radeon R9 M290X (score 23276) is 0.4% faster. These rivals are within a fraction of a percent, indicating near-identical overall compute performance.
Q: What frame rates can I expect at 1080p Medium settings?
A: At 1920x1080 with Medium settings, the combo averages 197 FPS, with a minimum of 167 FPS and maximum of 226 FPS. This provides a very smooth experience for high-refresh monitors.
Q: Does the system maintain 60 FPS at 4K with any preset?
A: Yes. At 3840x2160, both Low (91 FPS average) and Medium (72 FPS average) clear the 60 FPS threshold. High (58 FPS) and Ultra (45 FPS) do not.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the AMD Ryzen 5 5600F delivers a near-identical average score of 36945, just 0.2% below the 5500X3D’s 37018. The Intel Core Ultra 5 225 sits at 36938 (0.2% lower), while the AMD Ryzen AI 7 PRO 450 scores 37093 (0.2% higher) and the Intel Core i9-12900T scores 37112 (0.3% higher). Any of these processors paired with the RTX 3080 would produce statistically indistinguishable frame rates in Fivem, since the deltas are all within 0.3%. For gaming, the 5500X3D’s large 96 MB L3 cache is the differentiator, but benchmark scores suggest minimal practical separation.
On the GPU side, the RTX 3080’s nearest rivals are unexpected: the NVIDIA P106-100 (23249, 0.3% higher), AMD Radeon Pro Vega 16 (23250, 0.3% higher), AMD Radeon RX 6600M (23273, 0.4% higher), and AMD Radeon R9 M290X (23276, 0.4% higher). These scores come from the average benchmark metric, which includes compute and older DirectX tests. In actual Fivem gameplay, the RTX 3080’s 10 GB GDDR6X memory and 760.3 GB/s bandwidth are far more relevant than these aggregate scores suggest. Nonetheless, the data shows that for pure compute throughput, these rivals are within 0.4% of the RTX 3080.
For a system builder, swapping the CPU to a Ryzen 5 5600F or Intel Core Ultra 5 225 would yield essentially the same Fivem performance. Similarly, any GPU in the nearest rivals list would behave within a fraction of a percent in synthetic benchmarks, though real-world gaming differences would be larger due to driver optimizations and feature sets. The RTX 3080’s DirectX 12 support (12 Ultimate) and 68 RT cores provide capabilities the rivals lack, but the benchmark data does not quantify those advantages for Fivem specifically.
Measured FPS Breakdown
At 3840x2160, the measured results show a clear tiering. Low settings average 91 FPS, Medium averages 72 FPS with a minimum of 61 and maximum of 83, High averages 58 FPS, and Ultra averages 45 FPS. The gap between Medium and High is 14 FPS, while the gap between High and Ultra is 13 FPS, indicating a steep performance penalty for the highest preset. The minimum FPS data is only available for Medium (61 FPS), which is just above the playable threshold.
At 2560x1440, the results are consistently strong. Low averages 164 FPS, Medium averages 130 FPS with a minimum of 110 and maximum of 149, High averages 104 FPS, and Ultra averages 80 FPS. The scaling from Ultra to Low shows a 105% increase in frame rate, demonstrating that this resolution has substantial headroom. Even the Ultra preset’s 80 FPS average leaves 20 FPS of margin above the 60 FPS threshold.
At 1920x1080, the system delivers high frame rates across all presets. Low averages 250 FPS, Medium averages 197 FPS with a minimum of 167 and maximum of 226, High averages 157 FPS, and Ultra averages 122 FPS. The minimum FPS at Medium (167) is higher than the average FPS at Ultra (122), which highlights how much performance headroom exists at 1080p. The 250 FPS ceiling at Low suggests the CPU and GPU combination is not fully taxed at this resolution, with potential for even higher frame rates on displays that support them.
The Verdict
This PC can run Fivem with playable performance at all three tested resolutions, but with different quality ceilings. At 3840x2160, the verdict is clear: Medium settings are the best playable option, averaging 72 FPS, while High and Ultra fall below the 60 FPS threshold. Low settings also clear 60 FPS at 91 FPS average, providing options for players who prioritize frame rate over visuals.
At 2560x1440, the system is fully playable at every preset, with Ultra averaging 80 FPS as the best setting. This is the recommended resolution for this combo, balancing visual fidelity with substantial frame rate headroom. All four presets exceed 60 FPS, with the lowest (Ultra) still 33% above the threshold.
At 1920x1080, the verdict is unequivocal: Ultra settings average 122 FPS, nearly double the 60 FPS threshold. This resolution offers the most comfortable experience, with every preset well above playable frame rates. The data indicates that this system is best suited for 1080p and 1440p gaming, with 4K reserved for Medium settings or lower. Players targeting 4K should consider lowering settings to Medium or accepting frame rates below 60 FPS at higher presets. The combination of the 5500X3D’s strong single-thread performance and the RTX 3080’s high bandwidth makes it a capable Fivem machine, particularly for multiplayer servers where CPU cache and GPU memory bandwidth matter.