Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Fivem
Multiplayer 2017

Fivem

74%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
145 FPS
Ultra 1080p Measured
71 FPS

1440p (2K / QHD)

Low 1440p Measured
96 FPS
Ultra 1440p Measured
47 FPS

4K (Ultra HD)

Low 4K Measured
53 FPS
Ultra 4K Measured
26 FPS
10.9ms Frame Time
16ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,479
Your CPU 37,018
Graphics Card
Required 27,716
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 26 33 42 53
1440p QHD 47 60 75 96
1080p Full HD 71 92 115 145

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 92
1920x1080 Low 145
1920x1080 Medium 115
1920x1080 Ultra 71
2560x1440 High 60
2560x1440 Low 96
2560x1440 Medium 75
2560x1440 Ultra 47
3840x2160 High 33
3840x2160 Low 53
3840x2160 Medium 42
3840x2160 Ultra 26

Performance Analysis: Fivem on Your System

How This Combo Ranks

The AMD Ryzen 5 5500X3D paired with the NVIDIA GeForce RTX 2060 lands at rank 2911 out of 3707 tested combos in the database for Fivem. This places it in the lower half of the distribution, which might seem surprising given the CPU's strong 85th percentile standing among all processors. However, the GPU tells a different story, sitting at only the 58th percentile among all graphics cards. The combination's ranking suggests that the RTX 2060 is the limiting factor here, holding back what is otherwise a very capable CPU. The data shows a pairing where the processor has substantial headroom, but the graphics card constrains overall performance in this multiplayer title.

CPU and GPU Roles

The recorded measurements reveal a clear pattern: this system becomes GPU-bound at every resolution, but the degree of GPU limitation changes as resolution scales. At 1920x1080, the CPU's strength is evident, with Low settings producing 145 FPS, which is a figure that suggests the CPU is feeding frames rapidly. Moving to Medium at the same resolution yields 115 FPS, and High still manages 92 FPS. These numbers indicate that at 1080p, the RTX 2060 is working hard but the Ryzen 5 5500X3D is not the bottleneck.

When we step up to 2560x1440, the GPU begins to show its limits more clearly. Low settings drop to 96 FPS, Medium falls to 75 FPS, and High sits at exactly 60 FPS. The percentage drops between 1080p and 1440p are substantial: Low loses about 34% of its frame rate, Medium loses 35%, and High loses 35%. This uniform scaling across presets points to a purely GPU-bound scenario, as the CPU's workload does not change much with resolution while the GPU's pixel-pushing demands increase.

At 3840x2160, the RTX 2060 is clearly overwhelmed. Even Low settings only manage 53 FPS, which is below the 60 FPS playability threshold. Medium drops to 42 FPS, High to 33 FPS, and Ultra to 26 FPS. The scaling from 1440p to 4K shows another 45% reduction on Low settings, confirming that the GPU is the dominant constraint. The CPU's role at 4K is minimal; the data implies that the Ryzen 5 5500X3D could drive significantly higher frame rates if paired with a faster graphics card, but at this resolution the RTX 2060's 6 GB of GDDR6 memory and 336.0 GB/s bandwidth simply cannot keep up.

The preset scaling within each resolution reinforces this conclusion. At 1080p, the gap between Low and Ultra is 74 FPS (145 down to 71), which shows that the GPU has enough headroom to handle increased graphical loads while the CPU maintains high frame delivery. At 1440p, the gap narrows to 49 FPS (96 down to 47), and at 4K it compresses to 27 FPS (53 down to 26). This progressive compression indicates that as resolution rises, the GPU's raw compute limits dominate, and preset changes have diminishing impact because the GPU is already saturated.

FAQ

Q: Can this combo run Fivem at 1920x1080 with Ultra settings?

A: Yes. The measured data shows an average of 71 FPS at 1080p Ultra, which clears the 60 FPS playability threshold. The database records this as a playable configuration.

Q: What is the best playable setting at 2560x1440?

A: High settings at 1440p produce exactly 60 FPS average, which meets the playability threshold. The database lists High as the best settings at this resolution, with Low (96 FPS) and Medium (75 FPS) also being playable, but Ultra drops to 47 FPS and is not playable.

Q: Is 3840x2160 playable at any setting?

A: No. The database records no playable settings at 4K. The highest average FPS at this resolution is 53 on Low, which falls short of the 60 FPS threshold. Medium, High, and Ultra all produce averages below 42 FPS.

Q: How does the RTX 2060 compare to its nearest rivals in the database?

A: The RTX 2060's average benchmark score is 15290. Its closest rival, the GeForce GTX 580, scores 15283, a delta of 0%. The Radeon 680M scores 15270 (0.1% slower), the RTX 3050 OEM scores 15199 (0.6% slower), and the Radeon RX 7600 scores 15171 (0.8% slower). This indicates the RTX 2060 sits at the top of a very tight cluster.

Q: What about the CPU's nearest rivals?

A: The Ryzen 5 5500X3D has an average benchmark score of 37018. The AMD Ryzen 5 5600F scores 36945 (0.2% slower), the Intel Core Ultra 5 225 scores 36938 (0.2% slower), and the AMD Ryzen AI 7 PRO 450 scores 37093 (0.2% faster). The Intel Core i9-12900T scores 37112 (0.3% faster). All four rivals are within a fraction of a percent of the 5500X3D, making them effectively interchangeable in performance.

Q: Does the CPU or GPU matter more for Fivem at 1080p?

A: At 1080p, the data suggests the GPU is still the primary constraint, but the CPU's headroom is visible. The 145 FPS at Low settings indicates the CPU can push frames well beyond the GPU's limits at higher presets. The CPU's percentile rank (85th) versus the GPU's (58th) further supports that the graphics card is the weaker link.

Similar Performance Alternatives

The database's nearest rival data provides clear guidance on what other hardware would behave similarly to this combo. For the CPU, the AMD Ryzen 5 5600F is nearly identical in average score (36945 vs 37018, a 0.2% difference). This means swapping the 5500X3D for a 5600F would produce virtually indistinguishable frame rates in Fivem. The Intel Core Ultra 5 225 also falls within 0.2% of the 5500X3D, offering an alternative platform choice with the same expected performance. On the faster side, the AMD Ryzen AI 7 PRO 450 and Intel Core i9-12900T are 0.2% and 0.3% faster respectively, but these differences are within measurement noise and would not yield perceptible changes in gameplay.

For the GPU, the RTX 2060's nearest rival is the GTX 580, which matches it exactly (0% delta) with an average score of 15283. This is a remarkable finding given the architectural generation gap between the two cards. The AMD Radeon 680M is 0.1% slower, meaning an integrated graphics solution could approach the RTX 2060's performance in this specific benchmark context. The RTX 3050 OEM (0.6% slower) and Radeon RX 7600 (0.8% slower) are also close, though slightly behind. In practical terms for Fivem, any of these GPUs would produce frame rates within a few percent of the RTX 2060's measured results. The data implies that if you were to build a system with a 5600F and an RX 7600, the Fivem experience would be nearly identical to the 5500X3D and RTX 2060 combo.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which records an average of 71 FPS. This is the highest quality option available while maintaining playability. The measured data also shows Medium at 115 FPS and High at 92 FPS, both well above the threshold, but Ultra represents the best visual quality that still clears the bar.

At 2560x1440, High is the most demanding playable preset, producing exactly 60 FPS average. Medium runs at 75 FPS and Low at 96 FPS, but High offers the best visual fidelity while meeting the 60 FPS requirement. Ultra at 1440p falls to 47 FPS, so it is not recommended for a smooth experience.

At 3840x2160, no preset achieves 60 FPS. The closest is Low at 53 FPS, which is 7 FPS short of the threshold. Medium records 42 FPS, High drops to 33 FPS, and Ultra bottoms out at 26 FPS. The database indicates no playable settings at 4K for this combo.

The Verdict

This PC can run Fivem, but only within specific resolution and quality boundaries. At 1920x1080, the combo handles every preset from Low (145 FPS) through Ultra (71 FPS) with all configurations clearing the 60 FPS playability threshold. This is the resolution where the system performs best, and the data shows it can deliver a smooth experience at maximum visual quality.

At 2560x1440, the system remains playable but with restrictions. High, Medium, and Low all meet the 60 FPS requirement, with High being the best playable setting at exactly 60 FPS. Ultra at 1440p produces 47 FPS, which falls below the threshold and is not recommended.

At 3840x2160, the verdict is clear: this combo cannot run Fivem at 60 FPS at any setting. The best result is 53 FPS on Low, which is below the playable threshold. The database records no playable settings for 4K. The combination of the Ryzen 5 5500X3D's strong single-thread performance (PassMark single-thread score of 2941) and the RTX 2060's mid-range capabilities means 1080p and 1440p are viable, while 4K is out of reach.

Measured FPS Breakdown

At 3840x2160, the recorded data shows a steep performance curve. Low settings produce an average of 53 FPS with no min or max values recorded. Medium settings average 42 FPS, with a minimum of 36 FPS and a maximum of 48 FPS. High settings average 33 FPS, and Ultra averages 26 FPS. The gap between Medium's minimum and maximum (12 FPS) suggests some scene-dependent variance, but overall the 4K results are consistently below the 60 FPS target.

At 2560x1440, the measurements improve substantially. Low settings reach 96 FPS average. Medium averages 75 FPS, with a minimum of 64 FPS and a maximum of 87 FPS. High hits exactly 60 FPS average. Ultra drops to 47 FPS. The Medium min/max range of 64 to 87 FPS shows that even at 1440p, there are moments where the frame rate dips close to the playability threshold, though the average remains comfortable.

At 1920x1080, the system shows its strongest results. Low settings average 145 FPS, which is the highest recorded figure in the entire dataset. Medium averages 115 FPS, with a minimum of 97 FPS and a maximum of 132 FPS. High averages 92 FPS. Ultra averages 71 FPS. The Medium min/max spread at 1080p (97 to 132 FPS) indicates that even the lowest dips stay well above the 60 FPS threshold, providing a consistently smooth experience.

The data across all resolutions shows a clear pattern: the RTX 2060 is the limiting component, and its 6 GB memory capacity and 192-bit bus become increasingly strained as resolution climbs. The CPU's high percentile ranking does not translate into 4K playability because the GPU cannot maintain frame delivery. For users targeting 1080p, this combo offers excellent performance with headroom to spare. For 1440p, it is adequate with High settings. For 4K, the data unequivocally shows this is not a viable configuration for Fivem.